How to remove the hard drive of a laptop the dv4 1444dx

Similar Questions

• Satellite 1410-902: how to remove a HARD drive

  Hello. Anyone know how to remove a disk for a Toshiba Satellite 1410 902?
  Open the Panel here, it's the HARD drive, but there is no obvious way to get it out... I don't want to force it.
  Thanks for the help.

  Luca.

  Hello

  The HARD drive slot is placed at the bottom of the unit. You don't have to remove the screw holding the cover of the slot. Then, you can simply remove the HARD drive.
  But be careful.

• How to remove a hard drive from a virtual computer

  Hello

  I installed a Windows 2003 x 64 Server Virtual Machine and gave him 4 x drives:

  C:\ System

  C:\Data

  Data E:\More

  F:\backup of data

  Now I don't need to use the F:\Backup of data, if I want to remove VMware and Windows.

  How can do this safely?

  Thanks, Julien

  Maelito77 wrote:

  I just did a test on a virtual machine on ESXi3.5 U4 and there is no option to remove the disk while the hot virtual machine. Only when I turned off the virtual machine.

  That's right, in VI 3.5 you cannot delete HDD on the VM race but on vSPhere 4.X, you can, what version you have in the PROD?

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• How spin-up retractable hard drives from my laptop to view files.

  Hi, I have problems with my laptop and the video card (motherboard builtin embedded) is probably bad.

  This isn't what I'm asking here.

  I'm just a little impatient and thinking that I can't fix it (cost ineffective).

  So, is there a way I can take 2 hard disks that are in my notebook and use some sort of any device or means to start them upward in order to extract all of the files that I need them.

  Here's my hardware features:

  Purchased in June 2008

  Laptop HP Pavilion DV9700t Ent

  Video: 512MB Nvidia GeForce 8600M GS

  17.0 "WSXGA + BrightView Widescreen

  Processor Intel core duo T9500

  240 GB at 7200 RPM Sata Dul HD 120GB X 2

  4 GB DDR2 Sys Mem (2 dimm)

  Two hard drives are pop-out and there must be another way I can buy a device type of intermediary for just plug them in and look at my stuff here.

  All the important stuff is saved, but there are several things in areas of work that I prefer not to lose.

  In this era of technology, is there something that you can plug in a hard drive and turn it up and look at things.

  The first hard disk is the 'C' and OS and a few tricks, and the other HD would be ' is secondary and all storage and work areas.

  Thanks in advance,

  I'll be contacting HP support by phone to ask about my other video card problems.

  Hello

  Most of them now use SATA interface. But to be sure, ask the seller for the SATA connection boxes.

  Kind regards.

• S35dvd: How to remove the HARD drive?

  Can someone tell me how to remove a hard drive from a s35dvd please? I can't find a manual anywhere, and I need to remove the drive to try to remove a virus load that I can't remove it with windows running or even in safe mode.

  Thank you

  Hello

  Unfortunately this Toshiba device it unknown to me and I don t have found all documents on the replacement HARD drive.
  But as far as I know, there should be only 2 possibilities how to do to remove the HARD drive.
  1.) under the disk HARD is placed at the bottom of the unit and you should only remove the cover of the HARD drive.
  Or

  2.) HARD drive is placed in the Notepad. In this case you will need to Remover the keyboard and some covers to replace the HARD drive

  Well, I can give you only that info. I think that if you want to know the detailed instructions, you should contact Toshiba service partner because it has a more detailed information on these cases.

• Satellite A30 - how to remove the hard drive

  Hi, new here...

  Can someone tell me how to remove the hard drive in my Tosh A30...

  Thank you
  captainp

  Hi Tim,.

  The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

  The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

  HTH

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

• Tecra R10 - how to remove the HARD drive?

  Is there a description available hoe to remove a hard drive in a Tecra R10 and plugin a new hard drive?

  Hey Buddy,

  As far as I know, the HARD drive is placed under the hood of the laptop and so many parts must be removed as a CD player, keyboard, base assy, etc..

