How to apply the color to the line in a tabular presentation

Similar Questions

• Show/Hide button on the line on a tabular presentation depend on the values of line.

  I want to show/hide (or toggle so easy) a button link to page of line on a dependant in a table on the other line values.
  
  For example if I had a table, built form using the form wizard based on the EMP table with a query: -.
  
  Select
  EMPNO,
  EMPNO EMPNO_DISPLAY,
  ENAME,
  EMPLOYMENT,
  BISHOP.
  HIREDATE,
  SAL,
  COMM,
  DEPTNO,
  'button' but1
  from EMP
  
  The column of buttons is used as a link to a page. But I only want to be displayed/activated if the WORK is a "SELLER". Does anyone know how to do this? Or give me any suggestions?
  
  Another option would be to have a button under the lines enabled/disabled depending on when you click on a line and this line having a JOB "SELLING."
  
  Thanks, Pete

  Then - under condition - select the exact anchor (+ image) of your select statement (and display it as as a standard report column).
  (Unfortunately) does not allow any conditional display for a link (or a link element) in a tabular form (in the current version, should be a nice improvement however).

• How to apply the Swatch of paper color on the page

  Hi Experts

  I want to apply the paper Swatch on the page color.

  I have try this to set the paper Swatch color but no success.

  indesign #target

  myDocument var = app.documents.add ();

  myPages var = myDocument.pages;

  myPage = myPages.item var (0);

  var swatchclr = app.activeDocument.swatches.itemByName ("Paper") .properties = {space:ColorSpace.RGB, model: ColorModel.PROCESS};

  swatchclr.colorValue = [255,150,0];

  There is no change in the value of the paper Swatch color.

  How to apply that color on the page?

  Thank you.

  Hello

  Watch this line ('=' repeated):

  app.activeDocument.swatches.itemByName("Paper").properties swatchclr = = {space:ColorSpace.RGB, model: ColorModel.PROCESS};

  swatchclr.colorValue = [255,150,0];

  Swatchclr is a swatch.properties not a swatch.

  Make:

  swatchclr = app.activeDocument.swatches.itemByName ("Paper");

  swatchclr. Properties = {space:ColorSpace.RGB, model: ColorModel.PROCESS, colorValue: [255,150,0]};

  Rgds

• How to apply the gradient to the entire page

  Hello

  Can someone tell me please how to apply the gradient to the entire page as a gradient background color.

  I tried for centuries and can not see the routes to apply background color

  any ideas? step by step please I really get lost because I'm new to Indesign and do not know the names of all the tools.

  Thank you

  If you want to this gradient to print (or export) with the page, and then you have to draw a rectangle and fill with the gradient.

  If you want on a number of pages, put the rectangle on a master page. You might want to add a layer and move it to the back, put the rectangle on that layer, then lock the layer.

  Dave

• How to choose the line PFI to use on the port of the 5761?

  I understand that the VIDEO that I use on my DAC 5761 allows me to access 8 PFI lines.  However, when I access my 5761 devices in the project window by clicking the "+" next to the name of the module, I see that 'PFI Input' and ' output PFI.  I tried to get this to send a signal in the past, but I have been unable to determine how to select the line PFI I want to use.   How can I select the PFI line?

  Any ideas?  I was able to get the my AWG PFI (5422) for work and it is amazing.  I want to order an attenuator digital step for a ground penetration radar that I develop.

  Your time and your help is very appreciated.

  PS: I have worked with this PXI system (chassis, embedded controller, FPGA digitizer 5761 and AWG) for 1 year and I am afraid that it is time to learn this one way or another.

  Good day!

  -Daniel

  I found the solution. In addistion to the node which is visible in my previous post, there must be a node to enable PFI write with an entry of decimal number indicating the line is activated. Then, there must be a node PFI active connector, set to true. Not sure if the node of the latter is really necessary, however. Otherwise above examples should work as is.

• How to apply the "Slate Pro Light" using CSS font?

  Hello

  Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

  Thank you.

  I usually use the definition of CSS of police-family at the following address on my html and body elements:

  font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
  

  Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

  font-weight: normal|bold|bolder|lighter|number|initial|inherit;
  

  In this case, lighter, might do the trick?
  

• How to apply the strategy of UCS1.4 collection (1 d)

  Hi all

  I try to collect statistics on the performance of the network. but do not know how to apply the policy to the collection.

  Service profile, I cam see political Stats. But within the political framework of Stats, there are onlu available in config/choice is political threshold.

  Can someone help out me? Thank you very much!

  I think this is what you are looking for?
  
  UCS stores the past 5 statistics records at the "Reporting Interval" setting;
  
  There is no configuration to change that number.  You can put this interval out 8 hours but then you only get a snapshot every 8 hours. Trending or history retrieval would require an interval based extraction and storing application that utilizes the UCS XML API.
  This is a link to the UCS XML API information.
  
  http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/api/ucs_api_book.html
  
  

• How to apply the theme of Oracle Alta UI in ADF

  Hi all

  I use Jdeveloper 11.1.1.1.7.2 release1.

