Dispositivoscarlett 2 i 4 focusrite

Similar Questions

• Strength of Focusrite Scarlett restarts my iMac

  I just updated my mid-2011 27 ' iMac OS Sierra and every time I try to lsinch all focusrite scarlett associated app like amplitube logical or 4 X my power Mac restarts while giving me an error message.» Even when I open the sound settings, I get the same result. Needless to say, everything was working fine on El Capitan, which I restored my iMac from a backup before the upgrade. I tried SMC and the PRAM reset but the problem is there. I have updated the firmware on my sound card but no luck either. Any suggestions... ? On the focusrite website, there is no mention about something similar and OS Sierra is listed as compatible with my 2i4 Scarlett.

  You must talk to the developers of the application to report the problem.

• Focusrite with iMAc

  Hi, I would like to connect focusrite saffire pro40 to iMac. Saffire ends with firewire 400. I can only find firewire800 adapter Thunderbolt. What is the solution please? see you soon

  Hello

  You need a Firewire 400 to 800 cable port and an adapter firewire-crush. I got my 26 Safire hung this way and it works perfectly.

• After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  Did you try a reset of the SCM and hope that the problem is solved?

  • Reset the management system (SCM) controller on your Mac - Apple Support

  What does the computer when started in safe mode?

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You have a copy of backup clone of the previous OS X and its applications?

  This is usually a preventive measure to be still able to use the Mac

  an upgrade path does not work as expected, so you have alternative.

  Or you can return to the configuration already in place, in offline mode.

  In any case...

  Good luck & happy computing!

• I just started using Garage Band with 2i2 Focusrite Studio material. When I record my voice through microphone, I hear a mono. Is it possible to share sound to the 'left' and 'right' channels, i.e. to imitate a stereo mic?

  I m using MacBook Pro with Maverick OS X version 10.9.5 and Garage Band 11´ v. 6.0.5 with hardware 2i2 Focusrite Scarlett Studio

  kopi42 wrote:

  Is it possible to share sound to the channels of the 'left' and 'right '.

  Yes:

  http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly

  (Let the page load COMPLETELY. The link to your answer is at the top of your screen)

• Basic and stupid, but frustrating: how to set top/receive the sound of Focusrite Scarlett 2i2 in logic?

  Sorry to ask, I feel super stupid especially because I just took a record class this semester, but it's still where I got stuck for awhile it too: I so Scarlett 2i2 all set up and plugged into the port USB drive on my MacPro, with cables (1) (2) an electric guitar and a microphone , and light and everything seems to be connected correctly, but I can never understand what to do once I open the "empty project" in Logic Pro X, i.e. the Audio input > then what? I tried a number of combinations (entry 1, entry 2, entry 1 + 2) with two tracks and at times different logic seems to capture sound from either the microphone or guitar, but never both at the same time, and when I try to register, I get nothing. I know the 2i2 back sound, but I don't know how to get it in logic too - I am missing as a headphone set big enough to fit into 2i2 currently taking, then maybe this is part of the problem? Perhaps? I have no idea. Advice or simple suggestions are appreciated!

  In the logic->-> audio Preferences that you have set up your input device to be the Scarlet?

  Next, create two strips of channels (Audio)

  Press x to open mixer and set strips in mono channel by clicking on the two circles - a circle is mono.

  and on the entrance to the channel bandwidth select input 1 and input 2 for the other...

• Focusrite scarlett 2i4 unable to use as audio input/output device

  I just bought a Scarlett 2i4 hoping that time would have been solved compatibility problems. However, I'm unable to use it as an input/output device. Site Web Focus rite has a class compatible mode download that is supposed to solve this problem. And I installed it three times without success. Has anyone else had this problem and found a workaround. Thank you! I have a macbook pro mid 2012, el capitan 10.11.3.

  Don't know if this will help.

  I have a 2i2. When I got it, a few BONES in there, I couldn't make it work. I went back and forth with tech support Scarlett. They really tried, even sent several beta drivers. Nothing works.

  Then I uninstalled all the software of Scarlett and restarted - and it works.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• Download Open Transport for 10.11.6 BONES

  Excuse me I am new to HD recording.

  I want to follow my synth Roland RS-9 on my MBP.

