HP Pavilion dv6 power supply problem

I have a Pavilion dv6 for the past three years; It worked perfectly until recently.

Two months ago he began to take more time for the prosecution, but he continued to work

fine. The battery always charge at a slower pace, but now there's another more

serious problem.

If the battery status says he has some fees (even up to 98%), but as soon as

I pull the plug on, the computer dies immediately. It does not even

turn on if I do not connect the charger. If I turn on the computer with charger

connected, the battery status is always the same. If I leave the computer for a couple

days without connected charger, the battery loses some (but not charging

too); This means that the battery itself is not really in a very bad state.

I suspect some hardware glitch! What could be the problem; y at - it an idea?

Control of operation of the equipment (battery test):

http://support.HP.com/us-en/document/c01443317

or

http://support.HP.com/us-en/document/c03463381

Tags: Notebooks

Similar Questions

  • Pavilion 17F061us: power supply problems

    Yesterday I noticed that my laptop is running on battery power, even if we connected it with the adapter/power cord. If we unplug the power cord from the battery is exhausted and visualizes time on battery.  While we have plugged into the wall it still shows on the battery, but it does not destroy.  She remains stable at the current level of battery power (ex: all day yesterday, it was plugged in and showed the other 70%.)  To do this, not fees, but also not to lose more power.  When I unplugged the power cord battery power starts flowing as expected.  The box on the adapter cord feels slightly warm, will be especially warm before this current problem.  Taking wiggles but only slightly and waved to does not affect the power somehow.  I shutdown, removed the battery and tried restarted with the power supply cord is plugged in, it does not start.  I am currently planning to order a new power cord/adapter charger but not sure that this is the problem.  Is anyway to know if it's decision and not the wrong other than exclude with a new shot cord cord?   Also, is there anything else I may be missing it could be?

    Hi there @Aeg50,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that your HP Pavilion 17 - f061us Notebook PC is running on battery power and maintain a charge while the AC adapter is connected, but when you connected the AC adapter without the battery attached to the laptop would not turn.

    I did some research and found some documents for you based on a problem that you had described.

    Please follow these troubleshooting steps, re-post and let me know the results.

    Thank you!

    Have a great day!

  • Pavilion dv6: power problem

    I am using hp pavilion dv6-7135nr. Need a power supply problem, when I run the hp battery test it shows ok status but when I plug the power, he died. battery is not at all, but now it shows 80% at first but after more then 10 days, it's 50%, I observed a problem with my mechine befor this load problem he suddenlt remove power from the battery when it cut down to 25%. and even I put its low power alerts but is suddenly off my mechine. Please guide me on this problem

    Problem solved, it was a battery issue, I just replaced battery and it works fine. infect the Hp need to improve he essement battery hp software.

  • Pavilion a6655f: hard drive or power supply problem?

    A few days ago, I was trying to low loading part of the steam.  My download speed is 30 kbs, obviously not good.

    I did some basic checks, malware, viruses, etc., but did not find any problem.  I did a diagnostic check and got a BIOHD-8 error code, which indicates a hard drive problem.  I decided to try to reset the computer back to the factory setting before changing the hard drive and once that I made and updated windows Vista for several hours, I restarted the diagnosis and he came clean.  Then I updated my software, including steam and a few games.  Downloads were fast and had no problems.  Later that night the computer started to shut down randomly, and I was unable to run any games.  Thinking it's maybe a power supply problem, I have replaced my graphics card with an elder who needs less energy.  I am able to run without any problems so far.  So, I'm looking for help in identifying my problem.  HDD problem, power supply, something else?  Any thoughts are appreciated.

    Pavilion a6655f

    Windows Vista

    PS 500 watts

    WD hard drive provided with the computer

    Thank you.

    Ken

    Hard to say without proper trials.

    You can use a hardware monitor HW Monitor to monitor tensions it is: http://www.cpuid.com/softwares/hwmonitor.html
    But there is no software that can test a power supply.

