Access programs

Similar Questions

• AVG wants to leave an internet access program, netfw Module.

  Original title: what is netfw Module?

  AVG is asking if I want to leave an internet access program. Under more information, it just says that the program is netfw Module and I have no idea what it is.

  Hello

  What operating system is installed on the computer?

  Can be found in the location C:\Program Files\Common Files.netfw.exe Netfw module.  This can sometimes be changed maliciously by virus and represents a potential security risk.

  I suggest you to run an online of Microsoft Safety Scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.asp

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• Windows vista access programs requiring passwordcomputer admin freezes and access failed to connect to the admin profile.

  I am running Windows vista and im a user not an admin when I try to access programs that require the admin password I get it but all that happens is my freeses computer and when I try to access the admin profile I correctly enter the passworcd and it gives me a connection failure. What is the problem and how to fix it?

  Hello
   
  1. If it works much earlier?
  2. is the specific question to a few new programs?
   
  Your account was damaged, I would have you difficulty the damaged user profile to solve the problem.

• the administrator cannot access programs, but guest user can

  When I am logged in as an admin user can't access programs, it happens that the program does not exist. When I try to go on internet with Explorer he asks me what program I want to use to access the internet. If I change my user and just go as a guest he let me go on the internet with no problems and have access to all the programs on the desktop. also, when I am logged on as administrator a lot icons in the toolbar have disappeared. It's as if the admin is blocked for doing things, but a guest user can.
  Thank you

  Hello

  The computer seems to work fine in safe mode. The diagnostic mode disables all third party software and services that run in the background. To emulate a similar situation in normal mode, you can run clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Concerning
  Anthony.

• My computer won't let me log on to my account directors and cant access programs that need administrator permission

  Log cant administrator account and it is not removed is where I was logged in and then shut down my computer and then I could not connect more please help

  When I try to log the log service failed and I already tried safe mode and I can get on the account but my computer won't let me access programs and areas requiring permission for administrators

  Hello

  When you log in Mode safe mode, it accepts the password for your administrator account? In Safe Mode, open Control Panel and select user accounts. It shows on your account administrator?

  If so, while in Safe Mode, select Start Programs/Accessories/tools system. Click on System Restore .

  1. click on the Next button. Place a check mark to show more restore Points.

  2. Select a restore point with a date and time before when you saw for the first time this question.

  3. press the Next button. Click the Finish button.

  Start System Restore and restart the computer. Make sure that it ends completely before doing anything.

  NOTE: Using Safe Mode system restore is permanent. You will not be able to cancel the system restore process.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  I have an Adobe Creative account and my payments come out every month; However, I am unable to connect with my new account or access programs I have installed; It only let's login me under my old account. Can someone help me solve this problem?

  Hello

  I see that you have an adobe account with the same email with forums, however, I don't see no subscription under this account.

  If you can't change the email during indexing, see the steps below:

  The OOBE and rename it OOBE.old and then try to connect with the correct ID:

  Location: -.

  Windows C: \ directory users\ user account-App data-local-adobe \oobe

  MAC: Go / go to the folder / Application support / Adobe / oobe

  If nothing helps, please contact adobe support:

  Contact the customer service

• Still waiting for approval of the access program SDK InDesign family

  Hello

  I asked the access program SDK InDesign family approval weeks ago and still have not heard anything.

  I need the CC2014 SDK and it becomes more urgent... How do you run after that? There is a post that mentions a guy of messaging on Twitter - is there a more formal way?

  Thank you

  Liz

  I wrote an e-mail to Roger Risdal [email protected]>.

• How can I block internet access program?

  I have a program I don't want to have access to the internet. How to let firefox block?

  Firefox has nothing to do with it. Your firewall , it's what to implement.

  Configure the firewall so that Firefox can access the Internet. {web link}

  Open the settings of your firewall and for this program, block it.

