Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

Similar Questions

• Impossible to activate the Premium Web Services HO Officejet 6700

  Printer is connected to a wireless home network. Using the contorl Panel set up printer continues to say "update could not be downloaded. Press Retry but still fails. Active WiFi connection and his work.

  I understand that you're having trouble getting web services to activate.
  Follow these steps.

  1. open an internet browser type IP address.
  2 should bring you to the status of the printer page.
  3. Select the tab network at the top.
  4. left side select IPv4 under wireless.
  5. under addressConfiguration DNS, select manual DNS server.
  6. for favorite enter 8.8.8.8
  7. for alternate enter 8.8.4.4
  8. Select apply. You can get a warning saying that this could break the connection which is very good.
  9 turn the printer off for about 30 seconds, and then try again to access the applications.

  Let me know how it goes.

• Basic authentication for the WSDL Web Service for load test

  I am trying to load test a web service; the URL of the WSDL is behind a user name and password using http basic authentication. I can add the URL of the WSDL without problem with the user name and password, but when I read the script, I receive a "401 Unauthorized" errors
  
  I looked at the preferences > recording > Web Services > the Proxy Configuration, and then refer you to the preferences > recording > HTTP > the Proxy settings. I also looked at similar settings under Preferences > reading.
  
  I'm running OpenScript (9.1), how to configure it...?
  
  Thank you very much!
  
  KM
  
  Published by: KM 14 Sep, 2011 12:12

  Hello

  You can right click on the section to initialize your script and then:

  Add-> other-> HTTP-> authentication.

  You need 3 parameters:

  A - http://someurl - url that will authenticate any url that contains the http://someurl string for example http://someurl.com/index.html
  A password
  A user

  The following code should be added in your script:

  http.addAuthentication("http://someurl", "username",
                      deobfuscate("5blNah5kX/XuZnepYwInFw=="));
  

  Hope this helps

  Alex

• Adobe Acrobat 7.0 - reinstalled on the new PC, impossible to activate, the Adobe customer service sent link to download the new? others? Version. Installed, but on the installer said series

  With raw interface of Adobe, I thought that the screen that gave me was to ask the question; He didn't inform me that I was typing the subject line. But unless clunkily review:

  Have an old but legitimate copy of Adobe 7.0. I had to get a new computer. I reinstalled A7.0 of my disks, but Internet and phone reactivation failed. After having jumped through the independent windows on the Adobe site, found the link to Customer Service chat. The representative told me that I had to download a new one? different? A7.0 version leave a link, he sent me. I did it.

  I have successfully downloaded the new? version 7.0 and installed it. But the installation, when I was asked for my serial number, he said it was an invalid number. I tried again, without dashes, without success. I went back to the Adobe Customer Service, where a person told me that I had to download a new? different? A7.0 version. I told her to re-read my original post, I had already done. After a long wait, she told me that she did not know much about A7.0 and told me to go to the Adobe communities.

  So, Adobe communities, here hoping one of you has the most knowledge about the installation of Adobe Acrobat, Adobe Acrobat Customer Service!

  Thank you

  Marc

  Sounds like you are trying to install with the ORIGINAL serial number provided with your product rather than the NEW one with the download.

  Adobe do support the last two versions (10 and 11) so if they have knowledge of 7 at all it's just a lucky accident...!

  Furthermore, I hope that you install on an old computer to Windows XP, because you won't get far in Windows 7 or Windows 8 with this version...

• DeskJet HP 3830: impossible to activate the scan on mac for 3830 aio

  Impossible to enable analysis of the computer using the hp utility or by using easy scan, but can analyze whether I go to System Preferences and then printers then scan that works very well, I tried to remove and reinstall several times but it makes no difference.

  The connection to the printer over the network and works very well on printing as well if it's not a connection issue.

  Any help would be useful

  Hello
  In the Applications folder or its subfolder HP remove all existing HP Scan or app HP Easy Scan by moving it to the trash, then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Now, check if you can see a difference when accessing the HP utility
  Kind regards
  Shlomi

• With the help of an activity to run Web services for webservice secure.

  Hi when I try to use the activity run the Web Service, I get the error "' object Refrence not set by an object" . " My WSDL needs a credentials for acess.

  Can any one done in the face of the question before? Please help with resolution.

  Please find the attached images of W.F.

  Concerning

  REDA

  Normally, I saw this error when a field is missing entry or is not a valid XML code or something to that effect.

  I do a ton of work web based services and I never use the Execute. It is slower and I prefer to write my own web calls.

  To use the http web request for your case I would download and use SOAP UI.

  Load the WSDL in SOAP UI and it will help you to configure web calls that you can then transfer it to the http web request.

  If you need more information, I suggest you check some of my blogs. I have abit blog on custom creation and such.

  -shaun

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Could not contact the Flickr web service

  In recent weeks, I am unable to upload pictures directly from LR on Flickr.

  The message I get:

  "Cannot update this collection.

  Could not contact the Flickr web service. Please check your Internet connection. »

  
  

  LR version 2015.1.1

  Generation 1032027

  
  

  Flickr Pro account.

  
  

  Any advice? I'm happy test the beta fix only if available.

  
  

  I used to use the plugin to Jeffrey, and it's (I think still is) a fantastic product. Again, having a built-in feature delivered with LR has won my heart.

  BTW: it seems that the issue is on the side of Flickr and relates to their limitation (IP based) network. I don't understand why they do it and why too drastic. Try again potentially additional native plugin LR Flickr could help.

  It was enough for me to activate VPN to route traffic through a server in San Francisco and it's all very well now. My original traffic was from London.

  Boring, but has less there is a workaround.

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• A web service for windows authentication

  Hello
  I have a number of web services on a windows server.
  These web services are for a program client (in vb.net), access and retrieve data.
  This client program are launching for the PC of the individual user.
  The above configuration is in a windows domain.
  Currently, web services allow anonymous access. This means that anyone in the Organization, with the correct URL is able to trigger the web service.
  We are asked to remove anonymous access and all forms authentication configuration.
  Questions

  1. What is the best practice for configuration for a web service for windows authentication.

  2. We also have a couple of unix servers. They are required to access the web services (with the correct authentication). How can I get a cross-environment configuration?
  Thanks in advance.

  Hey Wee Hoe Chiang,

  The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n