How to align to the right Edge of the Object with text on the left border in PS?

Similar Questions

• How to align to the left the url in safari browser?

  I want to align to the left of the uRL in the browser of Safri so the favicons are visible and also if I can edit a long URL

  When the URL is centered, click inside the address bar the address left aligns the favicon showing.

  

  

• How to align to the left the mx:Text with a width?

  When I assign a width of mx:Text, the text becomes centered for some reason any. If I remove the width, so it won't wrap plus. How can I get the film and align left at the samt time?

  < mx:Text width = "50" text = "test test test test" horizontalAlign = "left" / >

  Use 'textAlign' instead of 'horizontalAlign'

  textAlign= "left" / >
  

• For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right?

  For an IMAQ image, how is calculated the size of the area of alignment to the left or to the right? My initial assumption of the diagram

  http://zone.NI.com/reference/en-XX/help/370281M-01/imaqvision/imaq_getimagepixelptr/

  is that the left and right are equal. But that doesn't seem to be the case. Can someone tell me the magic formula? A combination of the border width and the width of the image?

  Thank you...

  Andrew

  Andrew_Scott_SPCi.ca wrote:

  All this appeared when I relalized that the mapss Pixel pointer the value 0,0 point of the image, not the point 0,0 of the largest container with areas of alignment and borders. Would be nice if the drawing in the documentation put it.

  This described in help, is not?

  

  Andrey.

• How to align in the middle of the screen flash content in the browser?

  I'm currently building a cs5.5 using AS2.0 flash site. One of the pages is 1024px wide by height of 1536. I want the display to only show that the first half of the screen and then the user must scroll down using the browser scroll bar to see the second half of the screen.

  Here is the html code. I changed the "overflow" hidden to auto so that the site is drop-down. However when I saw the Web site in the browser, it is aligned to the left. Even if below (highlighted in red) it says "medium". This isn't what I want, I want the site me aligned in the Middle, so that there is a border of hand and on the other Web site. I tried several things to fix but all without success. Could someone please help. Let me know if you need more information.

  Thank you

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" > ""

  "< html xmlns ="http://www.w3.org/1999/xhtml"lang ="fr"XML: lang ="fr">"

  < head >

  aboutus < title > < /title >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < style type = "text/css" media = "screen" >

  HTML, body {height: 100%; background-color: #333333 ;}}

  Body {margin: 0; padding: 0;} overflow: auto; }

  #flashContent {width: 100%; height: 100% ;}}

  < / style >

  < / head >

  < body >

  < div id = "flashContent" >

  < object classid = "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width = "1024" height = "1536" id = "aboutus" align = "middle" > "

  < param name = "movie" value = "aboutus.swf" / > "

  < param name = "quality" value = "best" / >

  < param name = "bgcolor" value = "#333333" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "aboutus.swf" width = "1024" height = "1536" > "

  < param name = "movie" value = "aboutus.swf" / > "

  < param name = "quality" value = "best" / >

  < param name = "bgcolor" value = "#333333" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-<! [endif]-->

  "< a href ="http://www.adobe.com/go/getflash' > '.

  "< img src ="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif"alt ="Get Adobe Flash player"/ >"

  < /a >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < / div >

  < / body >

  < / html >

  {#flashContent}

  Width: 1024px;
  left margin: auto;

  margin-right: auto;

  }

  Get rid of the 100% w/h and give flashContent fixed wide (1024).

  Then you can give the right and left of auto... centering of the

  .

  Best wishes

  Adninjastrator

• Problem with text table: text align to the left in the table

  I can't try to get the text to align inside a table. I'm working on a document that has the body text indented to 12 mm. I discovered that the left of the table corresponds to the tabs and it remains fixed on the marks of the tab. I managed to get the first row of the table to align the text of body outside of the table and the table is positioned how want it to be, but I can't get the rest of the text to align with the first line. Here is a screenshot of the problem:

  

  I did it by changing the removal of paragraph to 12 mm and by changing the withdrawal of first line to 12 mm. I've been fiddling with the tabs and other settings, but I can't not all aligned text. Is there a way to align it all without creating a separate or rectangle text box?

  Best regards, Kirk

  Thanks for your help. I just found out that I was using a paragraph style just outside the table who had no hyphen, and it prevented me to rethink the table. Your method worked, but only in the document with examples I showed you. (I did separate because I work on the project of sensitive information) and when I pasted in my working paper, the table is always aligned to the left margin. I then checked the paragraph mark immediately after the table, and there was my problem. I just changed the paragraph style to the same as the outside of the body text. This caused the table to align the body text without affecting the text inside the table.

  

  Best regards, Kirk

• Mobile, layout, aligned to the left

  I created a website using Adobe Muse and transferred the site to the ftp server. The site is online and is designed when looked at through a desktop computer. But when the same site is accessed from a mobile phone, the entire page is aligned to the left and there is a shift to the right. I even made a model of phone and the same uploaded to the ftp server and the problem persists. I've google a lot and html inserted the code in the metadata to make the site Center but in vain. Nothing works . I have a tight schedule and would be really grateful for any help fast.

  Hello

  If available to phone appears in the phone and still aligned left her and then go to the mode of the layout design phone page and make sure that it has no object is placed outside the area of the browser. (you can select all to check this. ctrl + a or command-A)

  If this is not the case please share the site URL file or .muse with us make the look.

  Concerning

  Vivek

• Why my site is aligned on the left side of the browser space?

  Hello, I would like to inquire about a small problem that I seem to not be able to solve.  All the sites I found, addressing her, well... a lot of these posters are display very different 'solutions' by pasting in a very complex coding and technical language.