  Can anyone provide your inputs on how to apply the theme of Oracle Alta UI in the ADF.

  For any consultation on Alta IU @ http://www.oracle.com/webfolder/ux/middleware/alta/start-develop.html

  Thank you and best regards,

  Miko Auntie.

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/start-develop.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/patterns/PageDesign.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/new-dev-w-Alta-skin.html

  Oracle ADF: Customized design

• How to draw the line under STROKE and fill of an object in illustrator cc? Ideas: D...

  How to draw the line under STROKE and fill of an object in illustrator cc? Any ideas ...

  Aleksandar,

  If I (put) understand it, you will need to divide the object. You can:

  (1) select the object and Ctrl / Cmd + C + F, and then remove the filling of the copy and the blow of the original;

  Draw 2) and drag the new piece down between Division 1 objects) in the layers palette, or select 1 copy) and Ctrl / Cmd + C + F + X + F or similar.

• How to apply the filter to a specific column condition, but not to the report?

  Hello
  
  I'm having a problem in the application of a filter to one of the column condition.
  I have a scheme with the table around 10 dimension tables and a fact. My requirement is to provide a count on the table of facts with associated with some other columns in the dimension tables.
  
  Lets consider a scenario with tables as sales (Fact), region (Dimension), Year (Dimension), Type of sale (Dimension).
  
  Now my requirement is to highlight the fields
  
  City (Region) - city
  Year-
  Sales Count (dirty table) - number of all sales of the fact table
  Sales Count (dirty table) - count of all sales of the fact which type of sale table is 'Cash'
  
  Here, my question is how to apply the filter condition of Sales Type = 'MONEY in' only on one of the Sales Count column that comes from the fact table. I want to be ordered for the fourth column, the filter condition.
  
  Can someone let me know how?
  
  Thank you

  You must do this:

  1) click the button column fx sales. (This procedure does than on fact, not attributes.0

  2) click on the filter button.

  (3) select the size of sales from the left Type "selection list."

  (4) in the filter window, enter CASH, and click OK.

  This will create one filter on sales 'use' size 'type sales' as the filter. It willl filter only to this column.

• How to apply the mass PhysX to a w3d created with max

  Hell,

  I need to figure out how I can do to apply e.g. "mass" or "restitution" to some body created with 3d max and imported in Director w3d format.

  I know how to apply 'transform.position', 'transform.rotation' to a w3d created with max.
  and how to apply the mass and the return of an object that is created with lingo, but I do not know how to do mass a w3d created with max.
  Who is the syntax?

  Can you give me a hint?
  Thank you.

  It works for me :-)

  I sent you a private message.

• How to apply the AUTOFILTER on interactive report.

  Hello
  
  I'll have a report / form based on assume that the table EMP
  
  Page1 - Interactive (report)
  Page 2 - form
  
  report query-> select * from EMP;
  
  1 has created a new employee P2_EMP ('ABC') on page 2 and SAVE the record.
  2. as soon as I save the record on page 2, the control returns to Page1 (Interactive report)
  3. on page 1, all the Archives of the employees are displayed.
  
  What I want to, whenever I create a new employee P2_EMP = 'ABC' and SAVE the record, control on Page1 (Report) but only recording with employee P2_EMP = 'ABC', should be displayed on page 1...
  
  HOW can I achieve., I mean how to apply the AUTOFILTER on Page1 (interactive report)
  
  Currently, I have to manually apply the FILTER on page 1 (employee = ABC), I want to avoid.
  
  Thank you
  Deepak

  Hi Deepak,

  Could you have another element to the 1 'P1_NEW_EMP' page, pass this back into your branch when control passes from Page 2 to Page 1 and then put it as a condition of your report.

   select * from EMP
  where (employee = :P1_NEW_EMP or  :P1_NEW_EMP = '');
  

• How to change the line width of underline and color (on my MacBook or iPad)

  When you use my MacBook or iPad, how can I change the line width and color when you use the underline tool or the pencil tool?

  Hi Backpacker48,

  .. using the underline tool or the pencil tool

  I'm fairly certain that you may have about the comment tools.

  To highlight the tool, there is no option to change the line width (thickness).  But you can change the color and opacity.  In addition, you can change the style in the desktop application.

  For the Pencil tools or drawing freehand, you pouvez change the width of the line (thickness) in addition to the color and opacity.

  The key here is to change the properties of an existing comment, once it is added to a page.

  Acrobat Reader DC (desktop application) on your MacBook

  1. Right click on the brand of underscore or existing pencil.
  2. Select properties from the context menu.
  3. Select appearance (if not already displayed).
  4. Specify the value of a property (color, opacity, Style or thickness).