  I hung my SR-9 on an Interface Focusrite Saffire 6 USB audio with two midi cables.

  The Saffire 6 is connected to my MBP with a USB cable.

  I am currently not able to monitor the Roland through my Mac.

  I have Logic Pro X, Soundtrack Pro and Ableton Live Lite 8 installed on my Mac.

  I need to download Open Transport to make a difference here?

  When you say monitor, do you mean watch the audio output of the RS-9, or use it as a midi controller? If you want to record the audio output of the synth, you must connect the cable from the audio out on the Sapphire, set up an audio input in Logoc track and make sure that input control is enabled. From your description, it seems you have the synth configured as a controller keyb rather than as a tool.

  I'm more than a guitarist, but that's how you get an acoustic guitar in logic as an audio signal.

  hope that helps!

• Aftertouch message get lost?

  I have a Yamaha Motif Rack ES of Nektar Panorama P6 and iLok connected via a hub ("HooToo") USB3 generic port USB3 on my MBP.  The Mac USB2 port is connected to the Focusrite Scarlett 18i20, and another keyboard (old Korg N1) is connected to the midi in port of the Focusrite.

  I have several patches where I play the Motif Rack ES with the nectar, with Aftertouch keyboard mapped to the Modulation of the motive... setting to bring in the vibrato with aftertouch. Many times it seems that aftertouch messages get lost... Modulation will come as planned when I press harder the nectar, but often doesn't come back down again... Vibrato stays on until I have pressure and then release again. My vibe all the loot.

  Did someone else had a problem like that and maybe found a solution or workaround? I suspect that the USB hub can be a bottleneck, but I don't see any way around that.  Maybe it's the ground itself? I didn't notice messages are lost during playback of the soft synths, but I'm not sure about this.

  Try to connect the Motif Rack ES MIDI to the Focusrite.  If it solves the problem, using a USB cable on the ground by midday. It seems that I remember reading about the problems of USB communication with that of patterns and MO6s time on the Yamaha forum. USB hub is powered? Try another USB cable and a powered hub.

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• logic pro loop bug? ! Help

  

  

  Hi guys, then all of a sudden I started to come out of this not the case with logic problem...

  I use the latest version of 10.2.4 - on El Capitan 10.11.2 logic. (I've not updated El Capitan waiting on the heads up of OR)

  Say I do a bar 8 loop in loop Maschine, when I export loop or everything sounds, they will be fine logic (of course in the same BPM), but when I chop to make 8 bars, I who will then drag in order to get to say a 16 bar. The problem is the loops cut themselves a couple mm BEFORE or after (as in the photo) to the place where he would actually loop which means that the sounds are not completely in time as it should. I've never had this problem before and his frustration so I tried to cut to get them in time but it won't let me that either don't know what's happening!

  last week I started using a Focusrite 2i2 id say the problem began therefore to leave, but I can't understand what is the problem! I have a feeling it's something so simple, which is why its so annoying!

  the pictures make it better understand what I mean!

  Would appreciate any help!

  Thank you

  If you open the event float how long do you think that for regions?

• How to midi playback?

  I have connected my Korg Triton to my (Focusrite Scarlett 2i4) Audio interface with a midi cable. When I create a midi track, I am able to hear the sound, I chose on my keyboard and can also hear when I record but when I try to play back I get nothing even if when I record I see a region being developed with midi inside notes. When I try to reproduce this region I hear anything. Not even movement in the midi track Channel Strip. Does anyone have suggestions how I can read my midi recording?

  Here are the settings I chose when creating the external midi track

  

  In the image below you can see the region that was created when I recorded. You can also see the channel strip settings

  

  You who have followed together at the exit of the MIDI from your keyboard?  You should have a MIDI IN and MIDI OUT cable, two cables of connection of the keyboard.  Or are you using a single MIDI cable?  You hear the real keyboard of his own sound source when recording.  Playback must be send these notes réécrirait the keyboard, so it can generate its own.  So why the notice signals aren't hitting the keyboard?  You see a Port assigned for notes to get out?  You see the orange reading light when the playhead reaches notes during playback?

  

• Has anyone found a fix for Airport Express music jump Apple?

  I searched for weeks for a solution to my intermittent gaps in music, aka jump. It's so frustrating. I really don't want to have to go to a wired solution. It will take too long and a cable unattractive in my rooms.

