How to adjust an image to the size of photo paper to print without white borders

Similar Questions

• How can I place several smaller images of varying size on one page for printing without losing the original size.  Board contact option to resize my pictures

  Does anyone know how to place several small pictures on a single page, so I can print them out as a rather print over and over again.  I want to maintain the original size of the images that vary somewhat.  I tried to use the option of the Board-contact, but he seems to want to resize my images which unfortunately is of no use to me.  I tried to cut and paste on a new page, but I don't think that it is now the original size.

  Alternative applications sometimes can provide quick and easy results.

  It might be interesting to download the demo version of Photoline: it includes a simple Board-contact option that allows for images to be included without loss of resolution, i.e. the original is left intact and the proportions remain unchanged. Since Photoline also supports documents several pages, all the thumbnails are collected into rows and columns, the user can control and the end result can be exported as PDF.

  -Download the trial of pl32.com

  -Open Photoline, then open the browser (CTRL/CMD (B)

  -Navigate to your folder with the images you want to combine for printing.

  -right mouse click in the thumbnail view, and then select "Create image Catalog.

  -Select the page by Page size

  -under 'Size' define the number of rows and columns (there are here a translation error: "Spalten (COL) / rows (lines)".)

  -Uncheck "scale photos physically." This ensures that the original images are intact and incorporated in full resolution.

  And then click OK.

  Some of the other testing devices until you get a satisfactory result. Then export it to PDF.

• I need to create my images twice the size in pixels on a Retina display?

  Hello!

  I stole this question to this thread: adobe photoshop - should I create my images twice the size in pixels on a retina display?-Graphic Design Stac...

  I read it over and over again, and I'm still confused. Maybe someone here would be able to explain it better?

  I don't have a computer screen Retina, but if I had one, I wonder how I would design my sites...

  I understand the concept of double the size of the images to view the retina when designing on a computer that has a standard screen.

  But according to the thread mentioned above, the same rule applies when designing on a computer screen Retina.

  How can this be?

  It's so confusing!

  Thanks again!

  Chris.

  As web design is concerned, there no difference in the design of the image on one retina screen, another that they can appear a little less sharp compared to a standard screen. You really just need to focus on the pixel dimensions.

  David

  Creative muse

• How can I activate images on the DVD in video file so that I can edit and send to people?

  Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

  Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

  Thank you!

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is in, and then select or open Explorer.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.
  (if you have Vista Home Premium or Ultimate, you)
  may be able to import the VOB files in Movie Maker
  as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How to save an image in the body of an email?

  How to save an image in the body of an email? All I get is exemplary, not save as.

  How to save an image in the body of an email? All I get is exemplary, not save as.

  ===========================================
  Take a look at the following articles:

  Open or save an attachment in Windows Mail
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-or-save-an-attachment-in-Windows-Mail

  Parts attached email Windows Live Mail - open and save
  http://www.webdevelopersnotes.com/tips/windows_live_mail/windows_live_mail_attachments_open_save.php

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  I can't save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  Hello

  Included with Windows Notepad text editor allows you to configure the layout including headers, footers and margins. These options are normally not saved between sessions, but with this Notepad tweak can be done to save the changes. Please try this method and answer us.

  Open your registry database and find or create the key below.

  A. go to start and regedit and press ENTER.

  B. HKEY_CURRENT_USER\Software\Microsoft\Notepad

  C. create a new DWORD value called "fSavePageSettings" and there the value '1' to save the settings page.
  D. create a new DWORD value called "fSaveWindowPositions" and it "1" to record the position of the window.
  E. restart Windows for the change to take effect.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

• How can I extract images of the application "Photos of Macintosh" in the Lightroom?

  How can I extract images of the application "Photos of Macintosh" in the Lightroom?

  I know, but it must be on the hard disk, to retrieve an individual photo appears

  be a daunting task... Need help...

  See you soon

  In Photos, select all the photos you want to put in LR; Select "Export" in the file menu and export to a new folder on your hard drive.  Finally in Lightroom, import pictures into this new folder.

• How to disappear an image of the layer from left to right to display gradually the image below, that is solid on the left to slide to the right?

  How to disappear an image of the layer from left to right to display gradually the image below, that is solid on the left to slide to the right?

  No need to clarify, Mark. Thank you very much

• How can I insert image into the image in adobe first pro cc 2015

  How can I insert image into the image in adobe first pro cc 2015. I want to put a fixed image on a video sequence as a pip.

