How can I get the internal speakers to work on a hpvs15 screen




Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.  Does that help?

Consult this Manual.  Go into the on-screen display-->> volume and turn up to max all the sounds?

Don't forget that you have a green audio cable plugged into the monitor and audio output on your PC port. Don't forget to unplug the headphones.

Try a PC speaker separated in order to eliminate the PC as the problem.  You can also try the monitor and cable on another PC.

Tags: HP Desktops

Similar Questions

  • How can I get the HP Laserjet P3005 work in Vista?

    I tried all the drivers that are listed in the download area drivers. I connected the printer via USB, it says that the generic driver will not work.  He can not get the printer to recognize. Now, when I plug the printer to the usb port, it appears in Device Mgr as USB hub generic.  I can't figure out how to install this printer.

    Sorry, my bad.

    Run the file and take note of the extracted path.

    (for example C:\HP LJP3005 PCL6 driver)

    Connect the USB cable to your PC and to ignore auto-detection.

    Enter the control panel > printers

    Click on the bar of tools add printer, and then select a local printer.

    Select the listed USB port (e.g., USB001 or DOT4 USB) and click Next

    Below is the list of printers, click on 'disk '.

    Enter the location of the extracted folder, then click Browse and select the file hpc300xc.

    Now, click Open and then OK

    If you see several models of printers, select the correct one and click OK until the end of the wizard.

  • my monitor is broken on my laptop and I connected an additional monitor. How can I get the extra monitor to work while not in safe mode?

    Someone hit my monitor and broke. I connected a regular monitor, but will only work in safe mode. How can I disable the broken screen so that I can use my laptop?

    Hi, try the normal mod F1, F4 or F5 Fn (function) button for the track changes and change the default monitor.

    Safe mode, select monitors in Control Panel.

  • How can I get the Disk Defragmenter to work?

    Disk Defragmenter won't start for defragmentation, what I do?


    You should ask this question in the answers – Windows Forums for your version of Windows.

    Answers - Windows Forums


    Defrag problems are often related to the corruption of disk.

    Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run check disk in Windows 7


    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN


    How to fix the system files of Windows 7 with the System File Checker

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7


    For even better and more efficient to check:

    At the Recovery Console prompt (if you have one) or from a Windows 7
    disc - if you do not have a Windows 7 disc you can borrow a friend (it must be the same 32
    or 64-bit, and they are not protected against copying) or make a. Also your system manufacturer will sell the
    physical disks cheap since you already own windows.

    Chkdsk /f /r


    After k and before space / f and before.



    Space after c and before.

    How to start on the System Recovery Options in Windows 7

    What are the system recovery options in Windows 7?


    If CheckDisk is unable to fill as above:

    If ChkDsk does not start in Windows 7 or Vista

    How to difficulty Chkdsk will not run at startup in Vista (Windows 7 is the same)


    If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
    protected. The manufacturer of your system will also sell the physical DVD cheap since you already
    Clean Windows. You can also do an ERD on another computer.

    If you need to repair disks - these help repair Windows not re-install.

    How to create a Windows 7 system repair disc


    If there are still problems of disc:

    Manufacturer diagnostic utilities - run one to your hard drive

    Corrected list dated 06/09/2010

    Fujitsu hard drives: utility of diagnosis here

    Hitachi hard drives: utility of diagnosis here

    IBM hard drives: use Hitachi utility *.

    Toshiba hard drives: use Hitachi or Maxtor utilities

    Maxtor hard drives: Diagnostic Utilities here (now SeaGate)

    Quantum hard drives: use the Maxtor utilities

    Seagate hard drives: here Diagnostic utilities

    Conner hard drives: use the Seagate utilities

    Hard drives Samsung: utility of diagnosis here

    Hard drives Western Digital: utility of diagnosis here

    Trial versions of one of these 'might' help.


    HD Tune


    New settings command-line command for Defrag.exe in Windows 7

    Defrag options in Windows 7

    Defragmentation of the command-line for more control


    Here are excellent free 3rd defragmenters party which I use.

