How to add a report column to an existing page?
Hello friends of the Apex,On a page "Form on a table with report" created with the wizard, I want to add a new column to the report in the underlying table (this is the page of several row). If I try to add the name of the column in the query, Apex says:
"You have asked to change the interactive report query. If you have added the column to the query, they will not display when the report is run. You should not use the menu actions and select columns or click Reset. If you have removed all the columns in the query, it will disable existing filters, highlight of rules and other report parameters that references the columns. Please confirm your request. »
Of course, I don't want to not start over and re - build the page, where the hell is so this menu "actions"?
I'm under Apex 4.1.
Thank you very much
Kim
Hi Kim2012,
Run your page and then on your report interactive, there are the search at the top of your report bar, there is a drop down menu Actions . Go to Actions-> Select columns.
Select column has two pane .one is not displayed again are set out in the report.
Newly added columns do not display the component, please move this column to the other side that is in view in the report pane.
For more information on interactive reports, see the bottom of doc
http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/IRRs-083031.html
Hope this helps you.
Kind regards
Jitendra
Tags: Database
Similar Questions
-
How to add a new column to an existing item to an arraycollection collection?
Hello
I have a collection of arraycollection, acLeaseContract, which has this structure:
These are the columns and their respective data I get from main system. Now, I would like to add 2 more columns, after TenantName.
I can iterate through this collection arraycollection, creating an object, add all columns again to the new object, and also add new columns that I want to add and then add that object to the arraycollection collection.
for (i = 0; i < acLeaseContract.length; i ++) {}
var o: Object = new Object();
o.ContNo = acLeaseContract [i]. ContNo;
o.ContType = acLeaseContract [i]. ContType;
o.EndDt = acLeaseContract [i]. EndDt;
.
.
.
.
o.TenantName = acLeaseContract [i]. TenantName;
o.MyNewColumn1 = "somevalue";
o.MyNewColumn2 = "somevalue";
acLeaseContract.addItemAt (o, i);
}
But I think it's very painful and long, because we re building the collection whole arraycollection once again, just to add a couple of more columns.
Is there a clever way to update the collection arraycollection with new entries, if yes can you pls tell me how can this be achieved?
Thanks for your help...
-Deepak
Hello Deepak,
Try to use the ObjectUtil.copy method. This will create a complete copy of your object as:
var tempArray:Array = ObjectUtil.copy (acLeaseContract.source) in the table;
acLeaseContract = new ArrayCollection (tempArray);
You will avoid your iteration for simply copy your arrayCollection collection deeply.
Now, when you look at acLeaseContract it will all contain the dataStructure as an object. Now, you are free to add any number of column to any node.
Hope this helps you.
See you soon
-Vikash
-
How to add the new column in existing table to our desired location?
How to add the new column in existing table to our desired location?
For example, I have to add the new column 'course' before the salary column in the emp table.
I think the best way is to add the column at the end of the table and create a new view with the order of the columns...
Another option...
places the data into a temporary table and recreate the table with the correct order of the columns, and then insert data to the table from the temporary table
Refer
Add column (from table) in the desired position
Example:
CREATE TABLE temp_my_user LIKE)
SELECT * FROM password);
DROP TABLE password;
(Password) CREATE TABLE
userID NUMBER
, first name VARCAHR2 (25)
, middleInitial VARCHAR2 (1)
(, name VARCHAR2 (25));
INSERT INTO password (userID, firstName, lastName)
(SELECT username
first name
lastName
OF temp_my_user);
DROP TABLE temp_user;
-
How to add the new column in the tabular layout editor in Oracle Forms
Hello
I need to add the new column to a datablock and display the newly added column in the form. What are the steps I need to follow.
1. I chose the new column from the view to the datablock.
2. Add the text element in the layout editor. But this position is not correct. It overlaps with another column. How to add the new column to the layout editor?
Thank you
HCIn the layout editor, you can simply drag the fields so that they do not overlap.
See http://www.youtube.com/watch?v=7emNa7THMLgSandeep Gandhi
-
How to add the new column to a specific position
Hello
My table looks like Fallows.
Select * from company
PRODUCT_ID COMPANY_ID COMPANY_SHORT_NAME COMPANY_LONG_NAME 1 1001 An Inc. Long name A Inc. 1 1002 B Inc. Long name B Inc. 1 1003 C Inc. Long name C Inc. 2 1004 D Inc. Long name D Inc. 2 1005 E Inc. Long name E Inc. 2 1006 F Inc. Long name F Inc. My requirement is I would LIKE to add A NEW COLUMN AS COMPANY_LOCATION NEXT TO COMPANY_SHORT_NAME
How to get there.