    You can get a tester of hardware like this too: http://www.newegg.com/Product/Produc...82E16899887005

    But there is really no of it will predict fails if the power supply, if you overloaded it, if its duration in time high, or if the power supply is a device of poor quality that can be subject to failure.

    You can also check that your power cable is comfortably installed on the computer and not frayed.  Try a different wall jack where there are fluctuations in power.

  • Power Supply problem when installing Windows 7

    So I'll keep this short and to the point. I was upgraded yesterday from Vista to 7. Has made all the necessary updates and restart before installing 7. While it was installing, I weppe out of the room, came back and my monitor was empty... Silly me, I thought it was a reboot during installation. Futher glance, the monitor is in standby mode and the PC itself has been disabled. I waited about 10 minutes and it was always off. So I hit the power button, and it will not turn back. Tried the flipping of switches, different cables. Even called tech support, to get your warranty has expired and its $ 99 for me you tell the problem... Then he became the Lady on the line, telling me something I already knew... I got a power supply problem and I had to mapy 340.00 to repair... My question is this... It was just the stars lining up properly and my diet is to bite the dust while I have been upgraded or is there more behind it?

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    "Download Windows 7 installed and activated on your PC."

    They will help you in the Windows 7 Forum at the above address.

    See you soon. Mick Murphy - Microsoft partner

  • 3525 Deskjet printer power supply problem

    Brand new printer, I have been connected, printed OK. Once off, lights not again unless you pull on the power cord plug, then plug it in yet. Then can be turned on. But once off so the same problem all over again. I tried different plugs/Sockets, same problem with them all. Same thing happens when the printer is connected to the electric network without being connected to a laptop Desk/computer. Is this a power supply problem? Is it not ridiculous to do out of the box?

    Thanks for any help,

    Nicholas

    Hi Nicolas,.

    The latest firmware should solve the problem you are experiencing.

    Download and install the update of the firmware for your operating system below:

    32 bits:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128070-2&cc=us&DLC=en&LC=en&OS=4157&product=5241265&sw_lang=

    64 bit:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-128071-2&cc=us&DLC=en&LC=en&OS=4158&product=5241265&sw_lang=

    If the printer connected to your PC via the wireless network and the update fails to install, connect the printer with a USB port in order to complete this update, or update your device from its screen as follows:

    http://support.HP.com/us-en/document/c03250770

    Kind regards

    Shlomi

  • Power HP Pavilion Slimline s3000 supply problems

    Hey!  The power supply on my Hp Pavilion Slimline s3000 seems to be corrupted.  The green light in the back, but nothing moves or uo beyond that light sources.  I opened the computer and when I listen carefully when I press the power button a few noises come from the lower end of the power supply near the fan.  When I searched these forums said that a cap may be broken, but I have not seen those that may be broken.  If I want to move my 160 Watt power higher, what should I do? If I went to a 200 or 225 watts then I should add something?  and it is possible that the power supply is not broken and miss me something?

    Specifications:

    HP Pavilion slimline s3000

    WIndows VIsta

    No message, no recent changes

    The S3000 series uses a power supply 160W. Common diagnostic page is here.  Suggest that you search for the pricing part # 5188-7520. Cross-reference to the PSU 200W here

  • Power supply problem - HP Pavilion a6000

    Desktop will not power.

    HP Pavilion a6000.  Power supply: Bestec, Ref. HP 5188-2622

    Press the power button / stop for 10 seconds.  Red switch moved back.  According to the Web site.

    Nothing has changed.

    Here is what is happening now:

    Machine unplugged

    Green LED - off

    Plug the power adapter.

    Green LED - suite

    Press the power button

    Light in the power button blinks momentarily (the beginning of being depressed) then turns off

    Power supply fan turns momentarily then stops.

    Green LED - off

    Remove the power plug

    Green led is lit for 5 to 7 seconds, then turns off.

    Events repeat if I plug again.

    Any advice?

    He will be generous with points...

    Looks like you need to replace the power supply. You can buy the same HP unit or replace it with something like the Corsair CX500 if you wish.