    Auslogics Disk Defrag - FREE - works easily and does a great job

    Very powerful - FREE - MyDefrag

    Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
    This compact and portable Windows application supports NTFS and FAT32 file systems.

    Also check this and other "related links" here:

    How to use Windows 7 Disk Defragmenter

    How to enable or disable the Windows 7 Disk Defragmenter schedule

    I hope this helps.

  • How can I get the CC desktop application works correctly?


    I bought a subscription, and now I am trying to install Adobe CC applications on my computer.

    Unfortunately, NOTHING works as it should...

    I tried calling support but they don't have me recalled more.

    Today, I finally managed to get the creative Cloud Desktop application installed, but it keeps giving me this message:

    "Creative cloud Setup no longer works, please uninstall and download again...". »

    I think I've tried all the suggestions, I've found. Uninstalling the application, repair disk permissions, stop and restart, using the cleaning tool, rename the OOBE folder in my library... All measures of any order and with a reboot and repair the permissions of the drive between the two.

    Also, I followed all the steps here: use of the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

    The only thing I can think that don't go as described is the verification of the cleaning tool, also no log file is created.

    -When you see the message "Adobe Creative cloud cleaning tool completed successfully", click on quit and restart your computer.

    -In a text editor, such as TextEdit, open /Users/ [user name] / Adobe Creative cloud cleanser Tool.log.

    I don't know what remains perhaps, is there anyone who has had similar problems and has found a way around it?
    Any help is appreciated

    By the way, my MacBook Pro 13 "retina runs OSX 10.9.5 on an Intel Core i5 2.4 GHz with 16 GB or RAM. Cs6 all apps work without a lot of problems...

    Try following the procedure below

    Click on Finder and then hold down command + SHIFT + G keys on your keyboard

    It will open to go to the window of the folder, type exactly ~/Library and click Go

    Then open Application Support > Adobe files

    Files Recycle Bin AAMUpdater and OOBE.

    Now click on the finder and press command + SHIFT + G keys on your keyboard.

    This time, type / library and click on Go.

    Be sure to remove ~ symbol.

    Then open Application Support > Adobe files.

    Basket AAMUpdater, Adobe Application manager, records OOBE.

    Now click on Finder and then hold command + SHIFT + U keys on your keyboard.

    It will open the Utilities folder.

    Trash Adobe Creative Cloud and Adobe Application Manager files

    Cleanup tool download and run CC below link

    e nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc dure/proc_par/step_3/step_par/download/file.res/

    Accept the license agreement and click Adobe Application Manager

    Click then on clean selected

    Close the window

    Download and install Creative Cloud App link below

    Free creative Cloud | Download the free trial version Adobe Creative Cloud

  • How can I get the highlighting tool to work correctly?

    When I click on the highlight tool, I get the text selection indicator to highlight, but I can't go any further.  The text is not growing.  What I am doing wrong? >

    The document must be an image.  I can't select words, just a box.  I checked some documents that I knew were test and the tool works properlywith them.  Thanks for responding.


  • How can I get the spell checker to work on emails?

    New computer. Using Mozilla Thunderbird for email but the spell checker does not work.

    Do you have a dictionary installed or selected? (See attached image).

    You have activated the spell under Tools | Options of| Composition | The spelling?

    You can also download a dictionary in the settings pane opened by the latter sense, but the link it provides is almost certainly open in Thunderbird. At some point, it of better with the right button and select 'Open in browser' and it will re - open in your default browser. From there, you can download. I would recommend you right click on the proposed link, use "Save as" and download it. You can then drag the file downloaded from the window modules modules of Thunderbird, or use the small button to the left of the search box in the window.

