How to activate the repeat buttons in Vista?

Similar Questions

• How to activate the VBScript engine in Vista SP 2

  I desperately need to know how to activate the engine of VBScript in Vista SP 2, so I can download chart DisplayLink.

  Hello
   
  I suggest you run a fix it which may help you to solve your problem:
  http://go.Microsoft.com/?linkid=9648765
   

• Portege R500: How to activate the control buttons after the new installation of Vista

  I reinstalled my R500 with another image of Vista Toshibe to recreate the image.
  I then started to install the drivers and tools, but I don't know how to set up two command buttons so I can turn on/off background light.

  If I go to the Toshiba assist program all the info is empty.
  Do - what someone know how to activate this new or can tell me what are their parameters in the program of Toshiba?

  Yes, the computer has been restarted several times.

  Rgds
  Karsten

  You need to download and reinstall the Package Toshiba Vista added value.
  This package contains various applications such as TOSHIBA components common driver and utilities TOSHIBA, TOSHIBA Flash Cards, which are required to use the buttons.

  Check it out man

• How to activate the new button in the Workbench of invoice in Payables in 12.1.1

  Hi all
  
  In accounts payable, the new button in the workbench invoice showing off.
  I use 12.1.1 version.
  Could someone please help me how can I activate this new button.
  I am creating the invoice through workbench invoice no quick Invoice window.
  
  Thank you

  Hello

  This could be due to several reasons...

  Reason n ° 1 = you only access and not allowed to create invoices

  Survey Navigation responsibility for accounts payable = > bills > inquiry > invoices
  Entry Navigation responsibility for accounts payable = > bills > entry > invoices

  Reason 2 = explode on navigation ENTRY you always see the NEW button is disabled, this means
  accounts payable system does not allow the creation of individual bills, you must create only in batch mode.
  Check the value of the profile option ' AP: use invoice batch commands. If the value is YES, it is intentional that NEW button is disabled...

  Reason 3 = you use Navigation entry, your responsibility is not enabled for lots of bills
  The Bill create function could have been excluded from the responsibility...

  Kind regards
  Ivruksha

• How can I activate the internal microphone in vista

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Click with the right button on the speaker near clock - recorders - right-click in the box - check
  Show disconnected devices and display devices disabled - check your micro-
  Turn highlight them and then on lower right properties. To ensure that the injector is appropriate
  is enabled and check the other settings - tab levels make you MUTE is disabled
  and APPLY / OK to change.

  Check with type Sound Recorder - Start - in the-> Sound Recorder search box found at the top of
  list - click on - RUN AS ADMIN

  ---------------------------------------------

  If necessary:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version.
  Now click on update drivers who cannot do anything as long as MS is far behind the certification of drivers.
  Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest drivers Audio/Sound - download - SAVE-
  go to where you put them - just right-click on Reboot - RUN AS ADMIN-

  Check the Version on the tab of the driver in the device as often audio drivers Manager
  restoration and then finally install the latest version. Restart and check post
  each test, not uncommon to have to run the pilot of 1 to 4 times or more. Just do
  of course, the version you have installed appears in the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right-click in the box - check
  Show disconnected devices and display devices disabled - check your micro-
  Turn highlight them and then on lower right properties. To ensure that the injector is appropriate
  is enabled and check the other settings - tab levels make you MUTE is disabled
  and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver).
  Mine's Manager Audio RealTek, your DD can be entirely different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• How to activate the rotation on the Windows Photo Viewer buttons?

  Original title: Rotation buttons

  How to activate the rotation on the Windows Photo Viewer buttons?

  Do you mean that the spin button is disable as if gray/disappear?

• How do I activate the Distribution button in the Transaction of material

  Hi all
  
  I created my new responsibility in Oracle EBS R12, in which no. function attached to the menu (SCM) when I check the Transaction material screen Distribution button is off here, but when I use only priority responsibility it's activate guide please how can I activate the dispensing button or by selecting a profile for my responsibility or others.
  
  Thank you

  Hello

  -See - dispensing button on find significant operations in Wip will lights up not (Doc ID 565501.1)

• How to use the prtsc button please, so I can capture Bank to receive the shipment?

  How to use the prtsc button please, so I can capture Bank to receive the shipment?

  If you can view receipts from the Bank to the screen... just left
  Click on your print screen button to copy the screen of your
  Windows Clipboard. Then... Open Windows Paint and
  Reach... Editing / paste. Then go to... File / save as / JPEG.

  If the file needs cropping... you can use the 'Fix' edition
  option in the Windows Photo Gallery.

  Another option:

  If you run any version of Vista Basic...
  the capture tool can be a better tool for the job:

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  (Vista Home Premium, Business, Ultimate, Enterprise)

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• r204tx: how to activate the deletion warning on hp computer laptop r204tx

  Hi all!

  Recently I bought hp laptop r204tx with Win. 8.1 - 64 bit, however, whenever I want to delete any file, folder, etc. I press the button Delete and deletes directly without any warning or alert!

  Please, help me to solve this problem and enable the alert message for the delete option...

  Thanks in advance!

  How to activate the Confirmation alert delete:

  http://www.askvg.com/how-to-enable-delete-confirmation-dialog-box-in-Windows-8/

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• How to activate the Sleep function to put the computer to sleep if a program is open?

  I have Windows Vista basic on a desktop Dell 530.  I found that if I have a program or application running (such as I-tunes or windows media player) then the Sleep function will not put the computer to sleep.  How to activate the Sleep function to replace these programs and put the computer to sleep?

  Note: This is how it was with windows XP, the Sleep function would put the computer to sleep no matter what was running, he was reliable, if you left the computer and I forgot that you had something running.

  Thanks for your help.

  Hi kevino4130,

  If you disable sharing on your computer (not only the power settings) of media, it should allow him to enter the mode 'sleep'.

  See if that does not solve your problem and let us know.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.