How to align the second line of text

Similar Questions

• How to recover the second line of a table

  Hello
  
  Could someone let me know how to recover the second line of a table without using the coumn the names of columns in the table.
  
  By default the table EMP or used in the case of scott connection can be used as an example of table.
  
  
  Concerning

  select e.* from(
  select e.*,  rownum rn from emp e)e
  where e.rn =2
  

  did you expect that?

• How to get the second line in an indented bulleted list...

  Hello

  I understand how to get flea and list numbering, and I added numbers to a list that will be used (although the content will be replaced) on about a hundred pages of my cookbook.  Many numbered tickets are just a single line, but some entries are two or three lines, and in these cases, the text begins on the left directly under the number on it - I prefer the second and third lines of text to start directly under the text in the above numbered line.  In which case I'm not explain correctly, here is a small screenshot (it comes through hope):

  

  Did someone mind telling me how to solve this problem?

  Thank you very much

  Malcolm

  Can you show a screenshot with the same panels open screen I've had, and the selected numbered text?

  Also, I should have mentioned that to move just down half of the arrow on the tab of the Panel, you must hold down the SHIFT key at the same time.

• How to fix the missing lines of text and formatting lost, hyphenated words and text disturbed flow, after the conversion of PDF in word doc to allow editing? using WPS office application on Android Galaxy tablet. tried Polaris app and got a blank document

  How to fix the missing text and updated lines shaped, hyphenated words and patterns disrupted, lost after export PDF document to word doc to allow editing? using WPS office application on Android Galaxy tablet. tried Polaris app and got a blank document.

  Thank you!

  Hi Spider,

  Adobe Acrobat on mobile devices can be used for editing. I will suggest you to perform the task on PC or Mac.

  Thank you

  Abhishek

• JavaScript to extract the second line only a field of text as a PDF?  Is this possible?

  I have a PDF form created in Acrobat DC.  One of the fields is a for the name and address multi line text field.  The user between that info with carriage returns in a field named the plaintiff that ends in a format such as:

  Name

  Mailing address

  City, State Zip

  I need to extract JUST the second line of this field to complete another field of text with these data.  So, my second text field called StreetAddress and would automatically extract only the second input line in the text field named candidate.

  Is it still possible?  If so, can someone give me an example of how this can be accomplished?  I don't want to ask the applicant to each line of input in separate fields.

  Of course, it is possible. Use this code as the "StreetAddress": custom calculation script

  var fullAddress = this.getField("Applicant").valueAsString;
  var lines = fullAddress.split("\r");
  if (lines.length>1) event.value = lines[1];
  else event.value = "";
  

• How to align the text to the right in the text filed using Adobe Acrobat Pro?

  How to align the text to the right in the text filed using Adobe Acrobat Pro? I am able to align the text box, but not the alignment of the text with the deposited text.

  In the Options tab of the field properties dialog box, you can choose left, Center, or right alignment.

• Cannot use spaces at the beginning of the second line of wrapped text

  Hello!

  My question is simple:

  When I got the text inside a text box, and it wraps at the end of the box, why can't put spaces at the beginning of the second line (the wrapped)?

  Because the beginnings of words always wrap to the next line, with spaces accumulate after the word at the end of the previous line.  Any text automatically formatting process skin for it.

  If you want seats at the front, press return first, to force the start of a new line, and then type your spaces.

  -Christmas

• How to set the option for wrapping text in a textfield?

  I want to put the text wrapping to the textfield property. When the text comes to the end and it must appear in the second line of the textfield. How can I achieve this. Please help me for this.

  This should help:
  http://supportforums.BlackBerry.com/T5/Java-development/TextBoxField-revisited/Ta-p/548410

• How to align the position of a node in a pane of the grid using CSS?

  Hello
  
  I have an interface defined in FXML:

  <?xml version="1.0" encoding="UTF-8"?>
  
  <?import java.lang.*?>
  <?import javafx.scene.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  
  <BorderPane xmlns:fx="http://javafx.com/fxml" >
      <center>
          <GridPane alignment="top_center" hgap="8" prefWidth="450" vgap="8" style="-fx-padding: 10;" >
              <styleClass>
                  <String fx:value="form"/>
              </styleClass> 
                      
              <children>
  
                  <Label text="From" GridPane.columnIndex="0" GridPane.rowIndex="0" />
                  <TextField fx:id="from" GridPane.columnIndex="1" GridPane.rowIndex="0"/>
  
                  <Label text="Recipient(s)" GridPane.columnIndex="0" GridPane.rowIndex="1" />
                  <TextField fx:id="recipients" GridPane.columnIndex="1" GridPane.rowIndex="1"/>
                  
