How should I correctly call ESXi 4.1 variable kickstart in the firstboot % section?
I have adjustments with a new article that I added to a kickstart file. The new article is supposed to retrieve the MAC address for vmnic0, then grep MAC address of a file to get the name of the server host and other IP addresses.
Seems I have fixed my problem here.
A couple of notes:
First OFF... by setting my variables, I had a few redundant grep commands in there. Was not cause anything to fail, but just make note.
Secondly, the section 'network - bootproto = dhcp - device = vmnic0 - addvmportgroup = 0' seems to have been the culprit. I can't say exactly where it was originally my script to fail, but if you use DHCP, the server received different DNS servers that caused the script to fail. I tried to use IP addresses instead of that in my line of wget, but it still fails. The newspapers did not help to me clue as to why it is produced either. Quite bizarre.
In any case, I decided to just change the line to use a "dummy" host name and IP address, then run a change of address and hostname IP later based on the txt file that lists the IP addresses.
Tags: VMware
Similar Questions
-
I have a downloaded .pdf file. When I click on a page (this happens for each page) he follows me to a link open my browser. How shoul delete who? I tried to delete all the hyperlinkes but remained! Thank you.
After seeing a few screenshots of the file I think I see what's happening now. There is a watermark diagonal URL through the page that is converted to a link automatically by the application. Disable it go to Edition - Preferences - general and uncheck the box that says "create links from URLS".
-
I can't locate the addresses in my address book because of a separate TBird problem which is apparently solved by technical experts, but I also have this AddressBook problem unrelated. When I start typing an e-mail address in the "to:" slot, Thunderbird end address since we can see it in the address book (but I don't). Then he words the address and insert it into the To: field. But, given that the address is blurred, it does not work. I have no idea that the address is blurred. It looks something like this when Thunderbird is done with it: "[email protected]@gmail.com."
Removal and restoration of the profile makes no difference, as export/import of the contents of the address book as an .ldif file makes no difference. I asked this question before, but didn't get any help, so I try again.
This means that a new type of auto-complete was introduced in the last version, but it has been insufficiently tested, and if several other previously hidden bugs have emerged. You can read the discussion (and add your vote for its importance) here:
-
Recently, I added two accounts in Thunderbird and everything seemed to go well. Today I used one of the new accounts and wanted to switch to my old account Edurostream. But he was not found. Are there new accounts and another former account. If I go on 'accounts' Edurostream is still there, but there is no way that I know to go from there to the Inbox for this account. There is no error message. I use the latest version of Thunderbird (24.6)
I suppose that if I delete the Edurostream account, any mail downloaded from Edurostream will remain in the Inbox of the local folders.
Yes. old messages will remain in the local folders that these files are on your computer.
-
I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you
Hi Sheldon,
Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.You might try to tell scientists on TechNet on your question to see if they have a better answer for you: -
Automatically select the correct check box based on choices made in the previous section?
With the help of LiveCycle to create a form that contains a table. This table has 3 columns with 15 boxes in each column.
Here are these 15 rows 3 more boxes that have calculated values. In each row of the table one of the checkboxes can be active at a time.
Based on the majority of choices in a column of some, the calculated corresponding checkbox must be verified. (If most of the choices are made in column 1, then the 1st calculated box must be marked, etc...)
The sentence that I am writing the JavaScript code that selects the checkbox correctly calculated. Currently, I'm just trying to understand it with only 3 first lines and I can reproduce the template after.
Table e.g.: ("BOLD" is calculated)
CheckBox20 CheckBox35 CheckBox50 CheckBox21 CheckBox36 CheckBox51 CheckBox22 CheckBox37 CheckBox52 [CheckBox66] [CheckBox67] [CheckBox68]
Here's the code I came up with that day, but it does not just anyone, although when I used it it worked just to 2 columns. (just added the part about the third column in the instructions 'or')
(In the script for the calculation of box 66)
//larger values than other columns if ((Row1.CheckBox20.rawValue == "") + (Row2.CheckBox21.rawValue == "") + (Row3.CheckBox22.rawValue == "") > (Row1.CheckBox35.rawValue == "") + (Row2.CheckBox36.rawValue == "") + (Row3.CheckBox37.rawValue == "") || (Row1.CheckBox50.rawValue == "") + (Row2.CheckBox51.rawValue == "") + (Row3.CheckBox52.rawValue == "")) {this.rawValue = "0";} //smaller values than other columns if ((Row1.CheckBox35.rawValue == "") + (Row2.CheckBox36.rawValue == "") + (Row3.CheckBox37.rawValue == "") || (Row1.CheckBox50.rawValue == "") + (Row2.CheckBox51.rawValue == "") + (Row3.CheckBox52.rawValue == "") > (Row1.CheckBox20.rawValue == "") + (Row2.CheckBox21.rawValue == "") + (Row3.CheckBox22.rawValue == "")) {this.rawValue = "1";}
I'm new to JavaScript for all advice is appreciated.
