Tecra S4 with intel virtualization (vt)

Similar Questions

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• No Wireless N on Tecra M10 with Intel Wifi Link 5100agn a XP Pro

  Hello

  I can not connect mode n to my wireless n router. There's always going to G.
  The driver that I use is 12.4.0.21 4.3.2009.

  802.11n mode is enabled, everything is set by default.

  Without thread-mode is set to standard, a., b and g.
  I wonder why the n modus is not shown here. This is perhaps the reason why I can't use the n-modus?

  Thanks for any help

  Rolf

  Hello

  > Wireless mode is set to standard, a, b, and g.

  Do you want to say that these WiFi modes (A, B and G) are defined in the settings of your WLan card?
  If Yes, then this would be the reason why the M10 doesn t use the Draft N.

  If you want to use the Draft N then this standard Wlan key must be activated in the router WLan and Wlan card settings!

  Wlan card settings can be changed in:
  Device Manager-> Wlan card properties-> Advanced tab

• World of Warcraft on Tecra M5 with Nvidia video problem

  Hello

  I own a laptop very well supported - Toshiba Tecra M5 with the following specifications

  Processor: Intel Centrino Duo - T2600 @ 2.16 GHz and 2.16 GHz
  RAM: 4 GB
  Video: Nvidia Quadro NVS 110M
  OS: Windows Vista Ultimate 32-bit (on the highest performance with all the eye candy settings disabled)

  The phone plays very well, but when I try to play world of Warcraft I encounter problems in the screenshots below

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075336.jpg
  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_075634.jpg

  I tried playing with the drivers on the Toshiba site (dating back to 2007) and I also tried the latest version of the driver directly from nVidia but no change in performance

  Running the game in opengl mode makes things worse.
  Sometimes, glitches video will change the above to the following

  http://www.exeedstudios.com/temporary/WoWScrnShot_051809_090648.jpg

  In the world of Warcraft Support Forum I was told to contact the manufacturer of the video card may be defective.

  Thanks in advance for your help.

  Hello!

  It seems that your graphics card is broken...
  You have this problem on other games also or only with World of Warcraft?

  But it could also be an overheating problem. Have you tried to clean the laptop using a jet of compressed air? This could blow out the dust from the cooling fans.

  In the worst cases, you should contact an ASP. Technicians can check your laptop and share the graphics card if it of necessary.

  Good bye

• Satellite U500 - how to enable Intel virtualization technology?

  How to enable Intel Virtualization Technology Satellite U500 / if this feature is already available or not because im VMware configure in my laptop and when I used to to launch I get the message

  * You have configured the virtual machine to use an operating system 64-bit client. However, the 64-bit mode is not possible. This host does not support VT.*

  Either way, my laptop is Windows 7 Home Premium 64 bit, 3 GB RAM, Core2duo

  Hi hersi,.

  There are different models of U500 on the market with different hardware and virtualization is dependent on the BIOS and CPU. Not all Core2Duo processors support Intel VT technology.

  So before you start a lengthy discussion which U500 model you exactly? Can you post the exact model number please?

• Tecra A3 - 106 Intel Graphics memory Question (915GM)

  Hello, no doubt this will be a strange question, but please accept my apologies, I can't understand it well...

  I have a Toshiba Tecra A3 106 with 915GME 128 MB Intel graphics card... He used to appear as a memory of 128 MB on my system, and somehow, it is now limited to 64 MB probably after update my drivers or a change to the settings of this unit, somewhere...

  I recently updated my bios to v.2.50, could this be the reason? or the most recent driver for the game? (I am currently on 6.14.10.4543)

  I know that I must be blind I can't find the setting for this... But I need your help...

  Thanks in advance...
  Onur.

  EDIT: I realized that it is a thing of BIOS 90%... Phoenix BIOS 2.50 does NOT contain an option to change the graphic committed memory size of 64 MB to 128 or vice versa... My previous BIOS was this option in the tab "Advanced"... And... I can't downgrade to the previous version as installer does not support the downgrade... PS: I checked the Windows settings this topic... Not found no apparent solution...

  Edit2: Found this link about the question on the Toshiba site: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1079 556xml & sliceId = & dialogid = 1150837 & stateId = 0% 200% 201 152026

  Obviously, this is a bug in the BIOS and the source suggests that v1.70 and newer versions are fixed... I REALLY DON'T THINK!

