How to assign a drive letter, or make a visible existing hard drive?

Similar Questions

• How to assign different drive letter in the new hard drive?

  My hard drive for OS window is broken, which is the C: drive, so I buy a new HARD drive, but my original D: drive become a C: drive and new HARD drive is assigned with drive E:, I can't restore my Ghost in new HARD drive image, because the image is restored in the C: drive only.

  Anyone have any suggestions on how to assign different drive letter under cmd?

  Thanks in advance for your suggestions

  Hi oem7110,

  Follow the steps in the article.

  How to change drive letter assignments in Windows XP

  How automatically assign a drive letter by using the Diskpart.exe command on a Windows Server 2003-based computer or on a Windows XP-based computer

• How to assign a drive letter on a Portable device?

  I have a Canon Digital Rebel XSi and I am on Windows 7.  I would like to have the images automatically copied to my hard drive, when I connect the camera.  When I connect the camera via USB, it shows fine in portable devices.  The problem is that the path is Computer\Canon EOS DIGITAL REBEL XSi.  I can't get any third-party software to recognize as a path valid (because it does not begin with something like F:\), I can find no way to get Windows 7 to assign a drive letter to the camera directly.

  Is it possible to assign a drive letter to the camera or get a third-party software to recognize Computer\Canon EOS DIGITAL REBEL XSi as valid a path?

  Hello

  In addition to the response of Gaurav;

  Please follow this guide to change the drive letter and restart once fact: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• How to make a visible USB hard disk for a virtual machine on ESXI 4.1?

  Hi all

  As I am new to the world of vmware ESXI, I always make mistakes or I don't undertand all therefore be complete :-).

  So I have a HP Proliant ML 350 G6 Server installed with ESXI 4.1 and I want to connect a USB hard disk to a virtual machine (SBS 2K 8). Currently, the virtual machine is not able to see the hard drive.

  I already add a USB controller to the virtual machine, but my USB HARD drive is still not visible to my virtual machine.

  Can you help on that?

  Thank you

  Michael

  Next, add a USB device to the virtual computer (in the change settings tab), there are different things, USB controller and USB devices. Sometimes, you may have to restart the virtual machine.

  Greetings

• How do you assign a drive letter

  Original title: device how to assign a drive letter and or put the drive to statius online or mount a big drive to a literate player that is visible

  I have 13 terra of large drives hard and other flash drives, cards readesrs in sys I added a 3 disc terra 2ned which is not visible for terra 16 connected but its not addressable says its offline, but it is connected and 'work prpoerly' how can the system put in place to see the added disk and use the space?  a smaller drive can be removed and replaced?  or this one mounted on a different drive letter

  ?

  The provided Windows tool is disk management in the applet of the Control Panel administrative tools. Click Start-> Control Panel-> administrative tools-> management-> disk management computer.  Then locate the drive in question.  Right-click, and then click paths of access with the drive letter Change.

  If this does not work, you can try it free Easeus Partition Manager that you can download at http://easeys, com.  I got lucky with this program and Windows 7.

  I hope this helps.  Good luck.

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• Assign a drive letter to a USB hard drive

  How can I assign a drive letter to a USB drive so that it is always the same whenever I plug it to make backups etc.?

  Thanks, Martin

  Plug in your device and wait for it to be recognized.  Open a command prompt (click the start ORB, then all programs, then Accessories, and then right-click the command prompt icon and select run as administrator). In the command prompt, type diskmgmt.msc, and then press ENTER.  Find your external drive in the list in the disk management window and right click and select "Change Drive Letter and paths", assign the drive letter, you always want to have.

  "MartinCC8" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I assign a drive letter to a USB drive so that it is always the same whenever I plug it to make backups etc.?

  Thanks, Martin

• Cannot assign a drive letter using the Vista Disk Manager.

