How to allow access to a local area network behind the cisco vpn client

Similar Questions

• What are the ports used by the Cisco VPN Client?

  Hello

  I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

  I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

  What are the ports used by the Cisco VPN Client?

  Thank you

  You need to open:

  UDP 500

  ESP protocol

  You must also open the UDP 4500 port (if using NAT - T).

  In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

  1. If using IPSec over TCP 10000, then open TCP 10000.

  2. If using IPSec over UDP 10000, open UDP 1000.

• How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Dear all

  How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

  Concerning

  Hi Imran,

  Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

  Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

  Once you create and save this profile. Your FCP file is stored.

  Please assess whether the information provided is useful.

  By

  Knockaert

• How to save the password to the Cisco VPN Client?

  Hello

  I use version 4.8 to connect to the VPN from my client, I would like to save my password so that I don't have to enter it each time.

  I've amended the FCP file to include:

  ! SaveUserPassword = 1

  and my password in UserPassword =, but it worked only once, after I restart it no longer works.

  Then I see the method to use the command-line vpnclient.exe to connect and provide the password as a parameter to the command:

  vpnclient connect user pwd

  But I got this error when you try to connect:

  Setting user password failed. User password is read-only.

  And the client always requests the password.

  Any ideas?

  Thank you

  The server sets the password save, you will not be able save locally unlessit is enabled on the server side. If the customer has an ASA, follows allows him under the group policy for VPN clients.

  allow password-storage

• No Internet access after the connection of the cisco vpn client

  Hi Experts,

  Please check below config.the problem is vpn is connected but no internet access

  on the computer after the vpn connection

  ASA Version 8.0 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 192.168.10.10 255.255.255.0
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  IP 192.168.14.12 255.255.255.0
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
  INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
  55.240
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool testpool 192.168.14.240 - 192.168.14.250
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access INSIDE_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.14.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
  Crypto-map dynamic dyn1 1 set transform-set setFirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  password encrypted user testuser IqY6lTColo8VIF24 name
  username password khans X5bLOVudYKsK1JS / encrypted privilege 15
  tunnel-group mphone type remote access
  tunnel-group mphone General attributes
  address testpool pool
  tunnel-group ipsec-attributes mphone
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
  : end
  ciscoasa #.

  Hello

  Large.  Try adding the below to make it work

  vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

  NAT (inside) 0-list of access vpn-sheep

  Harish

• Client VPN sail to 10.0.0.0 when you are connected to the Cisco VPN

  I have a cisco ASA that provides access remote vpn for users. The address pool is 10.16.135.x. When a user (windows) connects to the VPN, a route to 10.0.0.0 255.0.0.0 is added to the routing table. If the private IP address of the user is in the 10.x.x.x range, the user can still connect to its local network. However, if the user has a remote site that also uses 10.x.x.x, the user is no longer able to connect to the remote site because of the 10.0.0.0 new road is added after the vpn connection is established.

  10.0.0.0 255.0.0.0 on a 10.16.135.217 route 281

  10.0.0.0 255.0.0.0 10.0.0.1 10.16.135.217 100

  10.16.135.217 255.255.255.255 on a 10.16.135.217 route 281

  Small,

  Can you please set the pool like this:

  mask 10.16.1.10 - 10.16.1.254 255.255.255.0 IP local pool Subnet_10

  Test again and I would like to know the results.

  Daniel Moreno

  Please note all messages that will be useful

• How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)

  Hello world

  I have a cisco router 2800 installed in our company
  and I have it configured as a VPN server for professional help (cisco configuration)
  with the ease of the VPN Server Wizard
  Can I connect to this server using windows XP or 7 dialog VPN?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Cisco VPN Client - what are the ports I need to open the 1841?

  Hello. As it says on the Tin really, what are the ports I need to allow my access on our 1841 list to allow the Cisco VPN client on through it?

  Ta

  UDP 500 (isakmp)

  UDP 4500 (nat - t)

  Protocol ESP 50

• Problem Cisco VPN Client with local authentication

  I configured PIX for the Cisco VPN client for remote access. It must be connected and also inside network is accessible. It is without any authentication username. It works well with a vpngroup name and the password for the vpngroup, configured on PIX and also on the Cisco VPN client. (version 4.6)

  When I configure crypto for local authentication, it did not work. configuration is as follows.

  #crypto card: name of the map of local authentication client

  I created a user with private = 15.

  Client VPN must be connected, and then it pops up a window user name and password. After giving these details. The user is not authenticated.

  Are there patterns more to do in / isakmp / ipsec / aaa configurations.

  Thank you

  AAA-server local LOCAL Protocol

  client authentication card crypto remote_vpn LOCAL

  client configuration address card crypto remote_vpn throw

  client configuration address card crypto remote_vpn answer

• Cannot access network resources - Cisco VPN client

  Please see attached the network topology.

  I can connect using the Cisco VPN client and access to all resources of the 192.168.3.0 network

  I can't ping / access to all hosts on the network 192.168.5.0.

  Any ideas?

  Thanks for the help in advance

  AD

  Quite correct.

  Please add has the access list:

  CPA list standard access allowed 192.168.5.0 255.255.255.0

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• How to allow access to all users of the connection on my computer?

  How to allow access to all users of the connection on my computer?

  Your question is hard to understand.  I interpret as:

  "How to allow all the users on my computer to access some files or folders?

  The answer depends somewhat on the question of whether you have XP Pro or XP Home, but a general answer is found the following article.

  "How to use file sharing Simple to share files in Windows XP"
    <>http://support.Microsoft.com/kb/304040 >

  Click on "level 3: files in shared documents available to local users"

  HTH,
  JW

• I LR4 on my Mac with a few 8 000 images on it. If I buy the creative cloud, do I download LR5 on my desktop and how can I access these images or are they automatically imported?

  I LR4 on my Mac with a few 8 000 images on it. If I buy the creative cloud, do I download LR5 on my desktop and how can I access these images or are they automatically imported?

  There is no forced use of the LR5 and your LR4 will remain in place and active. If you decide to use LR5 will try, import your catalogs.

  Mylenium