How simulate correctly a VM with public IP address

Similar Questions

• U - Turn anyconnect with public IP addresses

  Hi all

  I want to configure on an ASA5505 anyconnect but I can't achieve anything when I am connected.

  The customer must receive a public IP address and all traffic must pass through the VPN tunnel.

  The ASA has only one connected interface (outside) and a public IP address.

  Public IP for the VPN subnet is routed to the ASA.

  I don't have any "network" and I don't have a.

  VPN clients must be able to Exchange traffic between them.

  My network configuration:

  -ASA outside IP: x.y.z.19

  -IP address range allocated to VPNS: x.y.z.48 to x.y.z.63

  -There is a firewall that allow the IP VPN to one beach and rule range of VPN IP on the "global" interface

  If I establish a VPN connection, receive an IP address, for example x.y.z.50

  Traceroute from external location to x.y.z.50 for example shows x.y.z.19 as the last hop, if routing is working properly.

  On the VPN client, I cannot ping or achieve anything on x.y.z.19 or 8.8.8.8

  Plotter in x.y.z.50 to 8.8.8.8 ASDM package shows that the package can pass.

  What Miss me? Do I need to use NAT, even if I do not have inside the network?

  Thanks for your help!

  Hello

  Yes. You select allowed same traffic safety intra-interface that come you and go through the same interface... you need to do no. - nat with (outdoors, outdoor) with your vpn address...

  Concerning

  Knockaert

• Outlook does not, Exchange is a virtual machine on my iMac with public IP address

  My iMac is connected to my switch and my switch is connected to my NVG589 of ATT modem.  My iMac draws a DHCP ATT modem and the intellectual property IP is 192.168.1.64.

  I am running VM Fusion on the Mac, version 7.1.3 (3204469) and I've updated for yesterday.

  One of the virtual machines on my iMac is Exchange 2013 and it has a public IP address.

  So, to summarize, my iMac is DHCP with a private class C address and my VM is static in a class A public address.

  Before the update I could open my outlook on my iMac and it connected to my server exchange very well.

  After the update, my vision and my iMac OWA do not work.  My outlook to connect, but it won't draw down of any mail and my own just can't OWA load.

  Exchange and OWA work from any another machine other than the iMac.

  I can't help thinking that it's something in the update that has done this because it worked before the update 7.1.3 (3204469).

  The NIC is auto detection against NAT or bridged and I haven't changed it.

  Can anyone suggest something that I have not tried?

  Thank you

  Cliff

  This has just started tonight.  very strange

• How to get the phone's public IP address?

  I need to recover the public phone IP address, how do I do this?

  Did search you the Forums before posting?

  https://supportforums.BlackBerry.com/T5/native-development/get-IP-address-of-WiFi/m-p/2460215#M26157

  https://supportforums.BlackBerry.com/T5/native-development/how-to-get-WiFi-IP-address-in-BlackBerry-...

  https://supportforums.BlackBerry.com/T5/native-development/getting-the-IP-address-of-the-device/m-p/...

  http://doc.Qt.IO/Qt-4.8/qnetworkinterface.html

• I need help, how to configure virtual machines with PowerCLI IP addresses

  Hi all

  I open this topic because I really need your help.

  I wrote a script that can automatically create 10 VMs on my ESX Server.

  I run the script with PowerCLI.

  I want now to help script, give the ip on the 10 machines created settings.

  I don't know how, can you enlighten me on this subject?

  Is there a script that can do this?

  Thank you very much.

  Isn't the "0.2 | ForEach-Object {"a loop for? IMHO, it is a loop in the PowerShell way.

• EX90 two autonomous with the public IP address can make video calls among them self on the Internet or not?

  Dear expert;

  I am very new to VCS and TP Cisco.

  We implement now presence Cisco TV with VCS - C, VCS-E TMS, TCS, MCUS and endpoints with Jabber in a single edit.

  and in another configuration CUCM 10.5, UCCX 10.5 IM & P, Jabber with some 10 officers.

