How spin-up retractable hard drives from my laptop to view files.

Similar Questions

• How to change the hard drive from the slave to master drive?

  Original title: drives hard slave to master, how.

  I try to use an external hard drive carrier to download my data files on my laptop. One worked as a data file. The second and third would not show.
  They can be slaves, so how can I change the masters so that I can download them?

  If the suggestion to use disk management doesn't help you, please explain what you mean by "first' and 'second and third."  You have several hard drives, multiple partitions on a single physical disk, or just several files?

  Also explain in detail the steps you take to 'download' (i.e., transfer) the files to your laptop.

  Status 'Master' and 'slave' is not applicable to your situation.

• How can I wipe old hard drive from the laptop of computer death without jeopardizing the new laptop?

  I got a laptop HP who died - apparently the motherboard is bad.  I have to return the laptop to HP for replacement.  I bought equipment to connect the old hard drive to my new laptop via a USB cable and have recovered files that I need, but I want to erase the old drive hard until I got back.

  There seems to be a lot of variation in the hard drive, programs wiping, and I was wondering if someone could point me to one that could fit here.  I am concerned about the running software on my work to access the old hard drive and accidentally damage my portable hard drive to work laptop.  Who is?

  Thanks for the tips.

  Hi Jenny_812,

  You should be able to as long you are sure to pick the right drive for formatting.  See the following article:

  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  I hope this helps!

• How to remove the hard drive of a laptop the dv4 1444dx

  Hello

  Can someone tell me how to remove the hard drive of a 1444dx dv4 notebook? My laptop does not pass enven boot in safe mode. I tried to let repair system automatic and also tried recovery to a date when the latter worked correctly, but neither translates into success.

  I want to remove the hard drive and save my data before trying to reinstall the original image from the D: drive.

  Thanks for any help you can provide.

  Kind regards.

  Hello

  The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

  Kind regards

  DP - K

• DV6-6119wm: HP Pavilion dv6-6119wm - replace the hard drive with a hard drive from a laptop Gateway

  OK (deep breath). I have a dilemma, and I hope that you all can help me.

  First of all, the HP laptop in question is a dv6-6119wm QE069UA #ABA, Windows 7 Home Premium.

  A month ago, it began overheating and then blue screened on me with a fan error. I ran it while I was getting this error, which was a mistake, because according to me, he has finally caused the hard drive failure after enforcement of reset factory several times. But I'm getting ahead.

  I replaced the fan and the heatsink myself. Another factory reset. Downloaded and installed all the updates of windows. Ran great for like a week with the exception of the fault 1 hard disk when I ran the Start Up Test.

  Then when I restarted yesterday... He's dead, so he is dead.  Apparently, the hard drive failed completely and comes only a black screen telling me it cannot start.

  So, I have this other model of Gateway laptop, NV55C26u which has stopped charging. I had to put it away and don't worry. I got out the hard drive and tried HP successfully. ! Sorta.

  It considers that the HP is a gateway and as a result, none of the drivers are there for all the good stuffs HP. It cannot connect to the internet and does not recognize the USB flash drive. (I had downloaded all the drivers on another laptop and put them on a pious flash drive I could convince the hard drive it's HP again). Another hard drive WILL work in the dv6, and I had no errors on startup it upward.

  I have no recovery discs or store bought Windows 7, all came with the laptop preinstalled. But I don't have my key to the label.

  Then what should I do? I'm not exactly tech savvy, I know just enough to be dangerous haha, but I tend to go glassy when things get too technical. I thought I could get something Microsoft to reinstall my Windows but I guess they closed this path down a few months ago.

  I have access to 2 other laptops, both HP. A QE304UA of Pavilion G7 #ABA with Windows 7 Home Premium and a HP 250 G2 Portable F7V84UT #ABAwith Windows 7 Professional.

  So basically in order to encapsulate this novel to the top, which can do here to fix my dv6? How can I convince this other HDD HP rather than Gateway? I can create something from one of these other HP laptops? Download something somewhere? I don't want to have to buy Windows again. I love this phone and need her in my life as a game.

  Please help me

  You must do a clean install of Windows on them. The hard drive has drivers for completely different material. Too bad that you did not have your drive to retrieve the value. It would restore the hard drive to HP with all the drivers/software installed. It would depend if the hard disk is at least the same capacity or larger than the original. Recovery discs are reluctant to a smaller capacity hard drive.

  You can order recovery Medai for about $16:

  https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?cc=us&LC=en&productOid=5173064&softwareitem=656000-002

  ==================================

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

• Restore Vista Premum (32-bit edition) for the new hard drive from the laptop when original disks are lost?

  Hello

  I'm trying to upgrade from my son's laptop computer and want to replace the current drive with a much larger.

  It is running Vista Home premium Edition (32 bit) and he lost his records came with the laptop: I can do?  I bought Windows 7 Upgrade and a disk hard sata 500 GB, but I need to get Vista on the new drive before Windows 7 readers.

  I backed up the data using Windows Easy Transfer for issue restores the operating system.

  Please note that this is a laptop, I can only have a hard drive up both and I don't know how to get the operating system to the new blank disc? I can create a recovery on a DVD disc / C or something Vista or a 3rd party utility?

  Any help is greatly appreciated!

