Disabled Touchpad T440

Similar Questions

• Portege R830 - cannot disable touchpad

  Hello, strange question. But can not turn off the touchpad on a Portégé R830 (Windows 7 32 bit). I've seen this problem on two of the machines I have. This has never been a problem for the models Tecra I got, M5, M9, M10, M11, etc. R840.

  I have the latest driver installed Alps, from Toshiba.co.uk. I tried the button on the touchpad, it does not work. The device of the Alps can be disabled in the Device Manager. I tried the Toucpad of the State system, Advanced tab, toolbar properties Advanced settings. It doesn't have a single parameter «Disable touchpad» There is no option to disable the touchpad when you use a USB mouse - however, this does not work.

  Can anyone help with this? The only other option I can think of is the BIOS, but it would be inappropriate to my users, who may want to turn it back on it at a certain point during execution of Windows.

  Hi liamw,

  You can disable the touchpad if you press the FN + F9 key combination. The touchpad will be disabled until you press this combination of keys again, but a mouse external isn t touched. That means you can still use a same USB touchpad mouse is disabled with FN + F9 key combination.

  Check this box!

• HP envy 15 t-q400: permanently disable touchpad

  Hi everyone, does anyone know how to permanently disable a synaptics touchpad? I went to the touchpad settings and clicked on disable touchpad so that disable touchpad when a usb mouse is connected. My problem is that when I reboot, the pad touchpad is enabled again and I have to repeat the steps above. Is it possible to disable permanently? Maybe something in the bios? I also uninstalled the synaptics driver, but my touchpad still works.

  Hello

  Try the following.

  First of all, if she has not already reinstalled, install the driver Synaptics, and then restart the laptop.

  When Windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Open the control panel of Synaptics and set options to 'disable the touchpad' and 'disable the touchpad when a usb mouse is connected', and then apply the change.

  Check if the settings is now kept after a reboot.

  Kind regards

  DP - K

• Cannot disable touchpad on the Qosmio series F

  I reinstalled windows from backup DVD. Now, I can't disable touchpad after the plug in USB mouse. What should I do?

  All you need to do is use the FN + F9 key combination and choose the DISABLED option. You can also check the properties of the mouse. There must be the same option too.

• IdeaPad Y410 Disable Touchpad

  On my new Lenovo IdeaPad Y410, the touchpad, while nice, is big enough, and when I type, the edge of my Palm frequently bumps it slightly, with like a click and shake completely as I type. There is the button disable touchpad with Fn + F6, but apparently not actually disable the touchpad, even if the led lights on the front. Any fix for that?

  Problem solved--apparently on the new computer, I had, the pilots had not been updated. Win8 gestures properly, as well as neutralizing him.

• WANT x 360 laptop: how to disable TouchPad on ENVY x 360 laptop?

  1. I have no key.

  2. I have attached a mouse but the TouchPad is always enabled.

  3. I have 2 options, but all of them are frozen:

  Control Panel\Hardware and Sound\Tapping\TouchPad Settings\Double to disable Zone press to activate or disable the TouchPad

  Control Panel\Hardware and Sound\Tapping\Top Action\Switch wide TouchPad left

  So, what can I do to disable the TouchPad on ENVY x 360 laptop?

  Solved.

  Solution:

  Start /.

  Research /.

  Personalize your computer.

  Change mouse pointers.

  HP control area settings.

  Disable HP control of area

  Source:

  http://h30434.www3.HP.com/T5/TouchSmart-PC/how-to-disable-touchpad-on-HP-envy-TouchSmart-M7-notebook-PC/TD-p/3180731

• Disable touchpad HP Envy 17

  I have exactly the same problem you have posted... Do you have a solution?  There is no 'mouse' or "Point Touch Control Pad" with a disable to kill the touchpad.  I am thinking to resort to disassemble the laptop and unplug the cable that plugs into the touchpad itself.  I also deleted the synaptic touch pad (Windows 7) device driver and did not help.

  I'm pretty sure that remove the cable from the touch pad will fix the problem, but it is a fairly long process... 20 with respect to and then if I still wanted to sell the laptop, I would probably have to plug the cable back in again for someone else.

  Please help, Dave

  I've done what I suggested above to remove the flat cable for the touchpad disable touchpad and it worked very well.   I removed the two ends and folded cable where HP had folded it and scotch taped it to the system board next to the connector where it plugs IO on the system board so that someone will be able to put it back in if I never sold it.  On the plug, it has a little fitting valve rubber to flip upward to allow you to remove the cable at both ends.  I don't have any errors saying that it was not connected.  After the cable has been removed it simply does not work which is exactly what I wanted.    Problem solved.

  Dave

• Cannot disable touchpad on laptop. does not display the properties of inmouse

  cannot disable touchpad

  Hi hillarybell,

  ·         What I have

  s of the brand and model of the laptop?

  ·         Did you do changes on the computer before the show?

  ·         What happens when you try to disable the touchpad?

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager. Follow these steps:

  (a) click Start, run type devmgmt.msc and press enter.

  (b) in Device Manager, expand mice and other pointing devices and locate the touchpad.

  option c) right click on the touchpad and click disable . Click OK.

  You can also consult the manual of the laptop for more information and help.

• ATTN: Zaq attack disable touchpad when mouse is used. HP Netbook Mini 110-3530NR, Windows 7

  How to automatically disable touchpad when the mouse is used

  Say hello to new coppens1.

  I'm glad to hear that you were able to find a solution to this problem!  Also, thank you very much for the update.  I will make sure you and remember for future use.

  Have an amazing week!

• Cannot disable Touchpad on Windows 7.

  I am running Windows 7 and I want to disable the touchpad. When I try to disable it in Device Manager, the option 'Disable' is not clickable. When I try 'Delete' option, it says I have to restart my computer to apply the changes, but after that I restarted my computer, the Touchpad is still active.

  Thank you.

  Hello

  I got an even hard to disable touchpad, and I had the problem in this way. If possible, connect an external mouse into a USB port, then open the Touchpad control properties tab and look for a framework written something like this: disable the Touchpad when an external mouse is detected.

  Go back to Device Manager, and then try to disable the Touchpad. As an external mouse is already connected so I have a registered pointing device, Windows would let me disable the Touchpad without reinstalling on the next reboot.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Satellite L455D - How can I disable touchpad & WiFi slow

  I just got this new laptop and I really NEED to disable the touchpad. It drives me crazy jumping everywhere when I type.

  I tried Fn + F9 and it does not work. I looked in the control panel and I can uninstall the drivers, but can't turn it off. I like to use a mouse ball roll except when I'm traveling, so I don't want to uninstall the drivers. Is there a simple way to turn it off?

  In addition, it seems to be EXTREMELY slow to access the internet with a Wi - Fi connection. Nothing is different with my internet connection or service except that cell phone provider is probably ten times slower than my old laptop.

  Any suggestions would be greatly appreciated.
  I can't go back to Acer because the motherboard is dead or I would be.

  > Is there a simple way to turn it off?

  Go to the Panel control-equipment and audio peripheral slot and printers, click the mouse, you will see the Touchpad settings windows. In this touchpad settings windows, go to the device settings and check, disable the external internal when pointing device usb pointing device is connected, press on, apply, and Ok.

  > I tried Fn + F9 and it does not work

  Have you tried to update the vap utility and support of Flashcard on [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] remove previous utility installed vap and reboot the laptop. Then, remove support for flashcard. and restart again. After that, install the Vap support and Visual support cards.

  > Also, it seems to be EXTREMELY slow to access the internet with free Wi - Fi. Nothing is different with my internet connection or provider of services except this laptop is
  > probably ten times slower than my old laptop.

  try to update driver wlan:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• Equium L300 - cannot disable touchpad Vista Help

  I know my little laptop is a little dated now, but I just had to have a new HDD and redo everything.

  Since then I was able to disable the touchpad.

  Any help would be appreciated. Thank you.

  Windows vista ultimate running sound.

  Lisa

  Hello

  I guess that you can not use the FN + F9 options. Right?
  This means that you have not installed the driver for the touchpad and / or the VAP (value added package).

  Do it to get the keys FN working again.

• Satellite A100-033: disable touchpad when the USB mouse is conencted

  I have a Toshiba Satellite running Vista Home Basic.
  Recently, I had a catastrophic failure of the Windows and had to install it from scratch.

  Before the failure, I had found a few (well hidden) setting that invalidates the touchpad automatically whenever an external USB mouse was connected.
  To the left it works whenever the mouse is disconnected.

  Can someone help me? (He had nothing to do with the Synaptics driver, which does not allow this.)

  Hello

  I can activated and disable this feature in my dashboard-> mouse settings

  In the mouse settings, I choose the device settings tab, and then I can check the option called disable pointing device internal when the eternal USB pointing device is attached.

  Welcome them

• Cannot disable Touchpad on the Satellite A200-13O

  Hello, have a Satellite A200-13O, I got a USB mouse, and when it is connected I need it TouchPad.
  So I try to disable it by FN + F9, but it does not work.

  Any idea? I really need to solve this problem.

  Thank you very much for your help.
  Aviad.

  Hello

  Is your laptop preinstalled with recovery image Toshiba or you have installed your own operating system?

• Example: Pavilion 15-ba015na: disable touchpad on 15-ba015na

  Hi, naoual bought HP laptop laptop 15-ba015na. I am more comfortable with an external mouse and a trendy. I work but does the touchpad, I want to turn off. With my old Toshiba Satellite phone is simple with the fn keys. Does anyone have a solution for my HP? Browsing the net, I found a possibility, but he was terribly complicated, and I'm not techno wizz, to say the least surI not even write on the right map...

  I appreciate all help. TIA.

  Hello

  You should be able to do the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  Since the new layout, select the entry for the mouse and then select the tab settings of the ClickPad.

  Enter a check mark against "Disable pointing device internal when the external USB pointing device is attached", then click on apply then Ok to save the change.

  

  Kind regards

  DP - K