Similar Questions

• What is the web server integrated for Windows XP Professional?

  Hello

  I would like to know what the web server integrated for Windows XP Professional.

  I don't know of a free web server like Apache or IIS.

  I want to host my site on the net using the web server integrated in XP (not IIS).

  Thanks in advance.

  It is not just any server web, other than IIS, integrated with Windows XP Professional.

  You think perhaps of Personal Web Server (PWS) which was part of the old operating systems like Windows NT.  Which no longer exists in Windows XP Professional - it has been replaced by IIS.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• How to allow the clean-up actions to be taken by a reentrant clone before he is killed, seen through the web server, through a narrow browser?

  Here's a question I'll get lucky with.  I have a VI, set to be reentrant, broadcast via the web server.  The main instance of the VI is never worked with: it's a clone whenever someone accesses the correct URL, and the user interacts with the newly created clone (never the main forum).  A clone is able to configure and calling instrument VI when good IDs are entered, which translates to browser popups that are controllable on the end of the user (even if only one user ever does both. To clarify, many clones can be opened simultaneously for connection purposes, but that a user never interacts with the instruments that are not themselves reentrant).

  If the user clicks on my Logout button in their browser, it is trivial to close these instruments other, independent and properly clean.  But if the user simply click on the red X in their browser, it is non-stop and the instruments that the clone called stay open on the server, when they close.

  My experience so far:

  No close panel? event seems to be triggered in the clone.  The clone simply cease to be.

  The remote_panel_connections property doesn't seem to work properly in this case (I have not had luck so far), since it is possible that more than a clone to be active and that the main parent who is spawning clones stays running, but is not interacted with in some way.

  What I need:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  --------------

  I would like to avoid forcing the instruments that the clone call to constantly query to see if the VI clone is present on the network.  If there is no other solution, but this, I would appreciate a suggestion as to the intensive way less code and resources to implement this type of interrogation, as the instruments are really designed to be totally independent after they are called, rather than under vi.

  Thanks for all comments, let me know if you need more information.

  MTdev wrote:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  When a VI stops running, any reference as a queue is also cancelled.  You can make use of this fact.  If your original clone VI could launch a second reentrant VI, which remains active, you could channel all communications to the instruments via VI second using a queue created in the first.  When the first VI disappears, it will trigger an error waiting waiting VI in the second (no vote office is involved).  The second VI can take all the necessary measures.

• How can I access the web server by using sound!

  I have a LAN with the address 192.168.2.0 255.255.255.0.My internal address is 192.168.0.22, it map to the 61.154.9.64 address (public). How can my internal hosts access to the web server using sound!

  DNAT (Destination NAT) comes to mind - click here to see if it helps:

  http://www.Cisco.com/warp/public/110/alias.html

  Jay

• How do I know what the maximum number of agents I can put on a hyperic serv

  How do I know what the maximum number of agents I can put on a hyperic server. ?? IM using the built in database on a linux unbuntu 4 cpu system ' s2592 MHZ. 7GB of Ram. I assumed that the
  disk space can be the most important question? Any suggestions or any help to determine when to stop adding customers would be useful. We can use open source, but are also
  talk about the EE version. The Hyperic server type would make a difference in space etc.?

  Disk i/o is probably a bit more critical than the disk space that the DB generally is not larger than 10-15 concerts.

  Ability wise, your system is CPU/RAM.  Disk i/o will probably be your main bottleneck and the thing that will determine the maximum number of agents that can have on the server.

  Splitting of the DB from the HQ server would certainly help in the perspective of General load.  Definitely put the DB a system with several piles of discs (part of a San, fast raid) will help you in the disk i/o.

  If I was trying to answer the same question, I guess that I look at the Scriptures on disk on the DB as starting point, test the drive with systat/iostat or something to see what the drive is capable of in terms of read/write speeds and also look at postgres for slow queries, duration of execution of query, used memory and cpu.  Naturally, I would do the majority of "look at her" go to HQ itself :)

  Post edited by: ama

• How to make a jad file and cod file to a single file for hosting on the web server

  Hello

  I want to make the jad file and cod file is a single file, which must be installed in the blackberry.

  When I load the jad without cod file file, it loads the app

  but when I load the jad file cod file, it loads the application on the blackberry device.

  I only want a single file to be uplaoded to the server for the installation of the application.

  Help, please

  I want it to install the web server to the BlackBerry smartphone.

