Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

Similar Questions

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I try to download the windows update, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE

  When I try to download the update of windows, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE, Please HELP

  Hello

  1. are you able to install some other updates?

  I suggest you try the steps from the link below and check if it helps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941

  Hope this information is useful.

• Can't use the product key, because 2 of the numbers/letters have rubbed off and I can't read them. What should I do?

  My computer crashed and now I have to put in my product key for microsoft. The only problem is that 2 of the numbers/letters have rubbed off and I can't read them. What should I do?

  Original title: product key

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570

  my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  02:42:25 amUTC 23/08/11

• Failed Windows Vista update KB2585542 with error code 80070570

  Since 09/01/12 my computer fails when you try to download KB2585542 update security for Windows Vista with error code 80070570.  Can anyone help/advise please.  I'm on Windows Vista Edition Home Premium.

  Thank you

  Steve

  Hello Steve,.

  Take a look at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/what-does-error-80070570-mean-and-what-is-the/01e8adc0-734c-E011-8dfc-68b599b31bf5

  Note that this thread is for Windows 7, but the logical process still applies.

  Best regards

  Matthew_Ha

• I download the demo version of Lightroom CC for Mac and it bugs with DW021 error code. What should I do?

  I download the demo version of Lightroom CC for Mac and it bugs with DW021 error code. What should I do?

  Hello

  Please visit:-Error 21 or DW021 when installing Photoshop CC 2015

  or

  I need help!

• After that 16 updates have been installed (most important) now my computer is running slowly and stalls, takes to always load anything... What is going on?

  I had 16 updats that microsoft said was important... OK update all now my computer runs very slow and short freezes... was working fine until it updates?

  Hi Valerie Krueger,

  Welcome to the Microsoft community. Looks like that after that the updates have been installed, the computer is running slowly. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  Method 1.

  Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/en-us

  Method 2.

  How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=ke2GRxcvRz-

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx#fbid=p871fE9bGeH

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Windows update fails with error code 57 (KB951847)

  Windows update fails when it encounters an unknown error while trying to install the following:

  Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

  Installation date: 13/11/09
  Installation status: windows has encountered an unknown error: code 57
  Update type: important

  Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

  I would like to have instructions step by step on how to obtain this update to install correctly.

  Thank you

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  ===============

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in...

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
  http://support.Microsoft.com/kb/923100

  After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever I enter the product key, I get error code 0xC004C008, what should I do?

  I installed this program on my other laptop but the motherboard got fried. So I got a new laptop and installed on the laptop and Im getting the error code 0xC004C008. Is it possible to fix this? I have 26 days to activate windows.

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
  http://support.Microsoft.com/kb/938450

  Windows 7 activation error: 0xC004C008
  http://Windows.Microsoft.com/en-GB/Windows7/Windows-7-activation-error-0xC004C008

  You will also need to activate by phone, because your key has already been activated once.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

  Download size: 5.4 MB

  Update type: Important

  Jim,
  Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.