  

  

  Acrobat Reader for iOS (mobile application) on your iPad

  1. Tap the existing underlining or drawing freehand.
  2. Select a property (color, opacity, thickness) in the menu that appears.
  3. Specify the value of the property.

  

  

  Once you change a property (for example, thickness, color, opacity), the mobile app will remember the new value of type specific comment for next time.

  Please let us know if you have any additional questions.

• How to apply the constraint ONLY to new lines

  Hi, gurus:

  I have a question as follows:

  We need to migrate a legacy to a new production server system. I have to add two columns from each table to record that updates the row most recently through triggers, and I must ask constraint not null for columns. However, since the old system has already given for each table and old data have no value for 2 new columns. If we apply the constraint, all existing lines throws an exception. I wonder if there is possibility to apply the ONLY constraint to the new lines coming in the future.

  Thank you.

  Sam

  We need to migrate a legacy to a new production server system. I have to add two columns from each table to record that updates the row most recently through triggers, and I must ask constraint not null for columns.

  The best suggestion I can give you is that you ensure that the management of the documents on behalf of the person who came up with this requirement of brain hair so they can sufficiently punished for the huge waste of human and database resources they have caused for which they almost NOTHING got in return in the future.

  I've seen many systems over the past 25 years + who have added columns such as: CREATED_DATE, CREATED_BY, MODIFIED_DATE MODIFIED_BY.

  I have yet to see a system where this information is really useful for any real purpose. Many systems have the users/application schema, and users can change the data. In addition, a DBA can modify the data, and many of them can connect as long as the schema owner to do.

  Many tables also updated by other applications or processes of loading of bulk and these processes use generic connections that cannot be attached to any particular system.

  The net result is that these columns will be filled by user names that are completely useless for verification purposes.

  If a user is allowed to edit a table, they are allowed to modify a table. If you want to track that you need to implement a security strategy appropriate using the functionality of Oracle's AUDIT.

  Encumber ALL or even many of your tables with columns is a very BAD idea. Worse is the addition of doesn't trigger this server no other goal but captures the useless information, but because they are the impacts on performance just PL/SQL cause worse the total impact.

  Must certainly be to worry about security and auditability of your important data. But by adding columns and triggers, such as those proposed is NOT the right solution to achieve this security.

  Before your organization any decision so stupid you should propose that the same steps before adding this feature you should take before the addition of ANY structural MAJOR or the application:

  1. document the real need

  2 document and justify the business reasons for this need

  3. perform tests that shows the impact of this requirement on the production system

  4. determine the cost of the resources (people, storage, etc.) to implement this requirement

  5 demonstrate how this information will actually be used EFFECTIVELY for professional purposes

  With regard to points #1 and #2 above that the requirement should be noted with regard to the PROBLEM to be solved, not a some preconceived notion of the solution that should be used.

  Your org should also speak to other associations or other departments in your org even who have used your proposed solution and discover how useful it was for them. If you do this research, you may find it has not responded to their needs at all.

  And in your own org, there are probably some applications with tables that already have such columns. Has anyone here EVER used these columns and found them invaluable to identify and solve any real problems?

  If you can't use them and why first add their data to some important process?

  IMHO, this is a total waste of time and resources to add columns in your tables. Any such audit or security, at least, approach will be limited to those tables with key data that needs to be protected, and then only when you cannot implement the appropriate audit "best practices".

  A migration is hard enough without adding unnecessary additional expenses such as those. You have MUCH more important you can do with the resources that you have:

  1. capture all THE DDL for the existing system in a version control system

  2. train your developers on the use of the version control system

  3. determine the correct configuration of the new server and the system. It's almost a CERTAINTY that parameters will change and performance will suffer even if you don't think you have changed anything at all.

  4. validate that the data was migrated correctly. Which may involve a broad polling and comparison to make sure that the data has not been altered during migration. The validation process to a SINGLE TABLE is more difficult if the table structures are not the same. And they will not if you add two columns in each table; every single request, you do have to specify the columns by name in order to EXCLUDE from your two new columns.

  5. validate the performance of the app on the new system. He there will HAVE problems where things do not work as they did. You need to find these problems and fix them

  6 capture appropriate statistics after that data has been migrated and all indexes have been rebuilt.

  7 enter the new implementation plans to use a base for when things go wrong in the future.

  If it's worth doing is worth doing right.

• How to apply the color gradient to stage BG

  How to apply a BG color gradient to the scene in FLASH 8 Prof? I made a dark blue gradient light blue in the color mixer, tried to use the paint bucket, but it will not work... What do I do?
  
  Thank you
  KO

  Thanks for the reply - Yes, that's what I did today and that's very good, so I guess we can't add a gradient to the scene?

  KO