  Thanks and greetings

  Anthony singh

  This is not possible, that both jad and cod is necessary to install an OTA application. the jad file contains a description of the application, the cod is the real application.

• How can I download my blog on the web server using DW?

  I need add custom on my blog domain and transfer it to the web server. can someone help me. any help kindly appreciated...

  [link removed by the host of the forum]

  my website is a blogspot. However, there is no database... I have the .mu domain so I need to add this domain. Transfer to web server... Travel destinations | Natural world | Travel better Places. Natural wonders | Travel guide

• How to change the Web server from one server to another server

  Hi all
  
  Can you please provide the document to change the location of the web server from one server to another server?
  
  Thanks in advance.
  
  Thank you and best regards,
  Siva Prasad B

  Siva Prasad says:
  Hi Michel,.

  Coping PS_HOME just move the web server?

  And Michel and I said earlier that you need to reinstall your Web server... and to redeploy the PIA, which is not clear?

  Nicolas.

• Not possible to activate the scripts on the Web server

  Hello

  I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:

  <% for (i=0; i<3; i++) {
    ...some text...
   } %>

  According to this document NOR, I first need to enable scripting:

  To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.

  I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).

  Anyone know how to activate the ESP script?

  Version: LV 2012.

  Best regards, Jan

  Hi Jan,

  In fact, you use the ESP file instead of a static HTML file.  For example, if we had the static html file:

  Hello world

  This file can be located at something like /MyWebService/HelloWorld.html.

  If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP.  In this case, your code might look like:

  <>

  var xname = form ['name'];

  %>

  Hello, @@xname

  The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble

  

  In this example, the string "Jan" is passed to the terminal of the value of the VI.  What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.

  So, back to your original question.  You embed not ESP breast and the HTML document.  Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method.  While the paper you mentioned earlier has an example project in that you can use as a reference

• start the Web server in different folders

  I developed a compiled VI (Smarts - Net .exe) that has been designed to operate in a specific folder (\Smarts-Net) and activated the Server Web page of Smarts - Net .html in the same folder.  So far so good.

  The application receives data in real time produced another of our programs and generates graphs to show "what happens".

  My clients would like run multiple instances of my program for their customers, but want to isolate their customer 'A' customer 'B' so that they cannot display the data on the other.  I can start my application using different IP ports so that I can have multiple views, but I want to further isolate the data of the customer in different folders.

  I did a 'manager' program that will create a subfolder of the folder in my main application (\Smarts-Net) so that it would appear as "\Smarts-Net\JobA" and copy all the files in the main folder in the new subfolder.  I then change the of Smarts - Net .ini file with the new pathname of the file and the new port like this number:

  [Smarts-Net]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  Server.TCP.servic = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.DirectoryIndex = "index.htm"
  WebServer.LogEnabled = True
  WebServer.LogPath=C:\Smarts-Net\Logs\Smarts-Net.log
  WebServer.MimeTypes = (a LOT of Mime types in here... I left aside for this post)
  WebServer.Port = 9501
  WebServer.Enabled = True
  WebServer.RootPath=C:\Smarts-Net\JobA
  WebServer.TcpAccess = "" + c * ' "
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  After you change the .ini file, I start the application (Smarts - Net .exe) to the new folder.

  This is where I need help.  If I try to display the VI from another computer using an address like http://snape:9600/JobA/Smarts-Net.html, I get an "HTTP 404 - File not found" error.  But, if I try to http://snape:9600 / Smarts - Net .html, I get the VI Panel!

  Thus, it seems that I can change the Port in the .ini file, but not the RootPath.  Does anyone know how to get the html to load from a different folder from the one specified when I created the application code?

  Hello Steve,.

  From your description it looks that the web server is already doing what you say you need for.

  There is a difference between the URL path, the path that is entered in the browser and the path of file system, the location of the file on the disk.

  The WebServer.RootPath token specifies the directory of the file system that corresponds to the root directory, "/", in the URL. You have specified C:\Smarts-Net\JobA as root your path so all files in this directory will be the URL of the http://mycomputer:myport / myFile. If you want the URL of http://mycomputer:myport/Logan/myFile then you need to have your root C:\Smarts-Net\ directory.

  Does make sense?