• Windows 7 32 bit computer laptop sony - unable to access programs and files

  Before I had this problem. I myself remember having seen a balloon saying updates were installed and I had to reboot my computer. what I did. I can still access my desktop, but once I click on any program even the Start button it freezes. The mouse pointer still moves, but has the symbol circular treatment moving. The only way I can get out is to restart manually. Ctrl + alt + delete does not work. I tried to login in safe mode. Start button does not work but I was able to access some files on the desktop, but somehow something closed the file shortly after and brings back me to the desktop. at a point on the ordinary boot, a blue screen came up with the error message, but because he went too fast and restarted, it says something about error 0x000000F4. I don't know if it is a virus problem a hardware problem or windows is possibly corrupt. Pls. share your ideas about this.
  BTW im using another laptop now.

  marphilyu,
  For me, it sounds as if you can see the effects of a virus\malware infection.  Take a look at these articles and see if they are able to help.

  Get rid of malware

  Can I clean an already infected computer?

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Networking - how to make an access program to the closure of the internet itself?

  I have several programs that seem to be access to the network all the time.  These programs have nothing to do with the internet except for possibly updated or another service.

  Is it possible to redirect the address that these programs continue to go to, to a loopback address that does not access internet?  (for example, 127.0.0.1)?

  For example, power guard verification Bureau ' 72.25.195.217.in - addr.arpa "every minute or two, and network traffic stops whenever he does.

  1 consider uninstalling these applications.

  2. look in options/preferences of these applications and records their Guides the user and/or messages to determine if there is a way to configure the behavior you don't like.

  3 ask the authors of the aid applications.  For example, if you mean by "Power Desk" PowerDesk Pro by Avanquest Software, free support is here--> http://www.softcity.com/support/software?softwareId=power-desk

  4 buy a 3rd party firewall that controls the outgoing Internet traffic.  In general, it is not necessary to have a such montor, but in your case, it might help prevent applications "phone home".

  5. do a little research on the hosts file.  This is as good a place to start as any--> http://www.bleepingcomputer.com/tutorials/hosts-files-explained/ unfortunately, your Hosts file will not help if the IP 'home' is hard-coded in the software (as seems to be in your example).

  6. If you have XP Pro, read this thread--> http://www.ntcompatible.com/How_to_block_IP_address_NOT_URL_or_UNC_name_t23927.html (particularly after #118510) (to start IPSEC in XP Pro--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ipsec_start_snap-in.mspx

• Popup box Windows Installer whenever trying to access programs

  Every time on go on the computer, even for access to internet or other programs from the windows box install and status box appear, he has never done this before, the only way I can stop it is go to the Task Manager and cancel it. What can I do to prevent this

  Hi, Edward ABauman,.
   
  -What, exactly, is a transcript of the pop-up error message?
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the article below and check if it helps fix the problem:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• "Narrator program listed under" Accessories - accessibility programs

  By mistake I enabled the program Narrator, now I am unable to eliminiate of my startup programs when the PC starts.  I can only physically close the program each time by clicking it and get out.

  Hello

  Click on start - go to the ease of Panel - easy access - the access control centre - explore all settings - use the computer without a display - uncheck the box by tour Narrator - click Save.

  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html

  and while turning the power switch Narrator to read the tutorial above.

• Icons changed to the icons of the House, unable to access programs

  icons changed to adobe

  all my icons are now the adobe icon and I can't access all the programs.  How, for example, the program excel again hitting the excel icon?

  Hello

  Download and run the Fixit of the article below diagnostic tool and check if this solves the problem.

  
  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Can't access "Programs and features" Control Panel

  When I click on programs and features in control panel nothing happens. Other icons work

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also, try the following:

  Press Windows key + R

  Type: appwiz.cpl

  Press enter

  See if it opens

  Also, try to create another user account and see if it opens.

  Its possible you may have malware on your computer that prevents you from opening.

  Can you do a restore of the system before you start, facing this problem?

  Download ESET Removal tool

  Burn it to a CD or create a USB bootable thumb with her:

  http://www.eset.com/us/download/utilities/

  ESET are Live is a live Linux distribution which can scan malware and clean infected files. It runs from a CD/DVD or a USB device, regardless of the host operating system, but has a direct access to the system disks and files. This will eliminate the threats which, under normal conditions, can be impossible to remove.

  Download and create your ESET are Live drive

  You can also try to do a system restore before you start experiencing this problem:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-Windows-7.htm

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files