  Basically, I noticed that even if my page is designed in dreamweaver with a width of 960 pixels, if I continue to open the browser in full-screen, or open it by stretching, the web page itself doesn't have a sort of automatic alignment on BOTH sides.  Any other site I found has this function (unless they use a width of 100%, which I'm choosing not to because I don't know how to put a picture of the banner of a certain pixel size when the width is in percentages... go figure.

  SO, how do the outdoor spaces in the browser (the space outside my real site) give the same amount of space on both sides, instead of paste the page on alignment to the left of the browser?

  Thank you!

  < body >

  < table width = "960" height = '767' border = "1" bordercolor = "#666666" cellspacing = "1" >

  < b >

  < td height = "240" colspan = "3" bgcolor = "#FFFFFF" > < div align = "center" >

  < p > < img src = "piano1.gif" width = "960" height = "240" alt = "piano" / > < / p > "

  < / div > < table >

  < /tr >

  < b >

  < td width = "164" height = "383" bgcolor = "#996699" > < p > < br / >

  Since you don't seem to be too concerned with the operation of it, the simplest solution would be to add align = 'center' to your table to open.

  bordercolor align = 'center' = "#666666" cellspacing = "1" >

• How to justify to the left or right one aligned controls within a container.

  Hello

  I'm trying to put a label in a container to the left full, and then another (ToggleButton in my immediate case) control on full right. How can I do this?

  I tried without success to the following:

  ToggleButton * toggle = new ToggleButton();

  activate / deactivate-> setHorizontalAlignment (HorizontalAlignment::Right);

  myContainer-> add (toggle);

  Thank you!

  I actually received this works using the following code, I use a DockLayout in this case:

  Controls installation

  ScrollView * scrollView = new ScrollView();

  scrollView-> setHorizontalAlignment (HorizontalAlignment::Fill);

  ScrollViewProperties * scrollViewProp = scrollView-> scrollViewProperties();

  scrollViewProp-> setScrollMode (ScrollMode::Vertical);

  Container * mainContainer = Container::create () .left (0) .right (0);

  mainContainer-> setHorizontalAlignment (HorizontalAlignment::Fill);

  Container * subcontainer = Container::create () .left (20) .right (20) .top (20) .bottom (20);

  Subcontainer-> setHorizontalAlignment (HorizontalAlignment::Fill);

  Subcontainer-> setBackground(Color::fromARGB(0xffffffff));)

  Container * subContainerLeft = Container::create () .left (0) .right (0);

  subContainerLeft-> setHorizontalAlignment (HorizontalAlignment::Left);

  subContainerLeft-> setVerticalAlignment (VerticalAlignment::Center);

  Container * subContainerRight = Container::create () .left (0) .right (0);

  subContainerRight-> setHorizontalAlignment (HorizontalAlignment::Right);

  subContainerRight-> setVerticalAlignment (VerticalAlignment::Center);

  DockLayout * subContainerLayout = newDockLayout;

  Subcontainer-> setLayout (subContainerLayout);

  Controls are added to the left and right here!

  Subcontainer-> add (subContainerLeft);

  Subcontainer-> add (subContainerRight);

  mainContainer-> add (subContainer);

  scrollView-> setContent (mainContainer);

  this-> setContent (scrollView);

  Thanks for your response!

• How to group on the left and right audio tracks of a. OMF file?

  Hi, I'm changing the sound of my short film, I sent one. OMF to audition for the first, but the left and right channels are separated in the multitrack session tracks, how would group them so whatever I do to a channel, will be the other

  This is because the OMF specification requires mono audio files

  It really depends on what you're trying to do with the two tracks as the best answer to the extent of the 'group '.

  You can select all the clips on the tracks and right mouse click on and select "group".

  You can send two channels to a bus

  You can export the two lanes to a stereo file and that bring in the session

  Many more things I know not but a little more details about what you're trying to do would help

• Videos YouTube are aligned on the left edge of the screen

  Since some time last week, Youtube has been show videos lined up on the far left of the screen edge. Resizing, it does nothing, it seems to be stuck there.

  This is different from the redesign - there is no space to the left of the video, it is rather unsightly.

  I tried to run Firefox in safe mode with all add-ons disabled, but this has not solved the problem.

  It's Firefox on Mac OS x 23.0, but it was also very recently on 22.0 too before I updated.

  I thought I'd be able to download an image with this post, but I'm not a field for that, well, he was transferred to imgur: http://imgur.com/BsGZfBC

  Anyone know what is happening here?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• Align to the left of the text OCR

  Hello

  I have recently scanned in several pages of a document and you have run it by OCR. All right, except that the text on some pages is not aligned with text on the following pages (see example in the image below):

  

  Each page is misaligned slightly differently from the others, and I don't want to realign it all manually. Is there a method to automatically align the text vertically in an automatic way after doing OCR on a document?

  B1177

  Not directly. You can use the object-editing tool to move the entire block and the crop tool to make things consistent. Maybe it's a little more manual that you like. I don't think that be able to automate it.

• How can I disable the strengths / border object?

  I was working on a scene frame by frame when all of a sudden (I don't know exactly what I was doing) borders the square around every brush stroke I draw as the figure on the right:

  

  I tried to turn off time (Ctrl + H), strong but borders keep re appearing. Basically, I want to just go back to the original selection mode but also to get rid of the borders, after that I drew my brushes as listed below:

  

  How can I disable the strengths / borders oppose permanently as well as regular to activate brush selection?

  Object drawing sort of put on. With the brush using struck J to toggle.

• Alignment to the left of the lists drop-down/dates

  Is it possible to align the drop-down list or a date picker (assume that without label) to the left as opposed to the default is good?

  Thanks in advance!

  Give it the style FIELD_LEFT by the manufacturer.