  I read these latest solutions possible, but here's my problem.  I need to connect directly a 3.5 drive I pulled a SIN of hammer to my laptop running Windows Vista... because I need to recover a folder deleted this drive 3.5 with software that only works on the directly connected motors.  Software of network recovery might work, but it seems too expensive for just the recovery of this folder.  I connected the hard drive directly via the USB port.  The system tray sees the device, but the Explorer is and of disk management to assign a drive letter is greyed out.  Please help with assigning a drive letter.  There is only one user on the laptop which is also the administrator.  Thank you!

  In my view, that Hammer NAS units are based on Linux. Therefore, the drive is probably _not_ formatted with a filesystem Windows reads/writes. Making it very difficult to recover the folder removed since all things you could do to convert to NTFS, say, will also make little probable that you can recover deleted files. Eventually, you could use one of the Linux flavors running from a DVD, for example, Ubuntu and recover the file by using a Linux tool or set the drive on a Linux machine.

  Tom

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Assign the drive letter?

  Hello

  As my rocket was working well after going through the washing machine... I just bought a 2 GB Clip +.

  It works OK, but in contrast to the "rocket", he is not assigned a drive letter. On the contrary, a 'portable' dialog box appears when I plug the thing into my XP host, I select "Open the device to view files" and a window pops up that says: "My to Clip + 2 GB" I can drop files to copy to the device.

  I didn't install the applications on the CD of Sansa: this would assign a drive letter of the Clip + is connected?

  Thank you.

  Simple. Go to settings > system settings > USB Mode and set it to the MSC (Mass Storage Class).

• Windows 7 does not assign a drive letter

  Windows does not automatically assign a drive letter to one of my discs usb hard or flash drives, if I go into disk management utility disk is still sitting there in line and assets and all I have to do is right click and assign a drive letter and everything works as usual. However, it is super annoying and there is no reason windows should not do this for me. I assure you there is no disc corrupt driver problems, jumpers or whatever it is out of whack, I'm a computer programmer myself. I just never fell on the situation and could not find an answer after looking here for 20 minutes and Googling autour and check other sources.

  Thanks for the help

  Open the command prompt

  type diskpart

  automount enable

  problem solved :)

• My lg800g phone shows connected to the computer but is not assigned a drive letter

  My lg800g phone shows connected to the computer but is not assigned a drive letter

  Hello

  You can manually assign the letter.

  Check out the link and check if that helps.

  Change, add, or remove a drive letter

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• Windows 7 don't recognize the existence of the second drive hard unformated. How can I format drive's system does not recognize that there is so I can format the drive to use for backup?

  The two HDD are identical, WD750GB. Cannot find how to format a drive unreconized in help.
  First HARD drive is SATA and using 64-bit format and want to use the same for the second.

  Run Disk Manager , format the drive and it assign a drive letter:

  1. press the Windows Logo + R , type diskmgmt.msc in the box, and then click OK .
  2. right click on the drive and click format .
  3 right-click the disk, and then click change drive letter and paths .

  I don't know what you mean by "using the 64 bit format".

• How to assign a keyboard macro to a keyboard shortcut

  Does anyone know how to assign a keyboard macro to a keyboard shortcut?  I'm spoiled CodeWright by, if there is no selected item only when a 'Ctrl c' is issued, CodeWright automatically copy the line that the cursor is located. I'm trying to replicate this feature and the only way I can see it's a macro of the "copy line" keyboard right click on command.  Any thoughts?

  NABI:

  Looks like you're talking about modifying the source code.  I don't know a way to create your own keyboard macro.  You can change the shortcut key assignments (CVI 9.1: Options-> change the shortcut keys), but it seems that you need more than that.

  To make your example (a line no copying), I often have to press Ctrl-O, to cut the current line, immediately followed by a Ctrl-V to restore the original line.  This line is still in the buffer zone of the Clipboard, so I can go where I want the copy of the original line and press Ctrl + V.

  In the event that you do not change the code but create shortcuts for your users in your application, you can catch the EVENT_KEYPRESS in your panel or command callback callback and check for key code combinations.  See the multikey.prj example program comes with CVI and the CVI for EVENT_KEYPRESS help.