  Contact the manufacturer to see if you have a recovery Partition and if it can create recovery discs.  If so, create the recovery disks and you will be able to use them to restore the system to factory conditions once you have installed the new drive (but you may need to install the new Vista compatible drivers for the new drive as the recovery disks can have only those for the old disk).  Otherwise, contact the manufacturer and get a set of recovery (at a modest price) discs and use them to restore the system to the conditions of the plant on the new drive.  When we talk to them, confirm that their recovery process allows you to install new drivers for the new drive hard during the process and exactly how do (or it doesn't work - so be sure to check it out).  We cannot help you with recovery of the manufacturer process as it their not Microsoft.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tecra 8000 - how to connect the HARD drive to another laptop?

  Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

  I want to just transfer some data, but the connector on the Tecra ac no longer works.

  Hello!

  You can use a drive enclosure external DRIVE with USB port for this.
  The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

  Contact your local computer dealer. I'm sure they will have these cases.

  Good bye

• HP G61-322NR: how to replace the hard drive of my laptop

  I'm new, please help.  Hard drive my laptop has failed and must be replaced.  Can I order a similar disk (a 160 GB SATA drive) on ebay.  Question: when I receive and replace the disk, what steps should I take to the BIOS of the laptop to recognize the new disk, make the primary, and then install the operating system Windows 7 from my recovery DVD?

  Perhaps the BIOS sees the drive automatically and I can simply use the Reccovery DVD?

  Thank you!

  It really is exactly as simple as that. And I'm glad that my metaphor of the car has been heard.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to replace the hard drive in a laptop G500

  I tried to install openSUSE Linux on my new G500 12.3 and were unable to do so. I think there is a problem with the hard drive so I want to replace it. I worked on other phones and they all live on the base which allow you access to the memory and the hard drive. The G500 mouse does not work. How it is falling apart?

  Hi nlgootee,

  Welcome to the Community Forums of Lenovo!

  You will need to remove the screws in the compartment

  

  After that you must slide the cover toward the front of the laptop.

  Note: Be careful on the removal and replacement of parts, any physical or cosmetic damage will not be covered.

  Best regards

  Solid Cruver

  Cheers!

• Access denied when using the docking station hard drive to read old hard drive from the laptop

  I had an HP computer with Windows XP Home Edition on which crashed and recently replaced him with another HP laptop with Windows 7. I had a docking station hard drive to recover the files from my old laptop and followed the steps listed in this question but am still encountering the same problem. I have thousands of pictures on this hard drive, can I get back them?

  Hello

  a: Please make sure that the computer used must have an administrator account and administrator account must be connected while giving permissions. Also, same administrator account should appear in the folder properties.

  b: First of all, we need to take ownership of the folder, select replace the replace the owner of subcontainers and objects .

  c: Then check if the above changes have taken effect.

  d: Then give all permissions.

  Hope this information helps.

• Pavilion 17 t: how to replace a hard drive in the laptop M7H89AV model

  I recently bought a HP Pavilion 17 model t M7H89AV with i7 processor. Oem hard drive is very slow and I want to upgrade to an SSD samsumg evo 850 500 GB. I'm looking at the bottom of the case and I don't see a special slot or the area to remove to replace the drive. It seems to me that the bottom of the laptop come off in one piece. serial number [personal information deleted]. This hard drive is not replaceable?

  There are no manuals for your model. Here is a youtube video showing access hard drive on a very similar model. It's in German but it moves slowly enough so that you can follow:

  https://www.YouTube.com/watch?v=uDAKRL86IjU

  You can see the hard drive at about 07:45 in.

  Take you top down, not the bottom. Technically, the hard drive is not extensible part of the user and security is at risk if you open it. But HP said it's OK to upgrade to an SSD as long as you don't damage in the process. If you do, you're on your own.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to remove the hard drive from Satellite 1730?

  I need to remove the HDD from 1730 Satellite laptop from a friend, someone he can advise that screws I have to delete it please?

  Thank you
  Gary

  Hi Gary,.

  on the new laptops, it's especially easy to remove the drive HARD, but on a Satellite 1730, it is quite difficult! A laptop is very sensitive and built up to complex, so maybe you could damage it something!

  Sammy Bye

• How to remove a hard drive from a virtual computer

  Hello

  I installed a Windows 2003 x 64 Server Virtual Machine and gave him 4 x drives:

  C:\ System

  C:\Data

  Data E:\More

  F:\backup of data

  Now I don't need to use the F:\Backup of data, if I want to remove VMware and Windows.

  How can do this safely?

  Thanks, Julien

  Maelito77 wrote:

  I just did a test on a virtual machine on ESXi3.5 U4 and there is no option to remove the disk while the hot virtual machine. Only when I turned off the virtual machine.

  That's right, in VI 3.5 you cannot delete HDD on the VM race but on vSPhere 4.X, you can, what version you have in the PROD?

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• S35dvd: How to remove the HARD drive?

  Can someone tell me how to remove a hard drive from a s35dvd please? I can't find a manual anywhere, and I need to remove the drive to try to remove a virus load that I can't remove it with windows running or even in safe mode.

  Thank you

  Hello

  Unfortunately this Toshiba device it unknown to me and I don t have found all documents on the replacement HARD drive.
  But as far as I know, there should be only 2 possibilities how to do to remove the HARD drive.
  1.) under the disk HARD is placed at the bottom of the unit and you should only remove the cover of the HARD drive.
  Or

  2.) HARD drive is placed in the Notepad. In this case you will need to Remover the keyboard and some covers to replace the HARD drive

  Well, I can give you only that info. I think that if you want to know the detailed instructions, you should contact Toshiba service partner because it has a more detailed information on these cases.

• How to access the hard drive USB on E3000? Am I missing something?

  I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

  Am I missing something simple?  I use Windows XP.

  Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...