  Nathan

• run the Web server in vmware

  Hello
  I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system
  I put things in the host operating system, follow
  router setting page (shared ip settings page)
  1 DHCP using OFF
  2 DMZ host server using on 192.168.10.201
  3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81
  TCP/IP
  1 use the following IP 192.168.10.201
  2 gateway 192.168.10.1
  3. the DNS settings of
  4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8
  for now, when someone tries to access my WAN IP then page host server is apear (from external network)
  If I stop server Web host then cannot access my WAN IP

  and in VMware, I put the (Windows XP Pro)
  TCP/IP configuration
  1 use the following IP 192.168.88.201
  2. default gateway 192.168.88.2
  3. the DNS settings of
  4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8
  5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81
  and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear
  but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of
  How can I make the Web server of the guest to access other networks operating system?
  in the guest operating system, I can access Web server of the customer by access 192.168.10.201
  but I can't access Web server of the client by typing host operating system access the 192.168.10.201
  any ideas? My version of vmware's vmware-workstation - 6.5.2 for windows

  Hi Teayun,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you

  http://www.VMware.com/support/
  http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PIX 501 problems with the web server internal.

  I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.

  Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.

  Then I would like my setup now get help and also how to do when using other ports and SSL later.

  Thanks Thomas!

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  alfta hostname

  domain ciscopix.com

  names of

  name 192.168.1.16 TerminalPC

  name 192.168.3.0 Lager

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager

  outside_cryptomap_60 ip access list allow

  192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  outside_access_in tcp allowed access list all eq www

  host 62.108.197.90 eq www

  IP outdoor 62.108.197.90 255.255.255.192

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 62.108.197.10 255.255.255.255 outside

  location of PDM 62.108.197.11 255.255.255.255 outside

  location of PDM 192.168.1.0 255.255.255.255 inside

  location of PDM TerminalPC 255.255.255.255 inside

  location of PDM 192.168.2.0 255.255.255.0 outside

  location of PDM Lager 255.255.255.0 outside

  location of PDM 192.168.2.0 255.255.255.0 inside

  location of PDM 62.108.197.137 255.255.255.255 outside

  location of PDM 62.108.197.137 255.255.255.255 inside

  location of PDM 195.67.210.72 255.255.255.255 outside

  location of PDM 62.108.197.90 255.255.255.255 inside

  PDM logging 100 information

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1

  Enable http server

  http 62.108.197.10 255.255.255.255 outside

  http 62.108.197.11 255.255.255.255 outside

  http 195.67.210.72 255.255.255.255 outside

  http 192.168.1.0 255.255.255.0 inside

  http 62.108.197.137 255.255.255.255 inside

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp strong - esp-sha-hmac

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  peer set card crypto outside_map 20 195.198.46.88

  outside_map card crypto 20 the transform-set ESP-DES-MD5 value

  outside_map 40 ipsec-isakmp crypto map

  card crypto outside_map 40 correspondence address outside_cryptomap_40

  peer set card crypto outside_map 40 62.108.197.137

  outside_map card crypto 40 the transform-set ESP-DES-MD5 value

  outside_map 60 ipsec-isakmp crypto map

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 195.198.46.88

  card crypto outside_map 60 the transform-set ESP-DES-MD5 value

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 62.108.197.137 netmask 255.255.255.255

  ISAKMP key * address 195.198.46.88 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 sha hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet 192.168.1.0 255.255.255.255 inside

  Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www

  And a new application:

  outside_access_in list access permit tcp any host 62.108.197.90 eq www

  Access-group outside_access_in in interface outside

  * You have the group-access above on your original configuration message, BUT not on the above post.

  Don't forget to issue clear xlate after the change and also record with write mem.

  Try to do this in the pix CLI instead of using PDM.

  Hope this helps and let me know how you go.

  Jay

• PIX 501 in the firewall of the Web server

  Hello

  At the suggestion of a colleague, we bought a firewall PIX 501 to protect our new Win2003 web server and a UNIX/Oracle DB server.

  I've never worked with before firewalls.

  Our servers are located in a cage at the ISP and belong to us. There are only two servers providing web site. I have read the documentation in the Getting Started book and it does not answer my question.

  We have 2 web sites with different IP numbers on our web server. Let's say 140.5.5.4 and 140.5.5.5. I understand that I have will redefine the numbers with the firewall (192,...) but I do not understand how the routers at the ISP will be able to route requests for two websites to the firewall when it has one IP number, say 140.5.5.1?

  Any help is appreciated.

