How to add map of SCSI tape drive to Hyper - v 2012

Similar Questions

• How to find the host ESX 4.1 SCSI tape drive card information...

  Dear team,

  last night we have installed card scsi tape drive on one of the host to ESX 4.1, just want to know how to find the details of scsi card in ESX 4.1 host, is possible to find via cli or hardware status tab?

  need help on the same.

  concerning

  Mr. VMware

  Hello

  You should find the information you are looking for by entering the following command.

  less/proc/scsi/aic79xx/6

  Kind regards

  Ralf

• Through host SCSI tape drive to the virtual computer with the backup software installed in the comments

  Can I attach an external SCSI tape drive to one of my hosts, and then add it as a device in a virtual machine.

  I want to use backup exec on a virtual machine, rather than having to have a separate physical server to attach the tape drive. I realize that I wouln't be able to vmotion the guest but as its only going to be a backup machine I am happy with that.

  Thanks in advance,

  Yes is possible.

  I have a Dell TL2000 with a dedicated SAS card and it works (not faster than in a real environment, but works).

  You add the SCSI ID of the tape (and the library, if any) to the virtual machine.

  Or, if your hardware can he take charge, using VMDirectPath and give the card on the virtual computer.

  André

• PowerEdge R415 - external SCSI tape drive?

  I was looking through the updates available for the R415 find a scsi interface card. I do not see an extra, but was hoping someone could point me to a compatible card. It is necessary to connect to scsi tape drives.

  Oly_R,

  The adapter you need is the LSI 2032. As long as found on page 9 of the R415 technical guide - http://www.dell.com/downloads/global/products/misc/r415_tech_guide_11_18_10_final.pdf

  The LSI2032 part number is NU947.

  Let me know if that answers your question.

• Cannot add the SCSi tape drive

  Hi all

  Im trying to add my HP tape drive to a virtual CentOS computer.

  When I add in the properties of the VM I get the following error:

  Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3

  I found this article which seems to be my answer, but I do not have a .vmx file to edit in ESX 3.5.

  http://communities.vmware.com/thread/199408

  VMware Infrastructure Client

  1. "Configuration" - & gt; 'Storage' - & gt; Select target storage

  2. Please download * target VM *.vmx

  Edit the vmx file

  1. Edit *.vmx (wordpad, etc...)
     (Front)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0:0. "
     scsi0:1.allowGuestConnectionControl = "false".
     (After)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0.
     scsi0:1.allowGuestConnectionControl = "false".

  2. Download * *.vmx

  VMware Infrastructure Client

  ' Power On ' target VM

  One got the job?

  Thank you

  G

  but I do not have a .vmx file to edit in ESX 3.5.

  You must have a file for each virtual computer vmx.

  See: / vmfs/volumes/DatastoreName/VMname.

  André

• How to add space to the D: drive while extend space is dimm

  After the installation of cleaning that had become indispensable, although my computer, seams now healthy but his unit became full and forthcoming, not only with repeated messages of "Space bass", but also various errors, here and there.

  Among the choices, to increase its space, I chose to increase or remove files to D:. In doing so, I comfortably shrunk C: by 1.25 GB. But the BIG problem is that there is NO way to add this on the D: drive.

  The commands and options in disk management are therefore very obscure and non-understable that, after 10 days of fighting, I'll have to come to your aid. Please do something as you can so that I can add the space unallocated with my D: drive. Otherwise I'm in big trouble; no updates to come; No downloads are possible. I'm sitting with meaningless fight and nothing else.

  my email: * address email is removed from the privacy * 17 October 2012

  Hello

  You can't do what you want to do using the disk of Vista management.

  You can't take a little off-C: and nail it on D:

  And are you sure that D: is not your recovery Partition to reinstall the operating system.

  If it is read this:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not the recovery Partition, Vista for you options to > save data on D: > D: delete > C: extend into the now unallocated space where D: is.

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  See you soon.

• How to connect the SCSI tape drive to comments

  New user of VMWare here - I like it so far.  In any case, I have a LTO3 SCSI drive, I would like to use with one of our virtual machines running on our host ESXi 4.1.  I installed a LSI 53 c 1030 SCSI HBA, appearing on the HW compatibility list.  The drive is an HP Ultrium 920 LTO3.  I use BackupExec 12.5 x 64 on the VM (Win2K8 R2 x 64).

  I can't find clear instructions for setting this up in ESXi.  Nothing in the implementation or the Config Guide.  I'm not if I use passthrough or without passthrough, etc..  Can someone tell me the good documentation on how to get this set up and work or by post simple steps to get the virtual machine, see the HBA/drive?

  TIA

  Hello

  If you had plugged the band to the HBA and then restarted the server, you can go to your virtual machine, and then change the settings and in the Hardware tab, add hardware.

  Go to SCSI devices and add the tape to the virtual machine.

  In other words, if your hardware supports, enable passthrough for the host HBA, in configuration, settings in advance.

  Then reboot and go to the settings of the virtual machine, adding hardware and click on PCI device, add the HBA to this virtual machine.

• How to add multiple photos to iCloud drive?

  L.S.

  I want to use iCloud drive to share some of my photos with my mother. I used Dropbox for that so far, but now that I have the upgrade to 50 GB of storage iCloud, which seems the best choice.

  However, unlike Dropbox seems only able to select one photo at a time for iCloud Drive (Photos > select > add to iCloud by car). Am I missing something here?

  With sincere friendships.

