Unable to connect to the VMware web service: invalid key file

Similar Questions

• Unable to connect to the VMware Research Service - the SSL certificate verification failed

  Hello world

  to implement the new vCSA 5.1 but I get an error when you try to connect via browser Web Client.

  "Impossible to connect to the VMware Research Service . https://xxx.xxx.xxx.xxx:7444/lookupservice/sdk - The SSL certificate check failed. »

  I've found this KB

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2033338 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 423540040 & StateID = 1% 200% 20423538503

  The manual/work around seems to be a lot of work for me and perhaps this will cause other problems in the service due to problems of certification :/

  I also think that this cannot be the solution for a whole new vCSAppliance...-_-

  I am also able to go to https://xxx.xxx.xxx.xxx:9443 / admin-app

  is it correct for the device?

  You need to regenerate the certificate for Server Appliance after change of IP/hostname.

  Visit this link: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/

  Also, the admin/management interface is https://: 5480

  Lack of credentials [root/vmware]

  HTH

• Job-Run: SELFUPDATE, unable to connect to the ConsoleJobStepExecutorService Web service working system.

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  Natural logarithm of output

  Hello world.

  I am writing from Hungary, sorry for my bad English. You can read my problem above.

  I'm looking for:

  -Oracle Cloud control 12 c version 5

  -Extensibility / auto update / check updates

  -activity of employment-

  SELFUPDATE_20151111104414

  1 race

  11 November 2015 10:44:14 GMT + 01:00

  SYSMAN

  Refresh updates

  but the message: error log:

  Job system failed to connect to the ConsoleJobStepExecutorService Web service. Check the OMS's WebLogic Admin Server for any issues related to Web services configuration that could cause a connection failure.

  and nothing happened.

  
  

  I would like to download and install the microsoft agent x 64 driver.

  
  

  -I can't find anything on the the red message in the internet or in the google...

  -I'm still a beginner in Oracle...

  -MOS, proxy and the credentials are OK.

  
  

  Please help me,

  Thank you for your co-operation in advance

  László
  

  Hi Courtney lamas-Oracle

  First of all. Thank you very much for your help!

  Yesterday, I was able to find the answer to my problem:

  So:

  1. I used consol secure with sleeve and key_strength 2048 (because there were problems connecting my Chrome, IE11 or Firefox to the Weblogic administration Console and the https certificate)

  2. I refreshed DemoIDentity, jks with certificate of keystrength from 512 to 1024 due to the blocking of the browser.

  The solution:

  sure emctl console - portfolio -key_strength 1024

  Restart the WHO

  I've been careless.

  Everything works fine now.

  LACI

• TMSXE unable to connect to the Exchange Web Services

  Hi, we have made our upgrade to TMSXE 3.0.1 2 months ago, and we just started to notice that we can add is no longer the videoconferencing units as the TMSXE does not connect to the integrated Web server. There has been no changes on Exchange servers or server TMSXE. Can someone please provide troubleshooting steps?

  Thank you

  The origin of it was a network problem, as soon as the NETWORK load balancing has been taken out of the loop he was working. Not a problem with TMSXE or TMS.

  / Magnus

• Unable to connect to the Cloud database Service: invalid Option SP2-0306

  I'm trying to create Java Cloud Service, configured the database and Services of cloud storage, but when trying to create the Service of Cloud Java I get the following error:

  "Could not connect to Database Service of Cloud Computing.  Error details: [SP2-0306: invalid option.] Usage: CONN [ECT] [{connection...: SP2-0640: not connected}]. »

  No idea where I was wrong?

  .. .user had forbidden characters.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Connect to the HTTPS web service

  When you try to build the secure web service partner link (URL starts with https://...) I got an error about the lack of certificate? How to provide the cert file < I have a good, but do not know how to enter Web Logic server.

  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/secmanage/identity_trust.html

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Unable to connect to the site Web SSL VPN with firewall zone configured

  I recently updated my 2911 company and set up a firewall area.  This is my first experience with this and I used Cisco Configuration Professional to build the configuration of the firewall first and then edited the names to make it readable by humans.  The only problem I can't solve is to learn site Web SSL VPN from outside.  I can navigate the website and connect without problem from the inside, and even if it was useful to verify that the Routing and the site work properly it is really not what I.  I don't get anything on the syslog for drops because of the firewall server, or for any other reason but packet capture show that no response is received when you try to navigate to the outside Web site.  I am currently using a customer VPN IPSEC solution until I can get this to work and have no problem with it.  I have attached a sanitized with the included relevant lines configuration (deleted ~ 400 lines including logging, many inspections on the movement of the area to the area and the ipsec vpn, which I already mentioned).  I searched anything about this problem and no one has no problem connecting to their Web site, just to get other features to work correctly.  All thoughts are welcome.

  See the security box

  area to area

  Members of Interfaces:

  GigabitEthernet0/0.15

  GigabitEthernet0/0.30

  GigabitEthernet0/0.35

  GigabitEthernet0/0.45

  area outside zone

  Members of Interfaces:

  GigabitEthernet0/1

  sslvpn area area

  Members of Interfaces:

  Virtual-Template1

  SSLVPN-VIF0

  I tried to change the composition of the area on the interface virtual-Template1 to the outside the area nothing helps.