  I use the Bright House Networks 5 ghz Arris DG1670 router/modem that my provider rents for me.

  The router is less than 30 feet of my Airport express

  The airport express is on the ground, hooked by fiber TosLink Cable to my Focusrite Safire Pro 24.

  • Thinking that this could be a problem I have since turned sideways to try it as a cure for that surface in contact with the ground is less. The next step, I'll try is put on something instead of on the floor. But given the proximity is is not much of a problem anyway.

  I tried:

  • change the channel on my router from 11 to 40 to 47 to the automobile. They all jump.
  • I tried the 5 ghz and 2.4 ghz for connections.
  • Streaming of my Macbook Pro, streaming from my iPad 2 Air
  • Change the setting of joint A/N to N only (since the Express a N)
  • Activation and deactivation of WMM in the router configuration.
  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.
  • Change the interval of tag to 500 ms 100. (This allows supposedly with the flow and the battery life).

  All jumps. But after change the channel to a 44 superior to WMM and putting the Express with nothing around him to block the antenna inside, he seems to ignore a little less. It is likely that there are too many networks in my home nearby that are fighting in the spectra of bandwidth, but I hope someone may be able to offer something else.

  I suggest anyone with the same problems to try some of the "fixes" I tried above reading.

  Thank you.

  It may just be possible that you have a bad AirPort Express...

  I'm assuming that you have a 2nd generation 802.11n AirPort Express AND that you have configured to join the wireless network provided by your gateway Arris... correct?

  The router is less than 30 feet of my Airport express

  As you probably already know the AirPlay flow is from your MacBook Pro or iPad 2 Air to the Arris first, then, the Express. In theory, you should get the best streaming when all these devices are co-located. As you can imagine, if you take a camera from another room or floor, the stream will pass through a number of walls, floors, ceilings, etc., which will affect the overall available bandwidth.

  • Change the setting of joint A/N to N only (since the Express a N)

  Not quite correct. The Express supports modes radio 802.11a/b/g/n. 802. 11A only works on band 5 GHz. 802. 11 b or g only works on the 2.4 GHz band, and 802.11n can operate on either.

  • Activation and deactivation of WMM in the router configuration.

  AirPort base stations do not QoS support for this parameter shouldn't have any effect.

  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.

  This setting is usually only on the 2.4 GHz radio. All AirPort base stations do support 20 MHz channels across this tape. I suggest you leave this set to "20 option."

  and put the Express with nothing around him to block the antenna inside, he seems to ignore a little less.

  Most likely, it was the most effective solution. All wireless routers must be placed so that they are in a (possible) clear space for their antennas to be clear... especially of metal objects.

  It is likely that there are too many networks in my residence nearby which are fighting in the spectra of bandwidth...

  It is unfortunately a real problem... and maybe deserves to be studied more, if only to verify that it can be a cause. In an intense environment of Wi - Fi, most people will try to get the "best" of the performance of their network. This could mean, they have implemented their wireless routers to produce a network that can interfere with others without thinking.

  At best, you can try to change the channels that you already find one located on a less used channel... but without duplication of canals, including on the 2.4 GHz band are very limited. (1, 6 or 11 to the United States).

• I have a small studio...

  I have a small studio and step into the world of Daw. Being an old-school guy, I'm used to the knobs and buttons but realize I need to make the leap.

  I bought a Focusrite Saffire Pro 40 8 channels with Firewire interface and is now looking to mini Mac to go with it. It's very confusing, and I wonder what is the right way to go? Focusrite said a mini (less than 5 years) works fine, but then the Ram can be a problem. I have time and again looked for and wonder if anyone out there has any idea?

  I can just buy the USB version of the interface and use it with my windows 10 machine, but everyone I know uses Mac to record music. I don't want a slow computer, latency issues or a lot of hoops to go through here.

  Any advice would be appreciated!

  I use a Mac Mini from 2012 with 16 MB of RAM.

  I have no problem at all - super fast - no latency. I would get the full 16 and you will get a huge helping hand of an SSD.

  I use a 1 TB samsung. The SSD is what makes the biggest difference in performance for me...

  I have no projects with a100 titles - so if your intention is to do something extreme, I can not comment.