  Now the question is in our building on the 2nd floor we have an EX90 and on the 5th floor an EX90 and on local network, we can make video calls using the IP address.

  In the same way is it possible to make a video call between 2 devices EX90 (both have public IP) present in a location different in the same city on the Internet without the participation of VCS - C and VCS-E.

  It's the client request :)

  Concerning

  Paiva

  Yes, but leaving these systems outside in nature with public IP addresses, leaving you are vulnerable to a number of questions. See for example http://www.videonationsltd.co.uk/2014/11/h-323-cisco-spam-calls/

  https://supportforums.Cisco.com/discussion/12336591/sourceh323idcisco-incomingcalls

  https://supportforums.Cisco.com/discussion/12340591/nuisance-h323-calls-SX20

  The offers above with H.323 calls, in addition to this, you will encounter similar problems using SIP where the systems will be analyzed by tools such as SIPVicious

  /Jens

  Please note the answers and mark questions as "answered" as appropriate

• Public IP address for OEM > 11.2.0.4

  Hi all

  I installed Oracle DB 11.2.0.4 on the AWS EC2 instance.

  I can stop / start the dbconsole so.

  [oracle@ip-10-0-0-4 ~] $ cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  10.0.0.4 ip-10-0-0 - 4.ec2.internal

  
  

  [oracle@ip-10-0-0-4 ~] $ emctl start dbconsole

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.4.0

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  https://IP-10-0-0-4.EC2.internal:1158 / console/em/aboutApplication

  Oracle Enterprise Manager 11 g Database Control from... began.

  ------------------------------------------------------------------

  Logs are generated in the /u01/app/oracle/product/11.2.0.4/db_1/ip-10-0-0-4.ec2.internal_orcl/sysman/log directory

  Note that the instance uses private ip on the local server, where we access the url supplied OEM. But you need to access it via the public IP address.

  But when I tried to access it by using the public ip I got this error:

  

  Please help how to access the OEM using public IP address.

  Thank you

  MK

  What is the maximum number of different issues that you combine in a single thread?

• Flex publish / subscribe does not public IP address

  I installed the last Flex Express LCD on top of ColdFusion 8 enterprise demo installed as JRUN/multiserver and got it all to work when you run directly from the server using the "' http://127.0.0.1:8300 / samples". " However, when I run outside with public IP address of the server, then everything works except for samples of publsh/membership push. They just hang and impossible to subscribe. Any ideas? What is a restriction on the LSCDS Express or the CF8 demo version? Or maybe a port problem? We have all ports closed except for those needed. There is an additional port that is to be opened in addition to 8300? Thanks for any help.

  I think I found the problem. It seems you must have port 2037 open for RTMP to work e-mail with sample apps. This port is closed on our firewall and I suspect that's why I'm having a problem. I'll get my network guy to make the change on Monday and then I'll try it again. Probably that it will solve.

• How to change the Rectangles with buttons

  I'm working on this example that does not work correctly:

  public class test extends Application
  {
  
      private void init(Stage primaryStage)
      {
  
          Group root = new Group();
          primaryStage.setScene(new Scene(root));
  
          String pillButtonCss = DX57DC.class.getResource("PillButton.css").toExternalForm();
  
          // create 3 toggle buttons and a toogle group for them
          ToggleButton tb1 = new ToggleButton("Left Button");
          tb1.setId("pill-left");
          ToggleButton tb2 = new ToggleButton("Center Button");
          tb2.setId("pill-center");
          ToggleButton tb3 = new ToggleButton("Right Button");
          tb3.setId("pill-right");
  
          final ToggleGroup group = new ToggleGroup();
          tb1.setToggleGroup(group);
          tb2.setToggleGroup(group);
          tb3.setToggleGroup(group);
          // select the first button to start with
          group.selectToggle(tb1);
  