  See the pair area security

  Name of the pair area SSLVPN - AUX-in

  Source-Zone sslvpn-area-zone of Destination in the area

  Service-SSLVPN-AUX-IN-POLICY

  Name of the pair area IN SSLVPN

  Source-Zone in the Destination zone sslvpn-zone

  service-policy IN SSLVPN-POLICY

  Name of the pair area SELF SSLVPN

  Source-Zone sslvpn-area free-zone Destination schedule

  Service-SELF-to-SSLVPN-POLICY

  Zone-pair name IN-> AUTO

  Source-Zone in the Destination zone auto

  Service-IN-to-SELF-POLICY policy

  Name of the pair IN-> IN box

  In the Destination area source-Zone in the area

  service-policy IN IN-POLICY

  Zone-pair name SELF-> OUT

  Source-Zone auto zone of Destination outside the area

  Service-SELF-AUX-OUT-POLICY

  Name of the pair OUT zone-> AUTO

  Source-Zone out-area Destination-area auto

  Service-OUT-to-SELF-POLICY

  Zone-pair name IN-> OUT

  Source-Zone in the Destination area outside zone

  service-strategy ALLOW-ALL

  The pair OUT zone name-> IN

  Source-out-zone-time zone time Zone of Destination in the area

  Service-OUT-to-IN-POLICY

  Name of the pair area SSLVPN-to-SELF

  Source-Zone-Zone of sslvpn-area auto

  Service-SSLVPN-FOR-SELF-POLICY

  I also tried to add a pair of area for the outside zone sslvpn-zone passing all traffic and it doesn't change anything.

  The area of networks

  G0/0.15

  172.16.0.1 26

  G0/0.30

  172.16.0.65/26

  G0/0.35

  172.16.0.129/25

  G0/0.45

  172.18.0.1 28

  Pool of SSL VPN

  172.20.0.1 - 172.20.0.14

  Latest Version of IOS:

  Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M10, RELEASE SOFTWARE (fc1)

  Glad works now. Weird question, no doubt.

  I guess that on the deployment guide said that the firewall will not support inspection of TCP to the free zone, however, class nested maps are used to accomplish this, to be completely honest, I think it's a mess and the best thing to do is action past to auto for the protocols that you want and then drop the rest.

  Let us know if you have any other problems.

  Mike

• WRT160N v3: unable to connect to the page web configuration of the router with Firefox or IE

  Whenever I try to connect to my router's admin page, I get "the connection to the server was reset while the page is loading."  This happens with FIrefox 11 and started when I upgraded to 8 or 9.  A machine running FF 3.6 does not have this problem; I get right in.  Words IE 9 is "Internet Explorer cannot display the webpage" (after complaining about the certificate has expired).

  I ran Wireshark to see if I could learn something, but everything that I could understand was:

  https handshake was OK.

  First TLS packet is received by the router, which then immediately issues a reset and the connection is interrupted.  I don't know why.

  Has anyone seen this? or I have a setup that is screwed to the top (or router)?

  Then I did a full-on reset. I had tried to get in the Mode of administration, following an article in the FAQ, but the web page came in normal mode, default 192.168.1.1. From there on, I WAS able to make the success of downloading the new firmware from 2010 (v3.0.03). Unfortunately, once I've reconfigured the box to a similar to the previous configuration, I have the same problem: connection to https://10.244.122.1 of Firefox 3.6 works; 12 Firefox (now), it will fail, get the error "reset while page is loading". My last try will just disable the https - I just discovered where I can - and see if it will work. Because it's only on my home network, if traffic to the configuration page is not encrypted it really doesn't matter that much. (I had previously determined using Wireshark happened to reset during the TLS negotiation after the HTTPS had finished). And hell, that worked. So my problem is not resolved, but it is bypassed and I'll mark it closed.,.

• Smartphones blackBerry HELP - unable to connect to the Blackberry Protect service?

  Today I had an update on my blackberry curve blackberry 9630, on my old phone I used blackberry protect to save my contacts, texts, etc.
  I used it to transfer data before so much confidence, but now it doesn't seem to work.
  I downloaded the app and it is now stuck on the "connect to blackberry protect service" page with the green circle, it was like that for an hour or two.
  I have a full data plan and it worked there the past, can someone help me? Thank you.

  The servers seem to be until now. If this isn't the case, refresh your service books.

  Ron

• Unable to connect to the site Web Microsoft Fix It

  Original title: Microsoft Fix It

  I am unable to get it in Microsoft Fix. Continues to request that I sign and yet there is no way of signing in.

  All instructions are in light gray and I can't get instructions on how to proceed even if I am sighen in Microsoft?

  These Fix - Its are very overpriced and often do not work. I wouldn't worry, frankly.

  What is your real problem? I'm sure someone here can help you solve without needing to run a Fix - It.

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.