Looking at the conditions, it seems you are trying to say "If column 1 column 2 or column 3, then do something." JavaScript cannot read conditions like that. It's playback "if (column 1 column 2) GOLD (column 3), ' and he doesn't know what to do with this issue of column 3, except if it is 0 or 1.
Here is an example of use of only two lines and three columns. The rawValues are 0 and 1 for each check box. I have it set so that if column 1 has several checkboxes, then Col1 gets checked. Similarly, the col2 or 3 boxes will be checked if their columns are the most populated. I don't get the opportunity to have several boxes marked if there are two columns that have the same number of boxes checked. (You can do this by just changing > to > = in the conditions.)
-
How to create impulses cause a pulse width Variable AND at the same time
Hi all
I have a NI PCI-6251 that comes with 2 counters, a FREQOUT port and then some DIO, DAC and ADC. I want to trigger a pulse of variable width (easy to do with two counters) and a frequency closed, exit at the same time. So, I want to end up with a line that will display TOP for some variable time, while the other exits a train of pulses for a time variable. It is easy to do if you have 4 counters but I don't have one. Does anyone have an idea to implement these two things AND making them trigger at the same time with the PCI-6251 card?
The line is high for as long as your pulse train controlled?
If so, set up the first counter as output pulse, configure the 2nd as output continuous meter but with the internal of the first counter output as its trigger to pause (pause when it is low). Start the 2nd meter before the first.
If not, you will need to use the digital output to replace at least one of the counters (max sampling rate is 10 MHz, so this would give less resolution compared to the time base of 80 MHz counters). So you would simply write the waveform predetermined in the buffer and he clock at the desired rate and the number of samples to give the signal that you want. You need to generate some other subsystem as FreqOut clock.
Best regards
-
How to convert a string to a number Variable and store the decimal
Hello!
Here's my problem!
I get information from a source that I can't control. He sends me the number in to form chains.
Ex: 12,200.49
I tried usingval() but only get '12' because it stops when she sees a comma or a period.
I also tried using Replace() to remove the comma and period, but then my increase, because the last two digits are now a part of the number and either behind a decimal point.
Some examples of code
< cfset price = "12,200.49" >
< cfoutput >
#val (Price) #.
< cfset price = ' #Replace (Price, ",", "","ALL") # ">< BR / >
#val (Price) #.
< cfset price = "#Replace(Price,".","","ALL") #" >
< BR / >
#val (Price) #.< cfset price = #NumberFormat (Price, "_. _") # >
< BR / >
FINISHED WITH #Price #.< / cfoutput >
The output of the code above is as follows:
12
12200
1220049
FINISHED WITH 1220049.00So, you can see that 12,200.49 is now 1,220,049.00 because the two numbers when added.
What I would like to end by is a string '12,200.49' which is now a number like this $12 200,49
Help, please!
Hello
Try this
#DollarFormat (price) #.
-
BlackBerry smartphones how should I solve
I can't open the main folder or the sms folder.
the message says:
Eception exception DSSMA: State not valid (5): 803
How should I solve it
Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.
-
How can I correct eye wandering in Photoshop CS6
How can I correct eye wandering in Photoshop CS6
Copy the other eye and use it.
-
I use Photo Mechanic with Lightroom 4. I was asked to re - install Lightroom. I have a disc for LR3. How should I proceed?
Jaygorodetzer Photoshop Lightroom updates contains the full installer. I would recommend downloading the Photoshop Lightroom 4.4.1 updates.
-
I just installed the new free app cloud Creative Suite Master CS6 on my Mac (version 10.8.4) with Intel Core i7 3.4 GHz and 24 GB of memory. The cloud installation went well. However, the cloud has 8 updates all failled because of an error "errors encountered during installation. (U44M1P7) »
How can I correct this situation?
You can try the solutions in the following two knowledge base article:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html
http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-updates-Don ' t - install.html
-
How can I change my password for MSN Premium? Follow the online does not work.
I have followed cdarefully directions Microsoft online several times, for example, I typed my password (it should be correct - I am online with it) once, typed the new password twice and click on enter sometimes and continue a few times. The program provided my username, which I assume is OK - he looked good. Whenever after entering in enter or continue, I received an error message. He said password changed before she even briefly returned to an error message. Any idea what's going on? I'm not particularly com.puter read and write, but I can read and write. If there is no response being available online, does anyone have a phone number Ican use to call someone to talk me through what I thought, it was a simple task?
