How read .cvs web server?

Similar Questions

• HP z6100: HP z6100 - HOW TO RESET IP ADDRESS to PRINT VIA WEB SERVER?

  I bought two designjet z6100 printers.  I sold the first one I had running through the web server.  I had the same problem with the first, but someone talked me through how to give the printer a new IP because I could not access it through the current on the printer.

  I need someone to talk to me through this again.  I do not have the person who helped me, but coordinated.

  Help, please.

  Hello

  Since the Web server, you can change the DHCP form manual, but cannot reset.

  If you want to do a reset, you can get to the front of the printer.

  Go to the connectivity > Gigabit Ethernet > Advance > reset

• How to read the Web pages of the Japanese using IE7

  How to activate Windows XP (SP3) Media Center Edition 2005 read + Japanese + web pages on Internet Explorer 7?
  I tried Control Panel - region & language - advanced settings, but it refers to the need for a Windows XP CD I've ever had.

  No, the language and region settings are not responsible for Japanese kanji list in internt explorer 7.
  You will need to download the MUI Pack of Internet Explorer 7. You can find it on Micrsoft.com, but I don't know if this works with SP3.

  Try this, should work.

  Sayonara ;)

• How do reset us the Web integrated (built-in web server) server on our Pro Wireless 8500 A909g printers?

  We try to remotely administer printers HP OfficeJet Pro 8500 A909g Wireless

  M/N: CB023A

  They print and scan very well, and we can access the home page of each printer EWS.

  We have been asked to make a few changes and cannot go beyond the EWS username and password authentication request.

  In my view, it has been defined by a previous administrator, but him documented names of user and password we have on file do not work.

  How do reset us the EWS password?
  
  I have the default value is EMPTY, but if not, that would be the default password after reset?

  SOLVED!
  
  Then I got a job to another printer HP OfficeJet 8 X 00-
  
  All you have to do is RESTORE network defaults on the front control panel - this will reset the default value:

  (1) requirement for access password turned OFF

  (2) default user name is ADMIN

  (3) password is EMPTY

  then, on command before Panel set your IP network information, and you will then be able to access the built-in Web server and see all / manage all settings, including resetting the password to the web server integrated EWS.

  WITH THE SUPPORT OF HP NO.

• How can I send a HTTP request to a web server using TCP?

  I'm writing a HTTP string to activate a script CGI, server of our company. It seems that the OPEN TCP CONNECTION works. Can I just use the TCP WRITE function to send the HTTP request string to the server?
  Thank you
  Tim

  I know that I probably would have finished faster if I had the Internet Toolbox, but the solution ends up being pretty simple with just the TCP features.
  Here is the solution, I came with yesterday (in the case where someone else needs) after searching Protocols TCP as suggested by "Laboratory Viewer" and examine details in the riding of developer. It ends up being only a string of 4 line.

  GET HTTP://proxyserver/path/file.asp?id=test HTTP/1.1
  HOMEroxyserver

  The first line of the string is made up of three things:
  (1) the GET command
  (2) the URL of the program target (in this case an ASP program that distributes a message preset)
  NOTE that in this case, the URL contained "HTTP://proxyserver" and not only the path to the file. If your not using a proxy server, you can probably omit the name of the server of the URL, but you must always the name of the host server to the second line.
  (3) the HTTP version used

  The second line is the host server.

  The last two lines are empty, but the two are apparently necessary to properly close the TCP request.

  Vi uses an OPEN TCP CONNECTION to connect to port 80, then the 4 line string is sent with a WRITING of TCP and the connection is closed with a NARROW CONNECTION of TCP.

  In my application, when the piece of equipment monitored by LabVIEW begins to enter a dangerous to use, LabVIEW uses this vi to send the HTTP request through the TCP connection and a program of target ASP on the company's web server. The ASP reads the message ID (? id = test) and sends the message page and the text messaging appropriate to maintenance and engineering personnel. People warned by text pagers are supposed to respond immediately.

  Our DSI wrote the ASP that allows you to set the ID of multiple message with different distribution lists. Each message is triggered with a different ID of the virtual instrument according to the gravity of the situation.

  Thanks to other amateurs who have published their questions and their answers. Hope someone else finds this useful.

• How to: Perform a Firmware Upgrade using the integrated Web server for HP printers

  Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.

  Hope this video is useful if you find that it had to update the firmware on your HP printer.