  • How can I get the iminent emonticons to work on Messaging Instant yahoo

    Ive downloaded and its on my yahoo messenger but I cannot get to work, if anyone knows, can you please explain its called IMINENT there a red buble one two white dots for the eyes in her mind years a white curve for a smile, it's wht love the look of the icon that is displayed by using iminenet please

    Red wit Buble one two white dots for the eyes in her years a white curve for a smile

    Ask Yahoo!?  The closest I can find using your description (red bubble, white eyes) is labeled 'angry' here:

    If not, my guess would be that somewhere there is a typing error.   ; )


    Robert Aldwinckle

  • How can I get the button tab to work again?

    The button tab and the '+' have been working fine until this morning. Since this afternoon, however, they are all two has stopped working. I click on each of them and nothing happens. I can't open a new tab. I have to open multiple browsers in order to work with the different windows. I followed the suggestion of another user and checked the Add-ons, and nothing happened. I have no ASK bar, so that came out also. Can you help me? I ran out of resources. Thank you!

    Hi, madperson! And thanks for your reply. Yesterday, when I posted my request, I had already run FF in safe mode and checked all the (and some) ext/addons I have. The problem persisted, while I posted my question. This morning, however, the glitch seems to have emptied himself! The button tab and the icon "+" both work as before! Don't ask me what happened, I couldn't even begin to try to explain. In any case, here's the ext/addons I: Norton Protection against vulnerabilities. Personas; Flash Video Downloader; Groowe Search Toolbar (which was proposed by Mozilla); and Yahoo Toolbar. Thanks again for your help, I appreciate it.

  • I'm using Firefox 3.6 on my PC, and now, when I select file > new tab (Ctrl + T), no new tab appears. Neither it appears when I click on the new symbol of the tab next to my other tabs. How can I get the feature tab to work again?

    In the past 48 hours, all of a sudden, the new tab featured on my PC, using Firefox 3.56, simply stopped working. I do not change the settings, or download a new version of Firefox. It has just stopped working. There are other scenarios where it still works (for example, if I want to open a link in a web page, I can right click and open link in a new tab), but if I want simply to have several websites open at one time on my PC, I have to have multiple versions of Firefox open as my new tab option seems to be disabled or something. Can you help me?

    Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  • How can I get the Disk Defragmenter to work under Vista?

    Disk Cleanup cannot get Disk Defragmenter to work.


    I wasn't a big fan of the disk in vista Defragmenter

    Download a little program called auslogic disk defrag and its FREE and works very well!



  • How can I get the external classes to work in AS3? Sample included.

    I'm doing this work, and something basic must be absent.  Its straight out of the Adobe Help file example.

    CS4, Actionscript 3

    Here's what I do:

    1 create a .as file and name it "HelloWorldExample.

    2 put the script below into it and save it.

    3. create a .fla file and save it in the same directory.

    4. in the .fla file, put "HelloWorldExample" in the class of Document properties field

    5 save and run the film.

    I get a white screen.  Nothing.  I tried a few other examples, but I was not able to get ALL of the external .as files to run. It is the simplest.

    Do I need to import them or call them in some way other than step 4?

    I missed something?



    flash.text.engine import. *;

    import flash.display.Sprite;

    SerializableAttribute public class HelloWorldExample extends Sprite


    public void HelloWorldExample()


    var str = "Hello World!" This is Flash Text Engine! « ;

    var format: ElementFormat = new ElementFormat();

    var textElement: TextElement = new TextElement (str, format);

    var textBlock:TextBlock = new TextBlock();

    textBlock.content = textElement;

    var textLine1:TextLine = textBlock.createTextLine (null, 300);

    addChild (textLine1);

    textLine1.x = 30;

    textLine1.y = 30;




    As long as you have your class paths set correctly, it is best to have your .as files in an another loc that your. Fla. What happens if you want to use the same class in different .fla? You will copy in each project file? That kind of defeats, the purpose of the use of classes and then, because if you change it you must change it in various places. Not good. No OOD.

    So: Edit > Preferences > AS3 settings - add paths to the source path, or a path... something like c:\flashclasses\as3

    Inside of your as3 application you assign to your package files. If you use TweenLite need you:



    TweenLite classes

    or yours:



    my classes

    then you would be important as:

    import com.greensock.TweenLite;

    import com.myDomain.myClass;

    Make sense?