Hello
These should help:
The customer service
MSN billing
How to contact MSN customer service
http://support.Microsoft.com/kb/940784MSN - contact support
http://contacthelp.com/directory/Internet/Internet+service+providers/MSN?ListingID=126MSN support
https://support.MSN.com/default.aspx?WA=wsignin1.0&St=1&wfxredirect=1MSN Member Center
http://membercenter.MSN.com/signin.aspx?ru=%2fdefault.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
You guys should learn how to draw your windows properly on the screen. There is a company called Microsoft which makes my operating system, the guys maybe you should contact them and get advice.
I'm using the latest drivers from Microsoft. Can you ask them to fix the drivers? / s
-
I want to make repeated calls to the reader in the AcqVoltageSamples_IntClkAnalogRef code sample. A comment in the code says I can do simply by calling the reader. BeginReadMultiSample method of the callback function. I tried this without success using the same settings for the player. Is it possible for the callback function? If Yes, how should I call the reader? I'm programming in c#.
Thank you
John
Doug,
No problem. I found the class to which the timeout without much property in safely. I now have a solution to repeated calls. The two keys were the infinite time-out setting and the elimination of all the DAQmx objects in the finally section of the callback function before calling the AcquireData() method for the next cycle of reading and processing of data. The user sets blQuit to false and call AcquireData() by clicking on the Start button. Repeated calls are then made to 'automatically' until the user clicks the button exit.
Thanks for your help,
John
Private Sub AcquireData()
This code creates all the objects needed to acquire and store the data of a "sweep."
{
slaveTask = new Task(); Double sampleRate = Convert.ToDouble (this.cbxSampleRate.Text);
Double minVolts = Convert.ToDouble (this.cbxMinVolts.Text);
Double maxVolts = Convert.ToDouble (this.cbxMaxVolts.Text); int samplesPerChannel = Convert.ToInt32 (this.cbxSamplesPerChannel.Text); slaveTask.AIChannels.CreateVoltageChannel ("Dev1/ai0", "", (AITerminalConfiguration)(-1), minVolts, maxVolts, AIVoltageUnits.Volts);
Set up sync Specs
slaveTask.Timing.ConfigureSampleClock ("", sampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, samplesPerChannel);
Set up the reference trigger. US fires with a level of 1 volt and will record 2 samples of trigger before (the minimum)
slaveTask.Triggers.ReferenceTrigger.ConfigureAnalogEdgeTrigger ("APFI0", AnalogEdgeReferenceTriggerSlope.Rising, 1.0, 2);
slaveTask.Stream.Timeout = - 1;
slaveTask.WaitUntilDone ();
Check the task
slaveTask.Control (TaskAction.Verify); InitializeDataTable (slaveTask.AIChannels, ref dataTable);
acquisitionDataGrid.DataSource = dataTable;
Reader = new AnalogMultiChannelReader (slaveTask.Stream); drive. SynchronizeCallbacks = true; drive. BeginReadMultiSample (Convert.ToInt32 (cbxSamplesPerChannel.Text), New AsyncCallback (slaveCallBack), null);
}
catch (System.exception DaqException)
{
MessageBox.Show (exception. (Message);
slaveTask.Dispose ();
}
}
private void slaveCallBack (IAsyncResult ar)
{
Try
{
read data from the channel
data = reader. EndReadMultiSample (ar);
dataToDataTable (data, Ref dataTable);
plot the data here, if blKeep also write it to file
}
catch (System.exception DaqException)
{
MessageBox.Show (exception. (Message);
}
Finally
{
This. Refresh();
slaveTask.Dispose ();
If (! blQuit)
{
AcquireData();
}
}
}
Maybe you are looking for
-
problems with the registration of the identifiers and passwords
I use 64 bit Cyrco and he ceased to record passwords and new connections. I went Toareia settings and security but the box to allow it to work, can be clicked, it's dimmed. How can I activate this when the box so that it can't be checked
-
I just had my charging system (lost all data) and reloaded firefox. Before that I could paste the web addresses on a bar below the history pull down. Now, I can't do this and should continue to go to the history or bookmarks to go a place. Is it in a
-
Clarification needed Pavilion a1120n memory upgrade
First time on the Forum, need for clarification after reading others entry and to collect the necessary information on the PC in question. HP Media Center Edition Pavilion a1120n Processor: Pentium 4 519 (p) 3.06 ghz Motherboard: Asus LRTP - THE (3 g
-
I play games on freerides.com and have for some time. Lately I've been having trouble with games freezing so I uninstalled and reinstalled it player. but now when I try to open a different file on my computer they all open in windows media center. I
-
I preformed a system recovery, a few days ago and after that he did all the updates for the computer the computer restarted as it was supposed to, but the message 'we could not finish the updates by undoing the changes' come and now my computer 9 stu