  ANY IDEAS TO GET AROUND THIS?

  Post edited by: Sphinx

  Hello Onur

  The link you posted from TOSHIBA U.S. page and I assume that you have a European model of laptop. If you want to update BIOS please use Toshiba European page. The United States from Toshiba is like another firma and it isn't really the same thing.

  If models of laptop computers in the United States some problem it doesn? t means that all Toshiba laptops have the same problem.

  I checked that your model of laptop shared graphics memory card. I guess you know what that means and the fact is that units with Intel graphics card have no parameters where user can manually set the amount of memory must be used. On ATI graphics cards settings it is possible. I checked a few notebooks similar and in the Phoenix BIOS I didn? t find anything. Because of this, I'm really confused when you mean that this option was available on the ADVANCED tab.

  I really hope that someone who have the same unit as you can give us a good info about it.

  Good luck!

• Intel Virtualization Technology - Thinkcentre A58 - Pentium Dual-Core E5300

  Hello

  I am considering buying a ThinkCentre A58 with a clocked Intel E5300 processor
  Model/type: 7515-7SG

  I would like to run "Windows XP Mode" on Windows 7 Pro.

  For the XP Mode, I need ability IVT.

  My Question is:

  The Lenovo 7515-7SG come with an E5300 CPU which is capable Intel virtualization technology?

  IVT depends on the TECHNICAL Code of the E5300 CPU.

  Intel offers CPU E5300, who do not have the ability of IVT.

  E5300 know:
  http://Ark.Intel.com/product.aspx?ID=35300#specs

  E5300 Code TECHNIQUE

  * SLB9U: IVT No.
  * SLGTL: IVT Yes

  Check the E5300 features supported:

  http://processorfinder.Intel.com/list.aspx?ParentRadio=all&ProcFam=2841&SearchKey=

  Even if Lenovo ships an E5300 with SPEC Code SLGTL - needs a BIOS that does not block IVT.

  ... made the A58 BIOS IVT available?

  I already searched the Lenovo Thinkcentre A58 product support site - has not found something valuable.

  Thank you

  I found the answer.

  I'm sitting in front of a whole new Thinkcentre A58 7515-7SG equipped with a Pentium Dual Core E5300

  http://forums.Lenovo.com/T5/welcome-FAQs/tool-to-check-support-for-Windows-XP-mode/m-p/167695

  Detection of virtualization hardware support tool says:

  This computer is configured with

  hardware support for virtualization.

  Great!

  My A58 can run Windows XP Mode

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

• 4-1050ca want does support Intel virtualization technology

  Hi I know the processor supports the technology Intel Virtualization, but according to the fine print on the data sheet of the processor on the Intel Web site:

  Intel® virtualization technology requires a computer with a processor, chipset, BIOS, monitor virtual machine (VMM) and for some uses, certain platform software enabled for it. Functionality, performance or another advantage varies depending on the hardware and software configurations. Intel virtualization technology VMM applications are currently in development.

  I need to know if the chipset and BIOS are enabled for it.

  Here is a screenshot of what the BIOS options have been identified, when I checked.

  

  From the information available, it looks like it supports virtualization because the BIOS has the option for her.

  If by slim chance get you and in fact, it doesn't have the option (which she has since the BIOS information I watch it), it can always be returned to HP within 21 days of purchase if you bought at HP.

• Will ESXi 3.5 on Dell SC440 with Intel E2180

  New to VMWare and any type of Server Virtualization techniques... I'm just checking

  hardward compatibility with the Dell PowerServer SC440 running an Intel E2180 bicoeur.

  Specifications of Intel tell me that this chip is NOT "Intel Virtualization Technology"

  I'm SOL install ESXI 3.5 on this server?

  Thanks - I want to make sure that this isn't a hardware problem before you spend many hours

  fight against the configuration and hardware... dcasciato

  A customer of Dell review indicates that the server supports VMware 3.5 very well. Without the support of VT, he wouldn't be able to support 64-bit customers. It seems a bit low on RAM supported and it doesn't have a hardware RAID so unless this is a production environment and you are not pregnant to accommodate more than a few guests, you should be fine.