  Repelstale

  First, iCloud drive is different from your photo library from iCloud, and your photos are stored in the second, not the first.

  I think what you're looking for is - iCloud, sharing photos - Apple Support

• Collection of virtual device SCSI for tape drive node

  When you add a SCSI device such as a SCSI tape drive internal to a particular Windows VM, regardless of which node to virtual device I choose?

  This virtual Windows machine has two SCSI drives:

  -SCSI (0:0) hard drive 1

  -SCSI (0:1) hard disk 2

  Can I put the tape on SCSI drive (0:2)?

  Thank you

  Hello

  Choose a secondary controller and the SCSI ID of the device. If it is a SCSI ID 4 use something like 1:4. It's "best practice".

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  URL = http://www.virtualizationpractice.com Virtualization practice analyst [url]
  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links |
  [url =http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast] virtualization Security Table round Podcast [url]

• Write backup directly to a tape drive - how?

  Then... connected on one of our hosts ESX is a scsi tape drive.

  A VCB based a host file-level backup works terribly slow (400 - 500 MB/min) and an agent based at the level of the backup files works licensing costs (although it is much faster to nearly 3 GB / min... same servers).

  I read that it is possible to output a right TAR tape... without any sort of proxy backup software.

  I know VERY little of Unix systems... If I wanted to schedule a task of all night for all my virtual machines TAR, how would I go to do?

  The process that I realized it would be to create a script that:

  (1) get the tape drive (whenever I try to "climb" I get the error that it is not a block device)

  (2) Flash virtual machine

  (3) creates an archive of said machine virtual (I think that's what they're called?) with the output piped in the tape drive

  (4) the virtual machine unsnapshot

  (5) remove the tape drive (or go back to step 2 and repeat with another virtual machine)

  Hello

  In the penultimate chapter of the book, VMware ESX Server in the enterprise is such a script. So yes it is possible. I did it several times. I think I have a separate backup/VCB proxy server would be much more effective for you. You can then use existing free and fresh backup tools to provide a backup solution. See http://vmprofessional.com/index.php?content=esx3backups for a comparison of the tools. With compression you have much more space on the backup host to...

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• Are there files in some tape drives?

  DB version: 11.2
  OPERATING SYSTEM: AIX
  MML: Symantec Netbackup 7.1
  
  I worked only with front based disc backups.
  
  My question is not specific to Netbackup. I just want to know how if there are directories in tape drives? Or does a wholesale directory where all the backup files are stored?
  
  After you have configured netbackup, if I run the script below
  

  RUN
  {
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE';
  SEND 'NB_ORA_CLIENT=emprd218, NB_ORA_SERV=hewmast193'; 
  BACKUP DATABASE; 
  sql 'alter system archive log current'; 
  RELEASE CHANNEL ch00; 
  
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE'; 
  SEND 'NB_ORA_CLIENT=emprd218, NB_ORA_SERV=hewmast193'; 
  BACKUP ARCHIVELOG ALL ; 
  RELEASE CHANNEL ch00; 
  } 

  In which directory in band will be stored all these backups?
  
  If it was from disk, from the FORMAT parameter, I knew where all the backupfiles are stored.

  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u04/backup/ora_df%t_s%s_s%p';

  Greenish salvation,

  I just want to know how if there are directories in tape drives?

  There is no inventory on the tape. Ribbon tape and disk is disk. (But to be honest, a tape backup can be used to restore files and directory structures).
  Make direct backups to tape you can use:

  BACKUP DATABASE FORMAT "ora_df % t_s %%p s_s.

  Backup will software an internal ranking system is in service a restoration of the channel.
  Kind regards
  Tycho

• How to use the SDLT tape drive in the guest OS VM

  Dear

  now, I have HP DL380 G5 Server running windows 2003 Ent. with bus adapter host SC11xe PCI - E HP which directly connected tp SDLT Tape Drive as backup server and use for the backup operation.

  I want to move the physical backup to host vmware server and EMC AX4 allows you to have a backup online and allows you to take backup offline, SDLT tape drive

  My question is how I use the SDLT tape drive in guest OS vm and vmware knows "HP PCI - E SC11xe Host bus adapter" or not.

  Please let me know how to do this.

  Kind regards

  Mahdi Bellavia

  I have a G5 DL385 (AMD of the DL380 version) with a DLT3.   I use an Adaptec 29320LPE, appearing on the compatibility list.  We plugged a HP Ultrium 920 changer using the 'old method' SCSI passthrough.  We bought the Adaptec card, because we used initially ESX3.5.  We are now on ESX4.0, but for various reasons, the configuration left the same, so I have not tried with VMDirectPath I don't know if it is possible to use the SC11ex card, but if you arrive VMDirectPath at work, it seems then you need another SCSI card.

• How to add files nd another thing in icloud drive?

  How to add files and other things in icloud drive?

  For Add some new files, just start a new document using an iCloud- enabled app on your iOS device. And on your Mac under OS X Yosemite or later, or your PC running Windows 7 or a later version, you can just drag files to the iCloud drive folder. Everything automatically - updated on all your devices.

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• Aspire T3 - 710 how to add Second hard drive?

  I see only two SATA sockets on the motherboard and one for the DVD and one for the hard drive.

  How can I add a second internal hard drive? Do I have to buy a PCI card with a SATA plug?

  One last comment. The motherboard did not include one towards down the memory of the solid state of m2. I would have appreciated such a screw.