• How to configure to allow users in my web server behind a PIX 501

  I have 1 web server, 4 web hosting sites. IP addresses are like:

  the area of the web server itself: 192.168.111.11

  1 web site on this box has IP 192.168.111.101

  2nd ............................................ 192.168.111.102

  3rd ............................................. 192.168.111.103

  4th ............................................. 192.168.111.104

  My OUTSIDE interface (say) 205.200.20.5

  My INSIDE interface has 192.168.111.1

  I want to leave the outside web traffic in my web server box that hosts 4 sites. I only let people with HTTP and HTTPS.

  How should I do and for purposes of flexibility, say also tomorrow I want to host my site on a different web server #3 but always with the same IP address, can I selectively route certain web traffic to the boxes in different web server?

  Also, I want to open another port, say, 8080 for administrative purposes. Can I route HTTP or HTTPS, addressed to some port # to the Web server also?

  You will need to create static port mapped, but if you have only the external IP address a people can connect to, they will need to connect to a specific port in the URL to differentiate which internal web server, they really want to go.

  For example:

  > static (inside, outside) tcp 205.200.20.5 80 192.168.111.101 80 netmask 255.255.255.255

  > static (inside, outside) tcp 205.200.20.5 81 192.168.111.102 80 netmask 255.255.255.255

  > static (inside, outside) tcp 205.200.20.5 82 192.168.111.103 80 netmask 255.255.255.255

  > static (inside, outside) tcp 205.200.20.5 80 83 192.168.111.104 netmask 255.255.255.255

  maps of connections to 205.200.20.5 on port 80 through to port 80 on 192.168.111.101. Connections inbound to port 81 will be mapped through to port 80 on 192.168.111.102. Connections incoming on port 82 will be mapped through to port 80 on 192.168.111.103 and so on.

  You cannot map just all incoming traffic on port 80 to 4 different internal web servers, cause how the PIX will know which send traffic to.

  To allow access, as well as the static shown bove, you must:

  > list of allowed inbound tcp access any host 205.200.20.5 eq 80

  > list of allowed inbound tcp access any host 205.200.20.5 eq 81

  > list of allowed inbound tcp access any host 205.200.20.5 eq 82

  > list of allowed inbound tcp access any host 205.200.20.5 eq 83

  > list of allowed inbound tcp access any host 205.200.20.5 eq 443

  > interface entering outside acess group

  HTTPS is also going to be a problem, to do the same on HTTP, you need to use different ports to differentiate what specific internal web server that you want to that they go (and allow these ports in your "incoming" ACL above).

  To port 8080, just follow these steps:

  > static (inside, outside) 205.200.20.5 tcp 8080 192.168.111.10x 8080 netmask 255.255.255.255

  > list of allowed inbound tcp access any host 205.200.20.5 port 8080

  As you can probably guess, this won't work very well if you have only one external IP address, because users will not know to specify a specific port number so that they get through an internal host specific. You may have a single external address for each web server internal to this work in reality.

• How can I access the web server by using sound!

  I have a LAN with the address 192.168.2.0 255.255.255.0.My internal address is 192.168.0.22, it map to the 61.154.9.64 address (public). How can my internal hosts access to the web server using sound!

  DNAT (Destination NAT) comes to mind - click here to see if it helps:

  http://www.Cisco.com/warp/public/110/alias.html

  Jay

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• EBS 11i: how to disconnect users who are web server and not yet on forms

  Hi all
  
  I would like to know how we can disconnect users that are web server and server not yet on the forms.
  What we do is the following:
  Adapcctl.sh for the 1-stop web server stop
  2-change AppsLocalLogin.jsp to a static page that say we are in maintenance
  3 - start web server adapcctl.sh start to ensure that users can see maintenance page
  
  The problem is users finding themselves in the web server (first page) but who have not yet open forms pages can still access the app after the point number 3-
  
  Is there a solution for this problem? Do know us what users are on the web server, but not in the forms?
  
  Thanks in advance.

  So in servlet mode, everyone will be disconnected

  Fix.

  What type of customizations will be unavailable? Functional customizations? New tables, simultaneous new programs, new data loaded? The thesis is available even without bouncing apache.

  Since you have posted this question in the forum 'Technology - OA framework', I assumed that we are talking about only jsp pages.

  Thank you
  Hussein

• How to publish your site to one web server (other than the Business Catalyst)

  I want to know how to publish my site by uploading files to a web server Godaddy when I click on publish the only option I have is to use Business Catalyst, I want to use my Godaddy hosting and my own domain name.

  Thank you for your help.

  Carmen

  Hello

  As I know, the version you use for Adobe Muse is 1.1 which is an older version of Muse.

  This feature has been added in the latest version of Adobe Muse.