I tried like Fallows alter company table add company_location varchar2 (100) after company_short_name;
but this query shows the error
ORA-01735: invalid option of ALTER TABLE
If the query I've tried is correct?
Give me your suggestions.
Thanks in advance.
As long as you're on 11 GR 2 or lower, it will not work.
There is no Clause "AFTER"in the alter table do not add column."
You have the chance to use dbms_redefinition (when no interruption of service is possible) or manually create a new table with the columns in the order you need and then migrate the data and then drop the original and rename a new.
In case you are already on 12 c, you have a chance to add the column to the end and then make visible columns and invisible status in the right order. This way your column will get to the position that you want it to be.
Kind regards
Carsten
-
How to add new physical columns in the physical layer
Hi gurus,
We had a size and a few new columns are added in these Dimensions, how to define these columns, these columns are available in the database how to add these columns in the tables.
Thanks in advance
Vincent
Make a right-click on the Dimension table-> new item-> physical column-> give the name that you have in DB and data type-> save the RPD and check the number of updated rows.
It will work.
Thank you
prassu
-
How controll in the report column width?
Dear all,
I created the classic report, but here the column width is too large.
I want to the column width of the control in the report.
How can I do this...
Thank youI use Apex 3.2.
It's a shame. Just try to change:
Report--> Column--> column formatting attribute--> Style CSS
for width: 100px
Also make sure that your text to column heading to enough short to fit into the column.
Rod West
-
How to refresh a report column value alone.
Hi all
If we have a static report for one of the columns in the report, I need to give a characteristic click and a pop-up window will appear and there is a checkbox to select values on this popup page and finally after making changes and I press on apply changes, it must close the popup window and then come and change the value of this column only in an original report to the instead of refreshing the whole page.
The report column is of type 'Standard report column.
How can I get this feature?
Thank you and best regards,
Vikas
Published by: Vikas Krishna on September 29, 2009 21:47Vikas,
I slightly modified on of my examples alumni and you will find everything here:
http://Apex.Oracle.com/pls/OTN/f?p=31517:241
Denes Kubicek
------------------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
------------------------------------------------------------------------------ -
How to 'Style' a report column onClick
I have a report and a column is a link. When the user clicks on this link in the column, I display a report corresponding to the value of the column in the area below. How highlight or the particular column whose report figure of speech? any ideas are appreciated.
Thanks for your help,
SuryaSurya,
OK, I've updated the application to give you an idea of how it could be done. Do, I'll tell you that's not the best. You should really be seized off the coast of the ID of the user, not the name. This would mean that you would need to have another element hidden with the ID. Then I rewrite the code to be a bit more specific on the line to report selector. In addition, you will need to hit all the td elements in the line...
Kind regards
Danhttp://danielmcghan.us
http://sourceforge.NET/projects/tapigen -
SQL query on how to add a new column to display the result
Select emp_code, < new column = 0 >
from employee_table where < < condition > >
syntax to add the new column?
Published by: user9027633 on March 4, 2010 02:53user9027633 wrote:
Select emp_code,
from employee_table where> syntax to add the new column?
Published by: user9027633 on March 4, 2010 02:53
Want you like this
selec emp_code, 0 new_column from employee_table
-
report column link to different pages
Hi all
I have a problem now.
I have a ratio r:
LEVEL NAME ID
1 STUDENT
2B TEACHER
3 C STUDENT
4 D ADMIN
5 E TEACHER
...
I want to 'LEVEL' column link to different pages. Once I click on "STUDENT"-> page 1, "PROFESSOR"-> page 2, "ADMIN"-> page 3.
For example, when I click on the first line of "STUDENT", then I jump to page 1. And when I click on the second row 'TEACHER', jump to page 2.
I don't know if I clearly expresses, but I need your help!
lila820 wrote:
I don't know if I clearly expresses
Lol see Re: how to get the answers from the forum for how to do it. In particular, always specify if a 'report' is a standard report, interactive report or a tabular presentation.
I have a problem now.
I have a ratio r:
LEVEL NAME ID
1 STUDENT
2B TEACHER
3 C STUDENT
4 D ADMIN
5 E TEACHER
...
I want to 'LEVEL' column link to different pages. Once I click on "STUDENT"--> page1, page2--> 'TEACHER', 'ADMIN'--> page3.
For example, when I click on the first line of "STUDENT", then I jump to page 1. And when I click on the second row 'TEACHER', jump to page 2.