  In my opinion it of a delicate procedure and must be done by a technician laptop because a lot of screws must be removed as well.

  Current HARD disk is defective or why you want to exchange it?

• How to remove the disk HARD passwordon Portege R500?

  Hello

  do you know how to remove the HARD drive password? I know the current password, but if I try to remove it by changing your current password to a blank password, it does not work.
  It has password always news.

  Thank you

  Hello

  I hope that you use the correct and just HARD drive password because it of necessary to remove and delete the existing HARD disk password.
  If you have forgot the password for HARD drive then the HARD drive should be locked and you would not be able to unlock the HARD drive!

  Generally, the HARD drive password can be deleted in the BIOS.
  Please ensure that another password would be removed too.

  I found a forum thread useful on a password disk HARD similar question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=66386𐍒

  According to the information published by the user jonr17 you must first make sure that all other like BIOS passwords, user and supervisor passwords are removed.
  Then try to remove the HDD from the BIOS password.

  Good bye

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Removal of hard drive which is the main partition

  One of my hard drives is broken and I want to remove it from my computer because it takes much more time to start. The drive is the primary drive (I have 2) and I was wondering if I remove the disk will my windows disk 2 change my remaining on the primary disk drive?

  I think it is Yes, but the question, of course.  Thank you very much.

  
  

  Roly

  Hi rolyreefer,

  Many internal hard drives of the riders that in order to configure the main hard drive (master) disk where you install Windows or a secondary (slave) drive, you define where you store programs and files. These riders are of small plastic sleeves that you place on the correct metal jumper pins. For additional instructions, see the documentation that came with the internal hard drive.

  Remove the primary disk may not be affecting the other disk.

  For more information, please see the link below.

  Install or remove a hard drive

  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-hard-disk-drive

  If this does not work, I suggest you to contact computer maufacturer to solve your problem. Unfortunately, we can not help with third party software/hardware changes.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• How to remove the upgrade Windows 7 Professional of D:-drive?

  I bought Windows 7 Professional Upgrade from Windows Vista Home Basic. HUGE MISTAKE! On the Microsoft Store is a nightmare. Finally, I just received a refund. Now, how do the Windows 7 on my D drive where is where idiots to the Microsoft sortore had me download in the first place. now I have vista on drive c and one broke * windows 7 on drive d. HELP, apparently, not a microsoft support t know how?

  If the Visa is still functions (you can load a running Vista), then install EasyBCD and follow the instuctions for EasyBCD listed below. When you are finished with the removal of Windows 7 in the boot (according to instructions) menu, then you can reformat the D: partition, which is where you said Windows 7 was installed.

  ================================================

  EasyBCD - how to remove the invalid entry:
  http://NeoSmart.NET/DL.php?id=1

  When you run EasyBCD, you will see the following great tabs/buttons on the left.

  (1) the display settings: displays the number of entries (bootable version valid and is no longer valid to Windows). The one marked 'default' in the version of Windows that starts if you sit and wait 30 seconds without making a selection using the keyboard. The entrance of remaining are classified by 'Name' (unless renamed all entires will call Windows 7). Drive letter represents the partition that version. If everything that you installed multiple copies of Windows 7 and Vista the path "Bootloader" will always be the same.

  (2) menu of Boot edit: four options 'Up', 'Down', 'Rename' (is very convenient if you want to see a significant name when you first start (I have 5 versions of Windows on one of my test systems, so I reamed the plain jane "Windows 7" "Windows 7 Pro 64-bit" and "Windows 7 Home Premium 32 - Bt, etc." ").)
   
  The last option is "Delete", click on the entry of is no longer valid (for highlight), and click 'delete '.

  You will also see a check mark in the "default" (when 30 timeout expires) version of Windows (vista in your case), the computer will start to place a check mark to one you want to keep.

  Located at the bottom of 'edit Boot Menu' page is the time-out value, if you want automatically to your only remaining version of Windows just place a check mark in the box "Skip boot menu."

  When your done with your changes, be sure to 'Save Settings'.

  J W Stuart: http://www.pagestart.com