• Can not turn on CVS on blades with Intel E7320 and E5440 processor

  Does anyone know hot to activate CVS on the esx host, one with 2xQuad Core Intel E7320 CPU, the other with 2xQuadCore Intel E5440 CPU?

  When I try to add hosts in active cluster with CVS, I get the message that CPU hardware must support CVO.

  In the BIOS, the only option I have found is Intel VT, and activate.

  The hosts are G5 blades HP.

  Thank you...

  Here are the bios settings that I use on blades BL680c G5 and BL460c G1 running ESX 3.5 and CVS works very well

  Integrated Serial Port disabled

  Virtual Serial Port disabled

  Integrated NIC: Boot Options disabled

  For Proliant power regulator Mode static High Performance HP

  Processor options: HW Prefetcher disabled

  Processor options: sector Adjacent Prefetch disabled

  Processor options: No.-Execute memory Protection enabled

  Options of processor: Intel Virtualization Technology active

  Processor power and the use of monitoring disabled

  No.-Execute memory Protection that is required for the VCA, other parameters are just performance tuning.

  Remember that you can not activate EVC cluster that already has ESX hosts on him. Create new cluster, select CVS and drag your ESX hosts old cluster to the new cluster, this is how you can activate CVS already production use ESX host.

• Satellite Pro P100 - how to enable Intel virtualization technology

  Hi all

  I have a Satellite Pro P100 P/N PSPA4E-00X00HEN, which I just installed Windows 7 RC.

  I desperately need to run Virtual PC 2007 (other versions do not work) on this subject, but he wants that Hardware-Assisted Virtualization allows in the BIOS (Phoenix Technologies V4.70).

  I've just updated to the latest version of the BIOS, but it didn't ease for SIAS in it.
  I checked the specifications of the processor and there is no installation of Intel virtualization technology.

  From what I've read on the internet, even if the processor is capable manufacturers on the computers/laptops, in the Toshiba case, program the BIOS to their liking which will turn on or off certain functions.

  What I want to know is, it will be another update to enable virtualization or there at - it another way to do it.

  Thanks in advance.

  Hello

  To my knowledge, the use of Virtual PC 2007 does not require a virtual technology supported by the hardware (CPU).
  I have used Virtual PC and Virtual Machine on PC without the ability to VT.

  But you're right. Intel CORE2 DUO T7400(2.16GHZ) processor supports VT
  http://Ark.Intel.com/CPU.aspx?GroupID=27256

  Unfortunately my knowledge the P100 BIOS does not support the option to enable/disable VT.

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.

• The Tecra 8100 with a CD - RW or a dvd upgrade

  Hello
  I'm a bit of a beginner, but I hope it's a simple question - can I put my tecra 8100 with a CD - RW, or combo dvd cdrw drive? I think I've read enough to know about changing caddies & Hubcaps etc - I don't know which drive would work - SD-R2102?
  Any help gratefully received. !

  Concerning

  Tony

  I also have a toshiba tecra 8100 and I use the cdw/dvd toshiba sd-r2612 and its perfect works
  I can play the dvd movie and burn cd

  Greetings
  RAF

• problem with intel proset & atheros and M30X

  Hello

  I have problem with Intel PROSET. When I opened this program can't do anything just because my Wireless 2200 BG is not be listed in "network components. Moreover in Atheros I'm not able to do anything as well. It can suggest the problem with the driver, but I managed to connect to my friends wireless net. What can be wrong?

  I have my own installation of Win XP SP2 with all drivers and programs of Toshiba tools & utilities. (I had the same problem with recovery of victory)

  Thank you in advance for your help!
  Happy user of T M30X

  Hello

  I guess you have INTEL Wireless Card. After installation of SP2 to check if there is some conflicts in your device manager. You can update driver for the wireless card. It is always good. :)

  As BOB said go to https://eu.computers.toshiba-europe.com (then adapter & download of drivers and downloads).

  It is driver for your Intel (V. 8.0.12.9000W2BG) wireless card. Install it and check is there no conflicts in Device Manager.
  If this is not the case, turn your wireless card and FN + F8 to enable the wireless connection.

  If you re router wireless works correctly and if your WLAN has a name you see now. I know it's sometimes very complicated to establish the connection, but you must try all the options.

  Please let us know if you are creating your successful login.