A less obvious but simple way to do this is to specify the alias page for pages 1, 2 and 3 as a STUDENT, TEACHER and ADMINISTRATOR respectively. Then set the link Page column property to the #LEVEL # column string substitution to pick up the LEVEL of report column page alias. This approach has a better separation of concerns because it eliminates the generation of HTML code of the application and in this case even does not require the addition of any column in the report. (And I strongly recommend that you do not level use as is an Oracle reserved word as an identifier.)
-
How to add and print two photos on one page
I want to print 2 pictures on a paper, but I can't understand how to add the other picture on the page. Someone knows or could tell me how to add a second picture page?
Thank you.
Dustin-
Hello
What operating system do you use?
Refer the article to print multiple images on a single page.
3 Tips for printing digital photos at home
http://www.Microsoft.com/athome/Morefun/photoprinting.mspx
Working with digital images
http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures (this item can also be used for windows vista) -
How to add cut marks bleeding from an existing PDF?
Hi, I have a PDF of a book (200 pages) that I need to add traces of cutting, offset print color bars.
May not know how to open the PDF file in Acrobat and adds the marks bleeding.
The PDF file was saved in Word.
Please advise...
The crop, bleed and trim boxes are all the same size. The collection area is defined in the culture dish (choose Tools > Print Production > Set of Page boxes). If the illustration contains a bleed, make sure the culture box is large enough to accommodate the substantive area lost and other printing marks.
Once this is done, please follow the steps to integrate the printer marks in PDF format
Choose Tools > print > add printing marks.
Specify the pages on occasion.
Specify the parameters and brands.
Thank you
-
How to add a logic unit with an existing data store number
I have a logic unit number I replicated from a SAN at a data center in a SAN to another data center. I want to map this LUN to a cluster of ESX 4 and use the store of existing data on the LUN to recover the virtual machines it contains. What is the best way to do it? Guests will see the existing data store, when I rescan HBAS or y at - it a trick to add a data store existing cluster?
It's a separate LUN on a different SAN mapped to another set of hosts. Once I have a new analysis for the new LUNS and data warehouses, store data on this LUN will display in the list of data stores to then browse data warehouses and register virtual machines on it? Or still do I add storage and first select the existing data store?
Given that the hosts did not see the original LUN before, the data store should appear just after the new analysis.
André
-
How could put editable report column as read only based on the other domain
Hello world
I'm new to APEX. I have a modifiable tabular report (SQL query). When I choose the column (which is a selection list) of a certain value, I want column B to be read-only (depending on the result of an another SQL described below). It doesn't seem to be a READ ONLY section in the type of tabular report where I could put my SQL condition.
In other words, "column B" must be read only based on SQL returning following true or Exists:
Thus, to determine if column B is ready only, I need the following logic:
SELECT 'x '.
of tab1
where key = (value of column A)
and the flag = "Y".
Any help would be greatly appreciated!
Thank you
FrançoisYou can only do so if your tabular presentation is a manually created. In this example, it shows how to set this property:
http://Apex.Oracle.com/pls/OTN/f?p=31517:170
You can use a case statement to set this property for specific lines.
SELECT empno, CASE WHEN ename LIKE 'A%' THEN apex_item.text (34, job, 80, 100, 'style="width:170px" readonly="readonly"', 'f34_' || '#ROWNUM#' ) ELSE apex_item.text (34, job, 80, 100, 'style="width:170px"', 'f34_' || '#ROWNUM#' ) END job FROM emp
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
-------------------------------------------------------------------
Maybe you are looking for
-
Audio & video controls on Satellite A50
Hi all Anyone got any ideas how to get the audio/video controls to work on my satellite A50? They do not seem to work with any of my media players i.e. wmp10, nero, power dvd... Anyone got an idea as to this driver, I need to make them work. P.S.: Th
-
ThinkCentre M52 8115-KUF CPU upgrade to Pentium D 820
I just upgraded my CPU from the P4 630 HT 3 GHz for the P4 D 820 and had no trouble from it upward after replacement of CPU, but it records only 1.50 GHz in the Task Manager performance page, although it is still in the custody of P4 630. It should a
-
HP Pavilion g6-2249wm Notebook: RAM upgrade question
When I ordered my laptop a few years, there is, it came with 4 GB of RAM standard, but you could spend up to a maximum of 8 GB to 6 GB. I bought it with 6 GB. I want to move to 8 GB, and I know there are 2 RAM slots in the laptop. My question is, did
-
An external analysis lambasted that I have an open port. For security reasons, I want to close it. How can I go about it. I don't know the port number.
-
set up of IE9 beta now the microsoft security essentials does not start
After you have configured the security to explore 9 beta essintials program says that somethings not allowing this procedure which would cause this im running windows 7 home premium * E-mail address is removed from the privacy *.