  • I have upgraded to Windows 8. How can I get the switchable graphics to work?

    Windows 8 was released a little over a month and several users have had the desire to upgrade their laptop for Windows 8.

    However, the laptop doesn't have any Windows 8 at HP software, because it is not yet approved for Windows 8.

    This usually results in video cards being turned on so only used Intel graphics card.  Some symptoms of this is the laptop is running more hot than usual and the battery life is significantly short due to these two cards being fed at the same time.

    This isn't an official solution to this problem, but it worked for me and others.

    1. install the HP software framework found here.

    Credit for finding this link goes to CherylG.

    2. then, uninstall all ATI/AMD software through programs and features.

    3. go to and select Support and drivers at the top.

    4. Select software downloads and the pilot, then enter your product model or product number.

    5. Select the most recent operating system corresponding to your installation of Windows 8 bit architecture.  For example, Windows 7 64 bit for 64-bit Windows 8.

    6 download the ATI graphics card driver.

    7. run the file once it is finished downloading.

    8. let the finished extraction process, but cancel the installation when you are prompted to continue after extraction.  Note where this is extracted to.  By default, this should be c:\swsetup\.

    9. here, there should be a setup.exe to install the ATI driver.  Right-click it and select troubleshoot compatibility.

    10 follow the troulbeshooter of compatibility and select the suggested fixes.  On one screen, there will be a button of test program.  Click here to begin the installation.

    11. follow the installation and it must successfully complete.

    12. Once completed, right click on the desktop to check that configures it with the switchable graphics option is listed.

    Once this done, switchable graphics should work fine on most systems.  This translates into reduced heat and charge the battery lasting longer.

    While this may not work for everyone, he worked for many users.

    I hope this helps.

  • After connect my headset I can not get my internal speaker to work

    How can I get my internal speakers work again?


    1. what operating system is installed on your computer?

    2. what happens when you unplug the headphones? The speaker starts to work?

    3. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1:

    Step 1:

    a. Click Start, type Sound in the box to start the search.
    b. click sound in the results of search at the top of the start menu.
    c. click the reading notice the check mark next to the default device. For most users, the default device is internal speakers. Make sure that the audio settings are configured as expected.

    (Valid for Windows 7 and Vista)

    Step 2:

    Try the steps from the link below.

    (For Windows XP)

    Method 2: No sound in Windows.

    Hope this information is useful.

  • How can I get the sound card to play on the speakers of the car?

    How can I get the sound card to play on the speakers of the car?

    Usually connecting the phone to the car system - particularly at the point where you can play the music usually connects the Maps app

    There is a switch at the bottom of the maps app with a speaker symbol that allows you to toggle between having the sound coming through the phone or Bluetooth

Maybe you are looking for

  • Disc is stuck in drive iMac

    Eject and command-E do not cause the disc to eject from the drive.

  • 7.15 Skype on Windows Vista freezes on startup

    I've updated to Skype latest version 7.14 and 7.15 on my Windows Vista and after this update, Skype starts ever upward. Even if he starts, he ends up Skype closes with a problem. Completely uninstalled and resinstalled, checked the updates of windows

  • I need an exact search for my DV7 motherboard replacement

    My HP Pavilion DV7 laptop had its motherboard damaged earlier and needs it replaced. Is it possible to get a motherboard for this laptop? Product #: QD984UAR #ABA Thank you Also would make me really happy if you could include the reference number or

  • Windows 7: included Microsoft Games don't work

    I recently bought a new Toshiba with Windows 7 (about two weeks ago).  Microsoft Games (Solitaire, Spider Solitaire, etc.) do not work.  When you try to open them, they will not appear on the bar of tasks or in the Task Manager.  All I have this prob

  • spacing of email staff signarture

    I created a personal signature and in the email I create looks good, when I go to print a copy of my email, there are additional spaces between each line. \ How can I get rid of the extra spaces? Thank you. Bob Harvey