  Thank you, Jerry

  Jerry,

  what you are referring is called port forwarding. Whether you a PIX with a public IP address 12.1.1.1 and your web servers are respectively and 12.1.1.2 12.1.1.3. Port forwarding is really a 2 step process:

  * a static translation of the public IP address of the PIX (12.1.1.1) at the address of the web server (12.1.1.2)...

  static (inside, outside) tcp 12.1.1.1 12.1.1.2 www www netmask 255.255.255.255 0 0

  * an intermediate statement basically "all web requests should be allowed in the pix outside of the interface"...

  driving permit tcp host 12.1.1.1 eq www everything

  Here is a link that will help you to clarify this point:

  www.Cisco.com/warp/Customer/707/28.html

  This should help you get started. Regarding the basic configuration, it takes config examples on the Cisco site, if you have access CCO.

  Let me know if it helps.

  Rob H.

• Uploading to FTP host... only works with the file of the Web server root

  When I download a Muse site to the root of the Web server, everything works as expected with the obvious comparison.

  But if I want to download on a file/folder existing... it doesn't work. Muse download files but no files are added on my Web server.

  I know how to add the path if I do something wrong or there at - it a bug somewhere?

  Thank you.

  I should add that the Muse site emergency or any html Web site doesn't not any sense. Backup is only valid for cms. And this isn't just a copy of the files in the site, it has a copy of the database. Muse has no database. Backup of the Muse - is file.muse, which can be placed anywhere.

• Unable to connect to port 80 on the web server on host Ubuntu guest

  I have a very strange problem. I've been running a VM of 14.04 Ubuntu on my MBP under VMware Fusion for some time. I have re-installed Yosemite during the weekend for a clean installation trying to solve some of the problems I had. I now have my Ubuntu VM up and running. All right, except that I can't hit the web server on the virtual machine.

  I can access the virtual machine in a variety of different ways!

  • Ping: I can ping
  • SSH: I can ssh in
  • psql: I can connect to the database remotely via port 5432
  • NFS: can I get the files of the virtual machine files on my hard drive
  • Tomcat: I can access my web application directly through Tomcat on port 8080

  When I do a scan of port of the virtual machine, I get this:

  Port scan started...

  Host port scan: 10.39.186.13

  Open TCP Port: 22 ssh

  Open TCP Port: 111 sunrpc

  Open TCP Port: 389 ldap

  Open TCP Port: 2049 nfsd

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5432 postgresql

  Open TCP Port: 8000 irdmi

  Open TCP Port: 8080 http-alt

  Open TCP Port: 8104

  Open TCP Port: 37805

  Open TCP Port: 41301

  Open TCP Port: 42060

  Open TCP Port: 55224

  Open TCP Port: 60974

  Port scan has completed...

  Port 80 is not even there. The virtual machine itself, I can access the site via port 80:

  wget xnat@xnatdev:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/

  Resolution xnatdev.wurstworks.com (xnatdev.wurstworks.com)... 127.0.0.1

  Connection to xnatdev.wurstworks.com (xnatdev.wurstworks.com) | 127.0.0.1 |: 80... connected.

  Query HTTP sent, awaiting response... 302 Found

  Location: http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4 [next]

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4

  Reuse an existing connection to xnatdev.wurstworks.com:80.

  Query HTTP sent, awaiting response... 200 OK

  Length: unspecified [text/html]

  Record on: 'index.html '.

  [ <=>                                                                                         ] 12,818      --.-K/s   in 0.001s

  2015-06-22 11:20:50 (11.2 MB/s) - 'index.html' saved [12818]

  But the host OS, I get this:

  wget rherrick@Aerys:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:21:50- http://xnatdev.wurstworks.com/

  Resolving xnatdev.wurstworks.com... 10.39.186.13

  Connection to xnatdev.wurstworks.com | 10.39.186.13 |: 80... has failed: connection refused.

  I tried switching between NAT and open networking (I know that I had to work with NAT before, but I'm willing to try anything at this point).

  I'm on OS X 10.10.3 and the most recent, and VMware Fusion 7.1.2. Any ideas on how to get this working would be greatly appreciated!

  OK, got it market. The issue was the listen directive in configuring nginx for connecting Tomcat. I'd put it domain name FULL and port 80 on the server, but something I did is the determination of the FULL domain to 127.0.0.1 instead of the IP DHCP-published name. If this does not work because the incoming request has been the full domain name of host configured in my/etc/hosts, OS, then nginx not pair together configuring nginx for the domain since listening has been screwed up.