Similar Questions

• Re: Satellite A500-02J - how to disable the internal speakers?

  Hi all

  I use Satelite A500-02J, but when I plug in external speakers, my internal speakers still work, how do I disable it?

  Hey,.

  Normally the internal speakers will be cut automatically if you connect headphones or external speakers. At least on my laptop it of the case

  Hmm I put t know what OS you have installed, but you should check the audio settings. Generally you can cut off the internal speakers if you have connected an external.

  Alternative, I recommend that you update the audio driver. You can find the latest version on the official website of Toshiba.

  I hope that helps! :)

• How to disable the internal speakers?

  I have Windows 7 and are the standard audio Realtek.
  When I plug a set of external speakers, internal speakers are not automatically turned off, and I can't understand to change this setting. Anyone?
  I use the laptop for professional presentations, in front of a large audience and I need these speakers to transform...!
  Thanx.

  Hi thysgc,

  I think that it would be necessary to show a little more detail on your laptop, which model you have exactly?

  Normally if you connect external speakers, a window driver sound will pop up where you can choose between connected headphone or line out (external speakers), but both options will shut off the internal speakers.

  In any case, have you checked the Web from Toshiba site for the pilot of his most recent?

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• How can I configure a new TimeCapsule for an existing network without having to activate the internal networks?

  I tried to go in advance and choose "Add TimeCapsule to the existing network", but it keeps defaulting to 'add a new network '.

  without having to activate the internal networks?

  "Add TimeCapsule to the existing network.

  You cannot add a TC in an existing network, if there is.

  You must configure the TC for the network.

  It keeps default back to "add a new network.

  So, it's OK... The TC is part of an existing network or makes a new.

  You must connect to the TC network... either wireless or ethernet.

  However, you can manually configure the TC simply plug ethernet for example.

  See, cable using Time Capsule for Mac for backup only.

  The same can be done for the wireless... but a TC is really the bad device for backups if you don't have a network... It's cheaper, faster and more reliable by using a USB key.

• How can I get the internal speakers to work on a hpvs15 screen

  I have NEEDED HELP GETTING THE INTERNAL speakers to WORK ON A HPVS15 MONTOR!

  Hello

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.  Does that help?

  Consult this Manual.  Go into the on-screen display-->> volume and turn up to max all the sounds?

  Don't forget that you have a green audio cable plugged into the monitor and audio output on your PC port. Don't forget to unplug the headphones.

  Try a PC speaker separated in order to eliminate the PC as the problem.  You can also try the monitor and cable on another PC.

• audio output lists only the internal speakers when usb is connected to the dac

  This problem happened after I had used my mbp for months as music server in a stereo system.  When I have the mbp connected via USB to an external digital to analog converter (dac), audio preferences had always listed the CAD.  Now it lists only the internal speakers.  I tried to reboot, checked my UBS cable, checked my dac.  The only thing I've done recently is to create a playlist and sync a new iPod to copy the playlist we.  I don't know if that could have anything to create the problem of lack of dac, but I am a relative novice on computers.

  Anyone have this problem or knows how to fix?

  -Try other USB port

  -The signs to see the CASD of life like the lights on?

  -Maybe the CAD failed.

  -Try the following

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• I just switched to El Capitan - cannot get the internal speakers to play alerts

  Hello, I went from my output to a DAC using the Audio MIDI Set up and everything has worked. Then when I switched the output to the speakers they would not play any alerts - alerts were never neglected internal. Regular audio won't play - just no alert. -I looked into his system - it - preferences interface, everything looks good still does not. I changed the settings on the format via the interface Audio MIDI, thinking that would help, but none of the settings changed anything. Basically, everything seems OK in the settings, but no matter what I do, the internal speakers won't play alerts. Does anyone know how to fix this? Any help would be greatly appreciated.

  I use an iMac 27 "from the end of 2012.

  

  < image edited by host to remove personal information >

  Have you checked the preferences system-> sound-> sound effects to ensure that the proper device is selected in the pull down "replay the sound effects?"

  

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• T440 - Sound does not switch between the internal speakers and headphones listening or return

  Hello community,

  Let me first explain how I assumed that the switch between headset and speakers should work:
  I turn on the music or anything else and if no headphones are connected, all sound from the internal speakers. Now if I plug headphones then sound comes exclusively from the helmet. If I go out then again the sound comes from the speakers and so on.

  In my case, the situation is the following:
  If I have no headset connected and turn on the music, then I heard if via the speakers. If I decide to continue to listen to this music through a headphone and plug them in, then the music continues to come from the speakers, but for example, the outlook notification sound is delivered in the headphones. It works vice versa.
  If I open, say youtube for a video, while having the headphone is plugged, I hear the sound through them. If I now unplugg, them, the speakers will remain silent.

  What can I do that if there is no external speakers connected (helmet, etc.) all sound will be played through the internal speakers, if I plug in a kind of external speaker, it's their part and if I unplugg it it switches back on the internal speakers?

  Thank you very much for your help!

  Best regards

  Look in Control Panel audio Realtek. It should be an option multistreaming, make sure it is set to unify all devices.

• How to check the internal operations, Manager of competitor status in Oracle Apps R12 of en

  Step by step how to check the internal operations, Manager of competitor status in Oracle Apps R12 of front end and how to start their.

  Richa says:
  Step by step how to check the internal operations, Manager of competitor status in Oracle Apps R12 from front end

  Simultaneous treatment - platform generic competitor Manager Questions / answers [ID 105133.1]

  and how to start the

  (1) using the adcmctl.sh (from the backend)
  (2) using the button Activate (from front) - http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248

  Thank you
  Hussein

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• How to activate the BT on the Satellite C660-184?

  Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it.

  It would be useful that this information came with a link that I can use to act on the information.

  Does anyone know how bluetooth can be enabled on my computer?

  All the info and the latest BT downloads, you can find the portal of Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/

  How to activate the BT?
  Activate WLAN first and when WLAN led on the key FN + F8 use combination and allow to BT

• r204tx: how to activate the deletion warning on hp computer laptop r204tx

  Hi all!

  Recently I bought hp laptop r204tx with Win. 8.1 - 64 bit, however, whenever I want to delete any file, folder, etc. I press the button Delete and deletes directly without any warning or alert!

  Please, help me to solve this problem and enable the alert message for the delete option...

  Thanks in advance!

  How to activate the Confirmation alert delete:

  http://www.askvg.com/how-to-enable-delete-confirmation-dialog-box-in-Windows-8/