  1 import the photo into your project (CTL-I or just drag & drop in the project Panel)

  2 dag photo imported on your timeline in a track located above the video you already have.

  3. click the clip of the photo in the timeline panel and then click on the control panel of the effect of the Source Panel tab.

  4. here you can resize, move, and even rotate the picture of the "query" fixed effect.  You can use the sliders or click on the area next to the word "Query" and use your mouse to do everything from the program Panel.

  Good luck and have fun.  BTW: once you get it you like, you can even animate the PIP to fly in or any other movement, you can think of with keyframes.

• Photoshop 7 (Windows 10), when you select the size of the Image or the size of the canvas, now crashes

  Photoshop 7 (Windows 10), when you select the size of the Image or the size of the canvas, he now is suspended and does not bring the selector upwards.

  It works fine, but I suspect that some Win 10 update in the last couple days has skewed anything. Any ideas?

  I know it of old, but even after the upgrade to Windows 10 4 weeks, Photoshop 7 installed always OK, so I'm happy with it.

  It worked until yesterday.

  I could start by resetting the photoshop preferences file and see if that solves the problem.

  Press on and hold Shift + Ctrl + Alt just after the beginning of the launch of photoshop 7

  (you have to be fast while pressing down or you won't get the dialog box)

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes

  
  

  
  

  

  
  

  
  

  
  

  Also, if you have not applied the update of photoshop 7.0.1 you should do the same.

  
  

  Adobe - Photoshop: For Windows: Adobe Photoshop 7.0.1 update

• How can I insert images in the submenus in the navigation bar?

  You guys,.

  I wonder how the submenus in the navigation bar of the site Internet was done. Anyone know how I can add images in the form of sub menus? Here is the site: http://cliffsliving.com/

  Thanks a bunch

  Hello

  You can do this by using Tooltip composition in the library of Widgets under 'Compositions '.

  You must review and design trigger in the top menu and the target than the submenus, and you can add the text and pictures in there.

  Concerning

  Vivek

• How to duplicate an image on the main screen so that I can edit and compare the result with the original?

  12 elements how to duplicate an image on the screen (as well as the photo tray) so that I can compare any edition with the original?

  1. In the full Editor, go to Edition > Preferences > general and check "enable floating Documents in full Edit Mode".
  2. Open the image so that you can see in the project bin
  3. Right-click in the thumbnail of the image in the project bin and doubles. It will come as a xxxcopy
  4. On the icon to reorganize at the top, select 2-top. You should see the original and the duplicate in the work area

• How to display multiple images at the same time in CS6?

  How to display multiple images at the same time in CS6?

  Hello

  If you go to window > reorganize you can choose from several display options. Below, I have chosen two horizontal spaces since I have two images, but you can select other options if you have more than one image.

  

• Tool: how to choose an image inside the image area that is out of reach

  Tool: how to choose an image inside the image area that is out of reach?

  See the photo below reference.

  How to move the image inside a box that lies beyond the visible area? (The bottom box)

  When you click the image, you can't get the contour or more unless the image area is expanded to include the hidden area.

  Am I missing something? Thanks for the help.

  Vannon

  

  You can move the object back in the frame by clicking on the button "Content Center" to the right (this is located in your toolbar at the top).

  

  Or you can use the arrows on your keyboard to move it as well.

• How to get Firefox to ignore the status of liaison visits when printing?

  How to get Firefox to ignore the status of liaison visits when printing?

  When I print something, visited links are a different color than unvisited links.
  Is there a way to make the color even when printing?
  (without changing the story, or how things look on the screen)

  If there isn't a way to do that, how about this by adding as a feature?

  One way to do would be to create style rules customized for the printed output that hardcode the link colors for all of the printed output. Firefox supports two ways to proceed: a file userContent.css that you create in the folder settings, and a custom stylesheet applied using the Stylish extension.

  However, 'one size fits all' could lead to unreadable results or ugly on some pages. If an add-on that can do adaptive way would be better. I do not know if someone has created a.

  For sites that do not require a login and that are not personalized, you could launch the page in a private window (right click on the link > open in a new private window or copy the URL and then Ctrl + Shift + p, then paste it in the address bar and enter). Because private windows have their own history, the print should not reflect the history of your regular windows.