    Please send Bravo

  • With Tecra750DVD power supply problem

    My laptop recently decided to refuse to turn on when I turned on. There is a yellow light in the position of "power" over the front of the machine, but it won't start. I tried all the options: Power Supply Unit only, only battery, Power Supply Unit + battery and nothing works. Fuse is good in the plug of power supply. Battery is less than 12 months.

    Hello

    You can remove the battery completely when problemshooting this kind of predicament.

    First of all - what impression the power button? Does it feel as it should? Refers to how it used to feel? If this is not the case, check if there is an active "lock" behind it.

    Some models have a safety lock to keep the machine from accidentally start in a bag or two.
    Please look at the LED that indicates that your adapter is connected. When you try to switch the machine on, what is happening with this LED? Always the same fixed green light or suddenly out or flashing?
    If out, please try to get your hands on another adapter (borrow prefferably). If it flashes then try to remove the AC adapter, remove any option that can be easily removed, CD/DVD, memory, expansion card PC and so on.
    Try to restart it (remember to join HQ again). Even? If Yes, then sorry to say I think that your machine needs service. If this isn't the case, then there could be hope.

    Disconnect the AC and put back in place the units that you have deleted before, one by one and after each unit, try to restart the machine.
    If it starts fine, remove the unit and reconnect the next unit. Perhaps you will find that there is a problem with an external device (memory, CD, PC Card and so on), then at least you can continue working more or less as before the problem.

    Good luck

    Tom

  • On Satellite P100 power supply problem

    Hai
    I bought the new laptop Satellite P100. Suddenly it does not start (no power to notebook) and the same time, I have only checked by the only power a/c no result, also do not charge the battery. I put t know what is the reason. Can someone give suggestion?
    Thank you bye.

    If the power light is blinking there is probably a problem with the electronic power supply. In this case, the laptop sends flashes code. Read this code, technicians can identify the problem.
    Please, don't waste your time but the closest service provider contact allowed in your country.
    After 18 months of that guarantee must be valid (it depends of course on where you live) as well as the repair must be free.

  • HPZ620Workstation and Evga Titan SCBlack POWER SUPPLY PROBLEM Edition

    Hello world

    I bought (Evga Titan SC Black Edition), but I have a problem with my power supply hpz620

    http://www.plugloadsolutions.com/psu_reports/HP_S10-800P1A_ECOS%202609_800W_Report.PDF

    I have two xeon processors (2 * 135W) and my question is the graphics card has enough power to do with the rest?

    Second problem is the molex cable I have only one. What is the best solution for me?

    Edition of black titan sc EVGA specification

    Performance

    NVIDIA GTX TITAN BLACK

    Hearts CUDA 2880

    967 MHz Base clock

    Boost 1072 MHz clock

    Memory

    6144 MB, 384-bit GDDR5

    7000 MHz (in force)

    336 Gbps of bandwidth

    Hello:

    You can also ask your question on the HP Business Support Forum - z section of workstations.

    http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U4CnZ-lOW9I

  • HP pavilion a1710n power supply needs replacement.

    I have an old HP Pavilion a1710n desktop power supply crashed and burned and needs to be replaced.  I've never been on a power supply on this computer before I upgraded memory and dial-up fans in the past.

    I already ran through the list control to full power on this site to confirm that it is food that is broken and needs replacement and no cord or anything else.

    I also confirmed what power to order part.  At this point, I just need to see a video of step by step on how to replace the power supply inside the computer tower or read the good strong guidelines for how to do it.

    Some advice there?

    Thank you

    It doesn't seem to be a video on the site of HP but it is an easy process.

    (1) turn off your computer and disconnect the power supply. Remove the power cord from the power outlet.

    (2) open the casing and place the computer on its side (open side upward).

    (3) take pictures where going to each power cable.

    (4) disconnect all power connections.

    (5) remove the four screws on the back of the housing supply by keeping in place.

    (6) turn the power off (can be a "locking tab" now in place.

    (7) reverse the steps to install your new power supply.

    Refer to photos for the location of the place where to reconnect the power cables.

  • HP Envy Pheonix 810-210: Possible POWER supply problem?

