How this group program and these values of button cluster in a table?
In the attached programme, there are 6 buttons in a cluster and 1 individual button. These keys select a bunch of different power relay to the different components of a single control device. Currently the program is working in that I can control the 6 buttons, the LED lights in the Council and the power is transmitted. What I do not understand how he does it. I ran the program with execution of highest point on and early reading of the array element, if say I pressed button 6 and click ok, it reads #6, where did they get defined and labeled? and if I wanted to add another button/relay how do I do? If someone could explain step by step how it is a grouping of the relays on the map in a table, then order them I would really appreciate it. Thank you.
Tags: NI Software
Similar Questions
-
How to disable programs and commissioning that run when you start Windows 7
How to disable programs and commissioning that run when you start Windows 7
Hello
References to Vista also apply to Windows 7.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns shows you the complete list of
Locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxMonitor Monitor - free - file system, registry, process, thread and
Activity of the DLL in real-time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
How can I change default digital and enum values in a Cluster of Def Type Strict?
I have a Strict Type Def cluster that contains 10 digital controls and a number of enums. I have changed the default values for the digital controls in the strict Type Def, in customize mode, carried out a 'course values Default do' and did a 'apply changes' and recorded.
This group is used in various places throughout the project and have not found a way to make the default cluster values change downstream. Strict control Type (STD) Def seems to have good values on the front panel. But if I place an instance of this on a white façade and do pass a wire of him in the block diagram with a probe and an indicator, I still get the old default values being passed against the STD.
and still another approach is mentioned in my nugget on definitions of types found here, where I include this picture
To illustrate how a wrapper around the constant type-def avoids not only the "problem of the explostion" (largely set by the new LV 2011 for display as icon feature) can be used to set the defaults AND allow some documents explain what, where and why.
Ben
-
Dual boot, how to transfer programs and files from one XP installation to another?
Due type virus problems and the inability to get things working properly after I finally removed them, I tried to repair windows xp by using the disc that came with the computer (Systemax). Apparently, I managed to rInstaller windows xp pro with the new version under windows.0 and the old version under windows. The new windows.0 boots and is beautifully, and I can find with my old programs and data files. Unfortunately, none of the old programs seem to be accessible. I can reinstall most of them, but what a chore. I can not even the old windows at startup (it literally takes over half an hour) and many programs take a long time to come, if they. Virtually unusable.
What can I do to have access to the previous programs using the new installation of windows xp pro, so I can simply remove the old windows entirely or at least not do it as an option whenever I start.
Thank you
(better known under the name of Brian) buzzstar
* original title - two Windows xp pro on drive, no partition, but one that doesn't work not correctly must the programs, and the 'good' version besoin.*
Hello
It seems that you have made a parallel installation on the system (installed a new operating system on the same partition), we recommend only if a person has to back up files/data that is present on the system.
You cannot transfer programs in this way and we do not recommend you to have two operating systems on the same partition. I suggest you to save files which and records that are important and then do a format clean installation of Windows XP on the system.
Unfortunately, you need to install the programs on the system in order to to use.
I suggest you to check the article mentioned below.
How to install or upgrade to Windows XP
http://support.Microsoft.com/kb/978307
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
How to recover programs and files that have been written too by a full system restore?
Original title: data recovery
Is there a program that will allow me to recover programs and files that have been written too by a full system restore? I had to do a complete system restore, because the computer has been locked up in a start of the closed loop cycle.
Hi Apmech9,
1. don't you restore the computer to factory settings?
2. do you just restore the computer to an earlier time by using the system restore feature in Windows XP?If you restore the computer to its factory settings, you will then get in touch with the manufacturer of the system for more support options.
If you had just restored the computer to an earlier time using System Restore, you can undo the system restore to revert back the changes.
See the article "How to undo a restoration of the system after performing a system restore" in this article of theVisit our Microsoft answers feedback Forum and let us know what you think.
-
How to transfer programs and files from the old office of Windows XP to the new Windows 7 office
Just bought a new desktop computer Gateway with Windows 7. How can I transfer programs and files from my old EMachine with Windows XP.
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions
http://TechNet.Microsoft.com/en-us/library/dd446674%28WS.10%29.aspx
-
How to transfer programs and settings to another partition?
I have on the hard drive with two different partitions. The first is drive c: with Windows 8 on it. Then comes with Windows 7 top unit. My windows 8 is not compatible with my drivers so I started a new copy of Windows 7 on a separate partition. The problem is that all my programs and settings are on my c: Windows 8.
How can I transfer my all my windows 8 files, programs, settings in my windows partition 7 without losing all my files, programs or settings without having to reinstall everything again? Please help me asap :(Program should be installed in the operating system you need to run in. Your files can be transferred or left in there are current place of residence. Settings and files can be transferred via Windows Easy Transfer. Your files could be simply copied across if you wish.
How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista (or Windows 7) based computer
http://support.Microsoft.com/kb/928634/en-usDescription of Windows Easy Transfer for Windows Vista
http://support.Microsoft.com/kb/928635/en-usAs far as programs are concerned, you might look at that and see if it is viable.
PCMover
http://www.laplink.com/PCmover/pcmoverupgradeassistant.html -
How can I track multiple viewers and show only the button continue when all viewers have been consulted?
You need to create user variables to follow each with a default value such as zero who gets reassigned (by advanced Actions) to 1 when the Lightbox is seen (or maybe open to the view). Then, you will need to have a way to triggger a conditional Action checks the values of all these variables in follow-up to determine if the continue button should show.
Pretty standard stuff for Captivate. But it is often beyond the capacity of users.
-
Insert Varray values in a cluster where the table is
Hei,
I use the openG libraries. I have a HAND in cluster that has 2 groups A, B that contains the different controllers (bool, strings, integers, enum) and a C array which has a cluster that contains also various controllers. What I want to do, is to read an INI file and save it in cluster A, B & C table. I managed to write the values for A, B clusters, but with table C, I have a few problems.
How or which is the best way to access the values in the INI file and save it in table C that belongs to a MAIN cluster. The code below is how I do for the cluster A and B.
Thanks for the help.
Hello
I apologize for the poor explanation. I need to work on that. Let's see if I can do better...
I have some sections that I want to represent as clusters AND some sections of an array of clusters where the key values match grapes controls in the INI file. In addition, the VI has a core that has clusters with some elements (int, string, enum) and an array of cluster that also has some elements. I hope that is not confusing. To simplify, I want to write the values for 'children' of the main groups. As you may have noticed that I prepare this code as an object-oriented approach.
Here is the solution I got on LAVA: https://lavag.org/topic/18951-insert-varray-values-into-a-cluster-where-the-array-is/
Thank you for contributing
-
There are e-mails sent to everyone in my address book from my account with my name as the sender. Why would you not save the guards in place to prevent that from happening. These emails are sent with a _ online. I saved a few of them in my junk e-mail folder, I also deleted all in my address book. Now I'm seriously dumping windows all together. I think of Google Chrome, I bet they have what I am looking for a safe place to wander carefree none of my friends.
Hello
Proceed to a very thorough check for malware and then change your password by e-mail.
It is possible for a person to send the email that 'seems' to be of your
account but that is not really - called "Spoofing." That means its 'Possible' emails
were not really you, although they may have your contact list. Have someone
who receives the e-mails to check the header to see where he is actually sent by and
NOT only the answer to the address.E-mail spoofing
http://en.Wikipedia.org/wiki/E-mail_spoofingE-mail spoofing and Phishing
http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htmUnderstanding E-mail Spoofing
http://www.windowsecurity.com/articles/email-spoofing.htmlFraudulent emails (false)
http://pages.eBay.com/education/spooftutorial/Google search - email Spoofing
http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1=============================================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Qosmio G20: How to run programs and movies only on the second screen
It is possible to select what programs are displayed on the secondary display (tv)? If so, how.
If I have a movie on TV he also plays on his laptop computer and all. How can this be stopped IE only play on tv?
Norskman
Hello
Usually, you can change the display with the function FN + F5 devices.
Then, you can change the option for laptop / LCD, LCD, laptop computer screen / TV, TVIf you use the software as WinDVD, so you first change the display device and then use the software.
-
Recovery system files - how to recover programs and files?
Thanks for reading this post.
I had to perform a recovery using F11, that my system would not initialize. Constantly, he'd say he was restartin with it turns ping pong balls, but would not load. Why it crashed is useless at this point.
I run Windows 8.1 and uses a HP15 f039wm.
I saved my backup files before continuing the recovery.
As it is now the USB that was copied in my office has a folder named "System Recovery Files.
There is no .exe file I can locate in the breast.
More precisely my concerns are two: 1) I bought a subscription to Avast and wonder if I can reinstll, don't know where my license key is but could probably contact Avast. (2) I downloaded Mozilla Thunderbird and have the emails and contacts from a variety of e-mail accounts and one account in particular I no longer have access to.
The $64 000 question is: can I get these programs works again with what I saved?
The issue of $99 or $14.99 per month over $ 35.00, fresh installation is, should I contact HP AND they would be able to fix if here, nothing works?
Thanks in advance and I thank you for anyone who can help on Thanksgiving.
You cannot reinstall programs from a backup. They must be reinstalled fresh. You may be able to save the backup of certain data related to programs.
-
How to create sql and read values in peoplecode page?
Hello PS, team
I have different sqls to be executed at the app level and based on the values retrieved I need to fill in the grid which is at level 2.
Could anyone suggest how to use my sql to create the sql function and load the data into the grid accordingly.
Thanks in advance
Page activate PeopleCode is the wrong place to be load data. This should really only be used to show/hide features.
Discover the PeopleBooks - treatment of sequences for more details on the logical place to put the code you're after.
-
WWPN or WWNN ESX host are stored as numbers long. How can I work with these values?
I need to update our database of the machine with the WWPN and WWNN of each ESX host. These are stored in the form of long integers. What is the correct way to deal with a long integer as a partner to a 64-bit mac? Is there a mechanism within vRO for this? If the number has been stored as a string, that I could work with her, but when I try to convert using. toString(), I find myself with an incorrect value.
Hello
something like that
for (var i = 0; i)< hostobject.configmanager.storagesystem.storagedeviceinfo.hostbusadapter.length;="" i++="">
{
If (HBA [i] instanceof VcHostFibreChannelHba)
{
System.Debug ("nodeWorldWideNameHex:" + hbas [i] .nodeWorldWideNameHex);
System.Debug ("portWorldWideNameHex:" + hbas [i] .portWorldWideNameHex);
}
}
-
Hello
I need to activate a fan when the temperature reaches 65 ° C and then only turn off when the temperature reaches 55 ° C. basically, I need to put on with a higher value and turn it off when it gets to a lower value. I tried everything I could, and none made that happen.
The image shows what I have right now. I have a PT100 that convert temperature, voltage, and then I have to multiply the voltage at a given number (60,1403... in this case - linear coefficient) to know the temperature in Labview (less the offset of each PT100). Then I put two outputs in the c - 9178 daq module. If the temperature is above 65 ° C, turns on a port of the module and if its young at 55 ° C it turns on another port. But I don't like that, because between 55 ° C and 65 ° C, the two ports are turned off, and I can't do anything with it. So, everything is bad. I hope you can help me.
Hi 1234,
seems very easy for me:
Have you ever tried to create your algorithm on a sheet of paper?
Maybe you are looking for
-
When I'm on a Web site, when I try to use the e-mail address provided in the contact section of the website whatever, I'm on, as soon as I click on the link to contact this person or persons, it will immediately move to Google Chrome, rather than con
-
SMU Chassis or modules appearing does not in NI Instrument Driver Finder/connecte Intstruments
New user, to debut with a chassis SMU-1073, controlled by a PC, with supply POWER 4113, 4145 SMU and 4071 modules DMM. I installed all the drivers from the supplied USB system and I can indeed see/control of the chassis and modules of NI MAX. When I
-
How can I fix bad host for email?
E-mail I'm trying to set up my email account, I entered the wrong host server I guess, what do I do to fix the problem so I can send email
-
Exception number: c0000005 (access violation)
My computer has been crashing on and off the years and I finally decided to do something - this time the paper in "Dr. Watson" says: Application exception occurred:App: (Pid = 2408) C:\WINDOWS\Explorer.EXEDate: 03/09/2011 @ 04:18:08.546Exception numb
-
On a Vista Home premium computer, one login has very slow keyboard response. It takes 3-4 seconds the button down to get an answer, or a keyboard repeat. Other connections work fine. The mouse works fine. The problem effects all, atfter loging in