  I would you please uninstall Adobe Muse from your computer user n suggest the link below and download and install the latest version of Adobe Muse on your computer:

  Adobe Muse for Mac: http://www.adobe.com/go/muse_latest_mac

  Adobe Muse for Win: http://www.adobe.com/go/muse_latest_win

  I hope this helps.

  Kind regards

  Sachin

• How do I know if the Web server is slow or apex database is slow

  I want to test to see if the Web server is initially slow to load the page or database is...
  
  Anyone know how? or how to check the http server is well configured?
  
  Thank you
  Dean

  Hello

  When you turn on debugging, then check the debugging information, you can see the time required for each step. This is the best option

  Alternatively, you can install the application in the Oracle's Web site (workspace online giving for free) and try it.
  But when you do this, you will get more time to get response because of the speed of the internet.

  Another way is to to execute the sql much time codes in your app through sql and compare then against the application time.

  * If the response is useful the ce mark.

• R12 - how to find the exact form, report, and Web Server Version

  Hi DBAs,
  
  
  How can I find the version of web server, report and exact form in environments of R12.
  
  Thank you
  -Samar-

  If you're on 11i, pl see MOS Doc 466890.1 (Script to find the Apache, Java, Jinitiator, version of forms and details of the JVM for Oracle E-Business Suite 11i)

  For R12, see Doc 468311.1 (Script to find the Apache, Java, JRE, Forms for Oracle E-Business Suite R12 version)

  HTH
  Srini

• How to join a web server with a GPRS connection?

  Hello

  We have developed a cRio Datalogger and we control in a control panel with the cRio connected to our LAN.

  Now, we want to make the connection even the cRio with a Modem - Router Multitech GPRS (a Multimodem with DynDns capabilities). The problem is that our GPRS service provider gives a private IP, so we cannot access the cRio from the internet.

  We did a test with a sample that comes with Labview, a TCP connection multiclient, we run the vi client in a PC connected to the internet with GPRS Modem and server in another PC in our local network. The perfect example is run. In the vi client we have added a few indicators to indicate the network address a remote port, but we cannot open a table of customer order vi from the computer running the vi server, using the collected information. The network address, it is not an IP number is a name and to our surprise, the remote port number is different than the port used by the example.

  Conclusion, we can make a TCP/IP connection if the communication is started by the device with GPRS Modem, but we cannot do the opposite. The problem is the same to have a web server running on a PC in a LAN and want to access it from the internet without having access to the router configuration.

  And because the remote connection of façade is started by the PC who want to open us cannot operate.

  Any idea is possible, we want to do this?

  With the help of:

  LV 8.5.1

  Thank you

  Hello

  We solved the problem by using a SIM with mobile broadband enabled. With this service, the cell phone company has an IP address public (here in Argentina).

• How to allow the clean-up actions to be taken by a reentrant clone before he is killed, seen through the web server, through a narrow browser?

  Here's a question I'll get lucky with.  I have a VI, set to be reentrant, broadcast via the web server.  The main instance of the VI is never worked with: it's a clone whenever someone accesses the correct URL, and the user interacts with the newly created clone (never the main forum).  A clone is able to configure and calling instrument VI when good IDs are entered, which translates to browser popups that are controllable on the end of the user (even if only one user ever does both. To clarify, many clones can be opened simultaneously for connection purposes, but that a user never interacts with the instruments that are not themselves reentrant).

  If the user clicks on my Logout button in their browser, it is trivial to close these instruments other, independent and properly clean.  But if the user simply click on the red X in their browser, it is non-stop and the instruments that the clone called stay open on the server, when they close.

  My experience so far:

  No close panel? event seems to be triggered in the clone.  The clone simply cease to be.

  The remote_panel_connections property doesn't seem to work properly in this case (I have not had luck so far), since it is possible that more than a clone to be active and that the main parent who is spawning clones stays running, but is not interacted with in some way.

  What I need:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  --------------

  I would like to avoid forcing the instruments that the clone call to constantly query to see if the VI clone is present on the network.  If there is no other solution, but this, I would appreciate a suggestion as to the intensive way less code and resources to implement this type of interrogation, as the instruments are really designed to be totally independent after they are called, rather than under vi.

  Thanks for all comments, let me know if you need more information.

  MTdev wrote:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  When a VI stops running, any reference as a queue is also cancelled.  You can make use of this fact.  If your original clone VI could launch a second reentrant VI, which remains active, you could channel all communications to the instruments via VI second using a queue created in the first.  When the first VI disappears, it will trigger an error waiting waiting VI in the second (no vote office is involved).  The second VI can take all the necessary measures.