    I bought the HP Envy 810-210 a Phoenix earlier this year and recently replaced a 645 GTX graphic card a GTX 960. When I replaced it I noticed the power cord was appropriate is more good in the power supply and can fluctuate a little. Now when I move my PC, the power cord will be disconnected and will Crackle. This turns off my computer and I have to tinker with a correct position in the socket to restart.

    What would be the recommended action for this? Is this a problem of cord or plug, do you? Y at - it a power supply that matches or is better than that which is currently in my computer (here), which will be a fit if it needs to be replaced?

    Hello

    The CX600 Corsair or CS650m would be an excellent choice for a power supply.

  • Pavilion dv6: blue screen problem

    GET THIS EACH THEN & NOW THE SCREEN AND MUST SHUT DOWN LAPPY. PLEASE HELP WITH THE SOLUTION!

    HI @Ayushi_kh

    Thank you for your response.

    Here is a link to the HP Pavilion dv6 Notebook PC. Please see Chapter 4 for removal and replacement.

    When I was browsing through the maintenance and service guide, I noticed you have switchable graphics.

    That being said, I suggest you do a recovery in factory.  This will reinstall the drivers of graphics cards correctly and I hope to solve this problem.

    Performing a recovery of system HP (Windows 7)

    During the recovery, there is an option to backup your personal data if you do not have a recently I'd do one now to avoid any data loss.

    Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

    If for any reason any recovery did not resolve the issue please provides your exact model of DV6.

    How can I find my model number or product number?

    Good luck!

  • Strange on my Satellite A100 power supply problem

    Hi I hope it's just me in Sun.

    I plugged my power on my laptop today and found that no power is getting to the laptop. I checked all the obvious things like the fuse and have even tested the output of the power supply with a multimeter and I get what looks like the correct voltage.

    However, when the power supply is plugged into my laptop blue "alternating current" does not and windows wants to say I'm running out of battery.

    Someone else had this problem? It is a work of repair and return? (I hope really not).

    Thank you

    Doug

    > Is this a work of repair and return
    I'm afraid, m Yes :(

    But the question is; malfunction of what part?  :|
    Maybe that your inquiry is good and everything is ok with the AC adapter / CC.
    This means that there could be something wrong with the laptop itself.

    Maybe it's only one loses the connection between the plug and the motherboard or most serious problem as a malfunction electronics power?  :|

    Who knows. It of very difficult to say what's wrong without any diagnostic tests
    I recommend you contact a technician in your country. He could check the laptop and found much faster fault as a user simply ordinary like you and me.

    Good luck

Maybe you are looking for

  • HP Probook s 4320 - wifi problems

    Thanks in advance for reading and pay attention to this frustrating problem I have. I use a HP Probook s 4320 and just reinstalled Windows 7, as well as all pilots & assistant wireless etc. At home, I have a broadband thanks Talk Talk (UK), through a

  • Photosmart HP 6520: HP 6520 will not scan

    6520 used to work without problem on the old pc w/windows 7. I have a new Toshiba satellite w/AMD 8. Prints fine but will not computer scan. Message on printer said computer unresponsive and check the usb connection. I rebooted driver did not help.

  • Fully updated XP SP3 random crashes (Nothing in the logs that show a mistake or an accident)

    Randomly throughout the day (18:41 29/01/11 18:33 01/29/11, 14:19 on 29/01/11 and 11:31 01/28/11) Windows will crash. What happens before the crash is the normal workload on one of these applications; Internet explore, Outlook 2010 and Front Page. Th

  • Ab219TX: Integrated 10/100 BASE-T Ethernet LAN

    Hello I need drivers for WIndows 7 Pro 64-bit Ethernet controller PCI\VEN_10EC & DEV_8136 & SUBSYS_8096103C & REV_0A PCI\VEN_10EC & DEV_8136 & SUBSYS_8096103C PCI\VEN_10EC & DEV_8136 & CC_020000 PCI\VEN_10EC & DEV_8136 & CC_0200 Network controller PC

  • Problem updating to windows 10

    c1900101-40017