          //////////////////////////////////////////
  
          final VBox vbox = new VBox();
  
          final Rectangle rect1 = new Rectangle(300, 300);
          rect1.setFill(Color.ALICEBLUE);
          final Rectangle rect2 = new Rectangle(300, 300);
          rect2.setFill(Color.AQUA);
          final Rectangle rect3 = new Rectangle(300, 300);
          rect3.setFill(Color.AZURE);
  
          tb1.setUserData(rect1);
          tb2.setUserData(rect2);
          tb3.setUserData(rect3);
  
          group.selectedToggleProperty().addListener(new ChangeListener<Toggle>()
          {
              @Override
              public void changed(ObservableValue<? extends Toggle> ov, Toggle toggle, Toggle new_toggle)
              {
                  if (new_toggle == null)
                  {
                      //rect.setFill(Color.WHITE);
                  }
                  else
                  {
                      vbox.getChildren().addAll((Node[]) group.getSelectedToggle().getUserData());
                      //rect.setFill((Color) group.getSelectedToggle().getUserData());
                  }
              }
          });
  
  
          ///////////////////////////////////////////
  
  
          HBox hBox = new HBox();
          hBox.getChildren().addAll(tb1, tb2, tb3);
          hBox.setPadding(new Insets(20, 20, 260, 20));
          hBox.getStylesheets().add(pillButtonCss);
  
  
  
          vbox.getChildren().add(hBox);
          //vbox.getChildren().add(rect);
  
          root.getChildren().add(vbox);
      }
  
      @Override
      public void start(Stage primaryStage) throws Exception
      {
          init(primaryStage);
          primaryStage.show();
      }
  
      public static void main(String[] args)
      {
          launch(args);
      }
  }
  
  
  

  I want to create several Rectangles (or in which object or object) in which I want to store data. I want to spend the Rectangles (objects) that appear in front of the user by using the buttons. The example that I put in place does not work correctly. Can you tell me what is the right way to implement this?

  REF javafx 2 - How to change the Rectangles with buttons - stack overflow

  You have two problems:

  User data that assign you to each button switches are a node, not a [Node]. Thus, the cast will fail on line 43.

  When the selected toggle changes, you add another Rectangle to the vbox. You want to replace the rectangle that is in the vbox.

  Try

  vbox.getChildren () .setAll ((Node) group.getSelectedToggle () .getUserData ());

• Access to the COR to two XP systems behind a router with a single public IP address

  Hello

  is it possible to access the RDC to two XP systems, with two different port for the DRC, behind a router with a single public IP address?

  Please note this ia a small home network without any parameters of the field. I use IP to access DRC.

  You comments are appreciated.

  Thank you

  Use different ports for the DRC on both XP and configure the router to redirect to the appropriate port on the appropriate computer.

  See the article in the Microsoft Knowledge Base How to change the listening port for remote desktop .

• Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

  Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC

  Hi, Grizzly7659,

  Follow the instructions given by Taurian & guenoun

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/a2df7d06-BE9B-4554-b796-c52fac838842

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/51c5b0d3-BFDD-4f69-bff7-623954866b59

• CoreFoundation.ddl was not found. Why is there no place on Microsoft sites that specifically tells a user how to correct this registry.

  Why a windows user has to pay a third party to correct this problem?  Responses to this problem should be easily and readily found so that people who have purchased products with Microsoft operating systems can easily solve the problems themselves.  Where is the answer I need on how to correct this error without having to pay someone.  It seems to me, you have already paid the system once, you shouldn't have to pay a second time to solve a problem with her.  It's very frustrating trying to find the help you need without turning around and around the company who wants to take your money to fix.  Microsoft needs to tell me how to solve this problem.   PLEASE, I BEG YOU.

  First of all, it was an honest typo, I was not looking for the wrong thing.  I have big problems getting Quick Time to work on my computer.  I have re - down loaded, download Itunes, downloaded the package combined download of two of them.  Nothing will work.  Here is a list of all the error messages I received in the last two days:

  Quick Time #0 error, please make sure that QuickTime is properly installed on this computer
  The plug is not properly initialzie
  I tunes of assistance was not installed correctly.  Please reinstall Itunes Helper.  Error 7
  Errors occurred during the installation of the updates.  If the problem persists, choose Tools, only download and try to install it manually.
  And finally...
  Application has failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.