                  <Label text="Subject (defaults to title)" GridPane.columnIndex="0" GridPane.rowIndex="2" />
                  <TextField fx:id="subject" GridPane.columnIndex="1" GridPane.rowIndex="2"/>                   
                  
                  <Label text="Send mail as ..." GridPane.columnIndex="0" GridPane.rowIndex="3" />
                  <ListView fx:id="mail_format" prefHeight="100" GridPane.columnIndex="1" GridPane.rowIndex="3" />  
                  
                  <Label text="Plain Text Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="4" />                  
                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="5" />
                  <TextField fx:id="plain_template" GridPane.columnIndex="1" GridPane.rowIndex="5"/>                
                                    
                  <Label text="Send as is (do not dump into plain text)" GridPane.columnIndex="0" GridPane.rowIndex="6" />
                  <CheckBox fx:id="plain_noconvert" GridPane.columnIndex="1" GridPane.rowIndex="6"/>
                  
                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="7" />
                                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="8" />
                  <TextField fx:id="html_template" GridPane.columnIndex="1" GridPane.rowIndex="8"/>               
  
                  <Label text="Other configuration" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="9" />
                  
                  <Label text="Reply-To" GridPane.columnIndex="0" GridPane.rowIndex="10" />
                  <TextField fx:id="reply_tos" GridPane.columnIndex="1" GridPane.rowIndex="10"/>
                  
                  <Label text="Cc" GridPane.columnIndex="0" GridPane.rowIndex="11" />
                  <TextField fx:id="ccs" GridPane.columnIndex="1" GridPane.rowIndex="11"/>
                  
                  <Label text="Bcc" GridPane.columnIndex="0" GridPane.rowIndex="12" />
                  <TextField fx:id="bccs" GridPane.columnIndex="1" GridPane.rowIndex="12"/>
                  
                  <Label text="HTML base (defaults to current server)" GridPane.columnIndex="0" GridPane.rowIndex="13" />
                  <TextField fx:id="html_base" GridPane.columnIndex="1" GridPane.rowIndex="13"/>
                                                                                                                 
                  
              </children>
          </GridPane>
      </center>
  </BorderPane>

  I want to align the labels to right using CSS:

  .form *.label {
    -fx-alignment: right;
    -fx-font-weight: bold;
    -fx-hpos: right;
    -fx-text-alignment: right;
    -fx-text-wrap: true;
  }

  However I have not found any way to align the labels in the GridPane using CSS, or - fx-alignment: right, - fx-node-hpos: right. -fx-hpos: right. -fx-text-alignment: seem to work well...
  
  
  The only way to make it work is to define the attribute of each label Grid.halignment:

                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="right" GridPane.rowIndex="7" />

  But what happens if I want to change that at a later stage-> I need to change this attribute for each node.
  
  
  How can align the labels to right using CSS only?

  Currently CSS in JFX cannot really be used for layout page (or calibration). This is one of those grey areas between what is style (which should be in the CSS) and what is layout (which should be in the FXML). I think I remember Richard mentioning once in a forum or an article that he did not want to add alignment stuff to the CSS at a certain point, but don't quote me on that. You might have a search through Kenai to see if there is a feature request for it and if not add one.

  Perhaps you could it with fake labels stretch to fill the available space in the GridPane. For this, you need to disable the restriction of maximum size (setMaxWidth and setMaxHeight to Integer.MAX_VALUE) and ensure your forced GridPane are such that the label will fill the cell. Once you have a stretched label alignment will come into play as the text is aligned relative to the area of the label (as opposed to a manager that aligns the entire label compared to its parent). I think that put a border on the label when debugging to work on what's going on.

  Another less confined but more flexible alternative might be to use variables in your FXML files. You can do this in a number of ways. We must create a bean that has all the variables of your on it with accessors get and then you can move it to your charger FXML namespace and then reference it by using things like ${myConstants.gridAlignment}. Another is to create static methods on a class that a node, these can then be called from the FXML using a notation similar to GridPane.alignment. This second approach only works for things where you want to work directly on the node, but for your scenario which should be ok I think. And then there is always the option to activate a script language in your FXML, allowing you to perform more nothing.

  Hope that helps,
  zonski

• How to get the current line or the entire paragraph?

  Hello.

  I am facing the following problem:

  Suppose I have the following in FrameMaker:

  It is a sentence. And (end of single line)

  There also this sentence. (end of paragraph)

  It is a sentence. And (back)

  There also this sentence. (end of paragraph)

  It is a sentence. And (end of single line)

  There also this sentence. (return)

  But there is also this sentence (end of paragraph)

  It is a sentence. And (end of single line)

  There also this sentence. (return)

  There also this sentence. (return)

  But there is also this sentence (end of paragraph)

  What I want is this:

  Download the text of the entire paragraph where the insertion point of the cursor is.

