How to activate a reminder for when a shared review has reached its end date?

Similar Questions

• Can you tell when a loaded SWF has reached its last picture?

  I used loadMovie to load an external SWF into half less of a main "shell" swf When the loaded SWF playback (it's just an animation) finished, I need to fill in a text field with the word "DONE". The text field lies on the _root, and I need a way to know when the loaded SWF file has reached its last picture...
  
  It would be obviously easy if I had the. FLA of the loaded SWF file because I could write any actionscript code on the last frame of the SWF to fill the textfield _root. Alas, I do not have the source of the loaded SWF FLA, so I need a way to have the "shell" SWF/FLA main know when this loaded SWF has reached its end. Is this possible?
  
  Thank you!!!
  

  DIY_Lobotomy,

  > The reality of my situation, it's that there is only a 'menu' of sorts that
  > Gets load in "contentClip". This "menu" has a bunch of links.

  So far so good.

  > When you click on it, each link load a DIFFERENT swf file in 'contentClip '.
  > It's THESE sovereign wealth funds I need to see the end of.

  It is always correct.

  > There is actually more than one, so they're not exactly being
  > loaded directly from my main movie, because they are actually loaded
  > based on a link that is clicked in the movie that is currently loaded
  > in "containerClip".

  The concept is still the same, no matter what happens. Any depth the
  a clip-expenses-other chain goes, you have to keep the notches on each link in the chain.
  When the last link has loaded, you will be able to make your object reference
  in this clip. This film clip - because it's an instance of the
  Class MovieClip - will have the properties _currentframe and _totalframes.
  You'll just check * that * cliip instead named properties
  contentClip in my own example.

  You can run a loop using onEnterFrame or, if you prefer, with setInterva().
  Is not little matter, as long as ask you repeatedly deep
  clip to test its current image against its last picture (this assumes that)
  the test clip is a linear animation matching the end to his
  last image; otherwise, you could check against this arbitrary _currentframe
  The frame number).

  > I hope it was not too complicated! You always have a solution?

  Not too confused to understand, but it might be confusing to the road
  through in practice. Not to be confused, actually, but meticulous... you will
  be careful with your multiple paths. The nested clips are very similar
  folders nested on your hard drive. The instance names relate to the
  folder names.

  Now, if this menu is not an instance name you condition - or if
  the forks on the way has an instance name you can't control - you can
  always refer to nested clips. If you test your file in the
  Debugger Panel, you will see all the instances arranged in hierarchical order.
  You will see that automatic instance names are provided (something like
  ("instance1", "instance2", etc.).

  David Stiller
  Contributor, how to cheat in Flash CS3
  http://tinyurl.com/2cp6na
  "Luck is the residue of good design."

• How to activate a button only when an item of component tilelist is selected

  Simple question, but it seems quite difficult for me. How to activate a button only when an item in a tilelist currently selected?

  For example, lets say if I have a button named button1, which is disabled by default and a tilelist component called tilelist1 that I should add in brackets the following (the enabled property of the button) code to make sure that the button is only enabled when an item in the tilelist component is currently selected but disabled when no item is selected :-

  enabled = "{}".

  Enabled = "{tilelist1. SelectedItem} ".

  that should do it, it is making an implicit comparison with null (tilelist1.selectedItem == null) which will result in a Boolean value.

  SelectedItem is null when nothing is selected, non-null when something is.

• How to activate the trace for request to define in oracle application?

  How to activate the trace for request to define in oracle application?

  Please see and steps/comments for 'Presentation of simultaneous program' in (Doc ID 1516355.1).

  Thank you

  Hussein

• Hi microsoft... Please help im using firefox, how the task i hidden bar when I watch YouTube... its always show when I watch any video please help

  Hi microsoft... Please help im using firefox, how the task i hidden bar when I watch YouTube... its always show when I watch any video please help

  You can ask the Firefox forum.
  http://forums.mozillazine.org/index.php?c=4

  I hope this helps.

• How to determine if a table has reached the end

  I use a recursive list of files with a loop for. This in the end is a table, and I want to lnow when the files table has reached the last file if I read them one by one, without deleting them.

  Maybe I don't understand, but if you connect to a loop and indexing is enabled, the loop stops when the last element indexed, just wire the number of loops.

• How can I activate the alert for when I leave an encrypted page?

  I disabled inadvertently alert for when I leave an encrypted page, and want to turn it on, I know when I leave a page that is well attached. He used to be an option to do this, but I'm not. Help someone?

  The settings for warning messages have been removed from the UI (Bug 513166).

  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn_leaving_secure

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference
  • Preferences that have changed also show "BOLD" (user set)
  • Preferences can be reset via the context menu by default if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean).

• LaserJet 1100: How to activate the driver for my HP Laserjet 1100

  How can I activate the driver for my HP Laserjet 1100 downloaded my c:\1100 subdirectory?  I unzipped, but what now?

  Hello

  This is a printer old vry much older than XP. Please follow the instructions below:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=25470&docLocale=en_US&docid=emr_na-bpl11035

  More information:

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/setupInstallResults?sp4ts.Oid=25470&AC.admitted=1474076634611.1123376534.199480143

  Kind regards.

• How to activate the task for Windows XP Media Center Manager

  Some how my task manager got disabled.  How to activate it?  I have Windows XP media center edition.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to activate the burst for agent OBIEE include the authority

  Hello

  I am planning an agent for a report so that each recipient receives a copy of the scheduled report based their authority, which is based on a specific column. (Service ID). Service ID is present as a column in the report.

  Authority is already configured using variables of session (based on the service ID) of the RPD. Power comes into play when a user belonging to the newspaper Department OBIEE. They see the relevant lines for their Department (based on this session variable).

  Now instead of users logging in and running these reports, I'm talking program this report to a single agent is able to send this report and each user receives a copy of the reports, but with lines only for their Department.  Also I cannot use external e-mail recipient and not as beneficiaries user OBIEE.  Now RPD based authority can therefore not be used to make sure that each user receives the report with only their relevant lines (because its based on the variable session whose value depends on the user that connects to run the report)

  I created a separate report '"Agent recipients' username, useremail and userdepartment, and this added as Agent-> Condition.

  So I try to use "'get the beneficiaries of the analysis used in the Agent status ' and selecting 'useremail' column to specify recipients. "

  Now, how to establish the relationship between present userdepartment in the report of condition '"Agent recipients' and the service that is present in the main planning report ID?

  Thank you

  
  

  
  

  Also I cannot use external e-mail recipient and not as beneficiaries user OBIEE.

  Basically that answered your question: you cannot.

  When OBI sends the content as a specific user - so pick up his profile with the variables of session etc. - then OBI made connection implied to pick up what impossible operating system info if you send it to random outside the e-mail address.

  Not sure you can do something with chained agents either since you would have a question on the current 'email random' as a criterion for child agent filtering and analysis contained in. Fadlng on a web service action that calls the web agent service OBI for each line of the native agent might do the trick, but I've never tried. In addition, it would be quite a complicated solution.

• How to activate sound alerts for mail (incoming or outgoing)

  I recently bought a new iPad but when I send an e-mail or receive an e-mail there is no sound notification. The volume is on. Any ideas how to turn the notifications please? Thank you.

  Have you checked the settings in settings > general > Sound AND settings > Notifications > Mail? Other sounds work?

• How to activate java tm platfrom when mozilla blocks it-trying to load Pogo games

  I have reinstalled and uninstalled java, tried to activate java plug-ins, but mozilla keeps blocking my java platform™. When you try to load pogo games, I get a message error loading game. Help, please.

  Hi Ana,

  ·         Have you tried to use the link on Internet Explorer?

  If the problem is limited to Mozilla Firefox, I suggest you to connect with the help of Firefox.

• How to activate the EQ for 2.1 DOM prelude

  Hi all

  I tried the similar techniqes used for first pro 7.1 CC to activate the DOM of the QE to Prelude2.1.

  Copied the empty text file extendscriptprqe.txt in C:\Program Files\Adobe\Adobe prelude CC-didn't work. always on display error: qe is not defined

  Also tried writing app.enableQE (); in the extendscript feature - did not work, error: app.enableQE is not a function

  Help, please...

  Thank you and Regerds,

  Anoop NR

  Hello

  I sent you a sample panel and the doc of the API by mail.

  Any other questions, please let me know.

  Lei

• How to activate my gmail account when changing business catalyst accommodation

  I just changed my hosting of Web sites to Business Catalyst. My email associated with the account is a gmail account, but it contains my domain name at the end (I don't know if it is an account of Google App. I signed up for it 2 years ago and do not pay for it).

  I have to change any additional settings of Muse or Gmail to succeed this switch?  My old site accommodation suggested I change MX settings, but I'm not sure how to do this in Muse and Business Catalyst.

  Thank you!!!

  Hello

  If you want to continue to use google for email service, then you must create the external MX record on your BC site and select the option of Google mail server... Please visit the following link http://helpx.adobe.com/business-catalyst/partner/set-email-external-email-provider.html

  I hope this helps.

  See you soon!

  Aish

• How can I the indication for when an email is read by the recipient

  I would like to know when I send mail is received and read.

  Thank you

  the drafting of the mail.

  Menu options (alt + p) > receipt.