  So, I register QuickTime, iTunes and Windows problems.  So where can I find a way to correct my mistake of registry which cost no money and has download their parties _ who pay you and it still does not work.

  I don't know if it will work, but it has helped other people who have problems with installation of these products.  Save the download to your desktop.  Right click on the Setup icon, and then click Run as administrator.  I know that you are probably already connected as long as administrator but believe it is sometimes the case for some reason that I don't understand.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  There may be a problem with another Apple program interfere with installation of itunes (specifically the itunes help). http://discussions.apple.com/thread.jspa?threadID=2256415.  Here's the gist of it:

  Uninstall the Application Support from Apple, iTunes and Quicktimes (if these, two are displayed as installed).

  (From this moment until reinstall us Application Support, Apple, QuickTime nor Safari 4.0.4 will able to run.)

  Then, we'll remove all the leftover program files and folders.

  (1) open the "disk" Local (c) or according to drive it your program files are stored on.
  (2) open the "Program files".
  (3) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (4) return to 'disc' Local (c) or according to drive it your program files are stored on.
  (5) open the folder "Program Files (x 86)".
  (6) with the right button on the iTunes folder (if it still exists), then select 'delete '.
  (7) staying in "Program Files (x 86)", open the "Common files" folder.
  (8) open the folder "Apple."
  (9) with the right button on the Apple's Application Support folder (if it still exists), then select 'delete '.

  Now, empty your Recycle Bin and reboot the PC.

  Reinstall Phase

  After restarting the PC, do not open other applications. Disconnect from your network or the internet. Turn off all your security (firewall, antivirus and anti-spyware) software.

  Now start the installation in a right-click on the iTunesSetup.exe file and you downloaded earlier and then clicking Run as administrator.

  Re-enable all security software before you reconnect to your network or the internet.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the iTunes is not install properly and to do please ensure that QuickTime is installed correctly on this computer errors, try to repair your .NET Framework 3.5 SP! application by going to start / Control Panel / programs and features / .NET Framework 3.5 SP! Click on the program and click on repair or uninstall.  When you are prompted, click Repair and let it run.  You won't have to restart.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The FPR application failed to start because CFNetowrk.dll was not found.  Reinstalling the application may fix.  Make sure you have all updetes installed Windows - and I mean all of them (except for device drivers).  Do a manual check and install whatever it is, it comes with and then do another manual check and do the same thing and this follow up until no new update is presented and confirms that you are using the SP2 for Vista (Start / computer / system properties and it should say SP2).  Otherwise, manually install SP2 and rerun through the exercise of updates (or check it out before you start making updates).

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  For the plug-in has not initialized properly, make sure that you use version 7.4.1.14 QuickTimes or most recent - there is a known issue with older versions of work with Vista, but they claim to have the answers with this version.  If you've tried for awhile, you will have an older version.  I download and save on the latest desktop and make sure it is as stated above.  I also re - download and save on the desktop iTunes very it in case theres a similar problem there.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  To install updates, choose Tools, only download and try to install it manually (it's what they recommend as the fix for the problem of updates, so we should take the word for it).

  Once you've done all the preparatory steps before the downloads, repair. NEt Framework 3.5, uninstall programs, you must uninstall (if you can, or as much as you can according to the instructions) and then reboot the machine to make sure that you leave cool.  After the downloads, but before the installation, turn off all your security software and antivirus software in the case where there is a conflict of something.  Make sure that no other programs are open.  Then follow the steps in the update, then the measures re - install.  Then restart.

  I hope that the two products work now.  I don't think we need to do something for your registry database - weather (it's all these other programs that are the problem).

  If this does not help, then please repost this question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads as well as a link to this topic (so they'll know what's already been tried).  They are the real experts on audio problems and will be more than happy to help you - or you can try the Quicktimes/iTunes Forum where they know the products better.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Site to Site VPN between ISR4331(Data Center) and 25 branches with RV042 and dynamic public IP address

  Hi, we just got router ISR4331. We will use this router to our datacenter as pummel hub. Not to mention that it will be the static IP address. Our goal is to connect 30 small offices to the Datacenter by VPN site-to-site. All of our offices a RV042 router and DSL connection, so dynamic public IP. How to accomplish this task. Before the VPN connection is stable and the need not to configure tunnels frequently.

  Thank you

  GM

  Hello

  Please check the config below:

  HUBS:

  crypto ISAKMP policy 1
  

   BA 3des
  md5 hash
  preshared authentication
  Group 2
  life 86400
  crypto isakmp secretkey key address 0.0.0.0 0.0.0.0 (Having said that the dynamic router HUB remote routers have public ip address)
  Describe your valuable traffic. Note that I have sepcified for both tunnels, but basically, it will be the same for the rest out for the destination. For example, I used 192.168.1.0/24 and 192.168.2.0/24. You will need to replace it with your existing installation.
  TUN1 extended IP access list
  ip permit 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
  TUN2 extended IP access list
  ip permit 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255
  Create your strategy to Phase 2
  Crypto ipsec transform-set esp-3des esp-md5-hmac TS
  card crypto S2STUN 1-isakmp dynamic ipsec HUB_TUN
  crypto dynamic-map HUB_TUN 10
  

  86400 seconds, life of security association set

  game of transformation-TS

  match address TUN1

  !

  crypto dynamic-map HUB_TUN 11

  86400 seconds, life of security association set

  game of transformation-TS

  match address TUN2
  Now apply the card encryption to your WAN interface
  gi0/1 interface
  card crypto S2STUN
  Now configure on your remote routers
  Remote router 1
  crypto ISAKMP policy 1
  BA 3des

  md5 hash

  preshared authentication

  Group 2

  life 86400

  !

  ISAKMP crypto secretkey key address x.x.x.x (replace with your public ip address of the HUB)

  !

  TUNNEL TRAFFIC extended IP access list

  permit ip 192.168.2.0 0.0.0.255 192.168.1.0 0.0.0.255

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac TS

  !

  crypto card TUN_TO_HUB 10 ipsec-isakmp

  defined peer x.x.x.x (replace with your public ip address of the hub)

  game of transformation-TS

  match address TRAFFIC TUNNEL
  !

  gi0/1 interface

  card crypto TUN_TO_HUB

  Remote router 2

  crypto ISAKMP policy 1
  
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  life 86400
  !
  ISAKMP crypto secretkey key address x.x.x.x (replace with your public ip address of the HUB)
  !
  TUNNEL TRAFFIC extended IP access list
  ip licensing 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac TS
  !
  crypto card TUN_TO_HUB 10 ipsec-isakmp
  defined peer x.x.x.x (replace with your public ip address of the hub)
  game of transformation-TS
  match address TRAFFIC TUNNEL
  !
  gi0/1 interface
  card crypto TUN_TO_HUB
  HTH.
  Evaluate the useful ticket.
  Kind regards
  Terence

• How to draw an image with reflection effect?

  Hi!, someone know how to draw an image with reflex effect?. I develop in JDE 4.7 with the simulator of the storm. I want to put a picture below a reflex effect as Apple Inc. and normal. My request is a CLDC and I use a MainScrren class, this is an example of what I want to draw:

  

  Angel

  Hello

  I found the code on the net, it works very well on j2me that even can be used also in blackberry below.

  public static Image createShadow(Image image) {
  
          int newX = image.getWidth();
          int newY = image.getHeight()/2;
           int out[] = new int[newX*newY];
           int row[] = new int[newX];
  
          for (int iy = 0; iy < newY; iy++)
          {
            image.getRGB(row,0,newX,0,iy+newY,newX,1);
            for (int i = 0; i < row.length; i++) {
                out[((newY-1)*newX-iy*newX)+i] = row[i] & ( (127*iy/newY)<< 24 | 0xffffff);
            }
          }
  
          return Image.createRGBImage(out,newX,newY,true);
      }
  

  Hope this will solve you problem.

  Please let me know if it solves your problem or not.

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.