  However, when exist from the ends of the hard line I want to change their behavior.

  This is the behavior to the foregoing:

  For the first example of the paragraph if the cursor is either first or second line I want to get the whole paragraph.

  Paragraph if the cursor is in the first line, I want only the first line. And if it's in the second row, I want only the second line.

  The third paragraph if the cursor in the first or second line, I want the first and second lines must be retrieved in plain text. Also, if the cursor is in the third line I want only to the third line.

  For the fourth paragraph, it functions as the third paragraph. If the cursor is in the third row I get only this one.

  Could you please provide of the FDK in C++ to start with code?

  It's a puzzle.

  As you are in the forum script, I am related to this here. You must understand the FDK C++ code yourself.

  There's not much to tease my brain with it. You get the point where the cursor is and pick up the pieces of text more line via the GetText() method, using a bit field which includes the FTI_String and the FTI_LineEnd. Each end of the line has a modifier that tells you if it's a hard or a return. You also get the offset in the paragraph of the current position of the cursor, and then create the necessary strings from the array of items of text returned by the GetText method.

  If you want the full execution of the code, ask someone to program it for you and be prepared to pay for the work.

  Good luck

• How to mark the current line in the grid forms

  How to mark the current line in the grid of forms in forms

  There is no grid in use in forms
  However, you were using the ORACLE spreadsheet in the OCX element before 10g in forms5.
  You can use the property of coloring of the ORACLE worksheet if you use older forms.

  If you speak the text displayed in the instances multile means with more display records. then you can use the Visual Attirbute
  and may affect the block attribute in current folder to the Visual attribute you make now.

• How to set the height of cfinput text

  How to set the height of a "text box" in ColdFusion? When I look at this in dreamweaver, the box is multiline, but when it appears in the browser, is only a single line.
  
  < cfinput type = "text" name = "Comments" size = "40" height = "500" width = "150" >

  Hmmm... just changed to

  and it works... didn't even worry Pass Through.

• How to calculate the second and minisecond for audio landmark

  I'm doing a sound synchronization for the clip audio and video in Flash. I found a tutorial on the web, and it seems to work. However, I do not know how to calculate the second and the mini (deuxieme from mp3 file. The first frame has the following lines to set the duration for each animation:
  Import class
  Import net.quip.sound.SoundSync;
  
  Stop the main timeline
  Stop();
  
  Create an instance of SoundSync
  var ss:SoundSync = new SoundSync();
  
  ss.addCuePoint ("IT", 20100);
  ss.addCuePoint ("admin", 20000);
  ss.addCuePoint ("maintenance", 19800);
  ss.addCuePoint ("treatment", 16479);
  ss.addCuePoint ("engineering", 14598);
  as.addCuePoint ("logo_epa_npdes", 12356);
  ss.addCuePoint ("construction", 8967);
  ss.addCuePoint ("370 mg/j", 7896);
  ss.addCuePoint ("mc_650, 000 ', 5439);
  ss.addCuePoint ("130 mg/j", 3254);
  ss.addCuePoint ("1938", 2439);
  ss.addCuePoint ("vintage_mc", 0);
  
  Use the instance of loading external MP3
  ss.loadSound ("Scn04 - 05.mp3", true);
  
  Create a listener object for the
  cuePoint and onSoundComplete events
  var listener: Object = new Object();
  listener.cuePoint = function (): Void {}
  Play();
  }
  listener.onSoundComplete = function (): Void {}
  Play();
  }
  ss.addEventListener ("cuePoint", listener);
  ss.addEventListener ("onSoundComplete", listener);
  
  and the soundsync.as file as follows:
  Import mx.events.EventDispatcher;
  Import mx.utils.Delegate;
  class net.quip.sound.SoundSync extends its {}
  PROPERTIES
  private var _cuePoints:Array;
  private var _currentCuePoint:Number;
  private var _interval:Number;
  private var _intervalDuration:Number;
  private var _secondOffset:Number;
  Event dispatcher
  public var dispatchEvent:Function;
  public var addEventListener:Function;
  private var removeEventListener:Function;
  CONSTRUCTOR
  public void SoundSync(target:MovieClip) {}
  Super (target);
  init();
  }
  METHODS
  private function init (): Void {}
  Initialize properties
  _cuePoints = new Array();
  _currentCuePoint = 0;
  _intervalDuration = 200;
  _secondOffset = 0;
  Initialize the instance of the class as the valid event broadcaster
  EventDispatcher.initialize (this);
  }
  Add Cue Point
  public void addCuePoint(cuePointName:String,_cuePointTime:Number):Void {}
  () _cuePoints.push
  {
  type: "cuePoint",.
  name: cuePointName,.
  time: cuePointTime,.
  target: this
  }
  );
  _cuePoints.sortOn ("time", Array.NUMERIC);
  }
  Get cue point
  public void getCuePoint(nameOrTime:Object):Object {}
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (typeof (nameOrTime) == 'string') {}
  If (_cuePoints [meter] .name == nameOrTime) {}
  return _cuePoints [counter];
  }
  } Else if (typeof (nameOrTime) == 'number') {}
  If (_cuePoints [meter] .time == nameOrTime) {}
  return _cuePoints [counter];
  }
  }
  counter ++;
  }
  Returns a null value.
  }
  Get the Index of the current Cue Point
  private void getCurrentCuePointIndex(cuePoint:Object):Number {}
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (_cuePoints [meter] .name == cuePoint.name) {}
  return the meter;
  }
  counter ++;
  }
  Returns a null value.
  }
  Get the next Cue Point index
  private void getNextCuePointIndex(seconds:Number):Number {}
  seconds (seconds) =? seconds: 0;
  var counter: Number = 0;
  While (counter < _cuePoints.length) {}
  If (_cuePoints [meter] .time > = seconds * 1000) {}
  return the meter;
  }
  counter ++;
  }
  Returns a null value.
  }
  Benchmark deleted
  public void removeCuePoint(cuePoint:Object):Void {}
  _cuePoints.splice (getCurrentCuePointIndex (cuePoint), 1);
  }
  Remove all Cue Points
  public function removeAll_cuePoints (): Void {}
  _cuePoints = new Array();
  }
  Beginning
  public void start(secondOffset:Number,_loops:Number):Void {}
  Super.Start (secondOffset, loops);
  dispatchEvent ({type: "onStart", target: this});
  Reset benchmark
  _secondOffset = secondOffset;
  _currentCuePoint = getNextCuePointIndex (secondOffset);
  Poll for cue points
  clearInterval (_interval);
  _interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
  }
  Load sound
  public void loadSound(url:String,_isStreaming:Boolean):Void {}
  super.loadSound (url, isStreaming);
  clearInterval (_interval);
  _interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
  }
  Stop
  public void stop(linkageID:String):Void {}
  If {(linkageID)
  Super.Stop (linkageID);
  } else {}
  Super.Stop ();
  }
  dispatchEvent ({type: "onStop", target: this});
  Kill the ballot
  clearInterval (_interval);
  }
  Survey benchmarks
  private function pollCuePoints (): Void {}
  If the current position is close to the cue point.
  var time: Number = _cuePoints [_currentCuePoint] .time;
  var span: Number = (_cuePoints [_currentCuePoint + 1] .time)? _cuePoints [_currentCuePoint + 1] .time: time + _intervalDuration * 2;
  If (position > = time & & position < = span) {}
  Send event
  dispatchEvent (_cuePoints [_currentCuePoint]);
  Advance to the next landmark...
  If (_currentCuePoint < _cuePoints.length) {}
  _currentCuePoint ++;
  } else {}
  _currentCuePoint = getNextCuePointIndex (_secondOffset);
  }
  }
  }
  EVENT HANDLERS
  onSoundComplete
  public function onSoundComplete (): Void {}
  Kill the ballot
  clearInterval (_interval);
  Reset benchmark
  _currentCuePoint = 0;
  Send event
  dispatchEvent ({type: "onSoundComplete", target: this});
  }
  }
  
  any help will be greatly appreciated.

  Wuzhishan,

  > Hi Dave, your tutorial is very cute and it is very useful.

  Thank you! My daughter is cute. She inherited all of
  me, so I have not left. ;)

  > I'm sorry that I don't have my question clearly.

  No worries. :)

  > I have listen mp3 in Windows Media Player and try to
  > get both for the tail, I found it on the bottom of the
  > player time indicates 00:26.

  I'm with you.

  > How can I writer this number in the code? Is it 0026 or 26?

  The code expects milliseconds, then 26 seconds would be written as
  this:

  26000

  If he said 01:22 (one minute and 22 seconds), you must write it like this:

  82000

  ... which is 60 seconds for now, 22 seconds
  side, then multiplied by 1,000 to get milliseconds.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• How to keep the Safari line at the top of my screen to disappear?

  How to keep the Safari line at the top of my screen to disappear?

  See the toolbar of Safari mode full screen?

  Launch Safari.

  Click on the Green navigation button to enter full screen mode.

  Move the mouse to the top of the screen.

  When the menu bar and the toolbar drop-down, click on 'View' in the menu bar of Safari.

  In the drop-down menu choose «Always see the toolbar in full screen»

  

  

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals