Windows 7 don't recognize the existence of the second drive hard unformated. How can I format drive's system does not recognize that there is so I can format the drive to use for backup?

Similar Questions

• How can I lock you an iPad for backup for iCloud?

  To use iCloud backup, iPad should be in charge (I understand), in the range of wi - fi (I understand that too) and 'locked '. What is locked? If the case is closed, the screen goes black - I always called this 'sleep' - it's locked?

  Yes - if AutoSave is not the case you can force one through settings > iCloud > backup > Back Up Now

• The system does not find that the specified path 0 error 80070003 - Win7 x

  Puzzle: Running Win7 backup in Windows 10. At the end of the backup, I get the following message:

  "Your last backup was not completely successful. Your unsaved files. "This leads to an error as follows:" the system cannot find the path specified error 0 x 80070003 - Win7. And this error message refers to a directory that had been reinstalled some time ago.

  The moved directory is very well in his new position, and was well backed up in this very backup. I figured somewhere there is still an old reference to the former location of the directory, but I can't find such a reference. Can't find it in the file Explorer and can't find it in the backup utility that allows you to select the files and folders to back up. File Explorer and backup are proof that this directory is now in a different place that has indeed been saved.

  If, as is the case, I can't find the above specifications in the expression "the path specified" (in other words, the reference wrong), how can I delete or change? How can I say Backup and Restore to ignore this directory ghost?

  (BTW: I ran chkdsk /f /r yesterday, as part of something else, and according to the chkdsk command, everything is fine, no problems at all.)

  Pending the entry I will delete this particular backup and run it again to see what happens. Thanks in advance for your suggestions as to what I could try it now.

  Re-create the missing directory, a dummy replacement.

  This can be useful:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  John

• Can Toshiba 500 GB external HARD drive - I use for backup?

  Hello.

  Can I use my Toshiba 500 GB external drive that is currently back up My Documents via the Microsoft files history * also * as a hot spare for the enjoy backup & recovery?
  Currently, the external drive has 346 GB free.

  Thanks Howard
  Warwickshire, United Kingdom

  Why not be honest the backup & recovery from other manufacturers of portable computers are not known to me, but you can store and back up all files on the HARD drive.

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• I use my windows live mail and password and now I don't remember the password I used someone can help

  I have a Dell Inspiron 3542 and there a lock screen and I use my windows live email and password, and now I don't remember the password I used someone can help? For now, I use my Dell Inspiron 1545 to my back upwards

  If the computer is on an Internet connection, you can reset the password on the Windows Password Reset site.  If the PC is not online right now if that won't work because it doesn't 'knows' the new password.

  If there is another user account on the computer that has admin access, you can use it to reset your own password from the control panel.

  If there is no other user accounts, there are a built-in backup Administrator account, but for security reasons, you can only get to Safe Mode.

  I wrote a blog where I explain how to make each of these options: http://cmdrkeene.com/reset-forgotten-windows-password

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I installed ux 16 driver Windows 7 my pc but nothing displays, no .so tracks what is wrong with it please suggest.or how can I do this by using midi for the first time.

  I installed driver ux 16 in my widows 7 and connected to my pc but nothing displays, no .so tracks what is wrong with it please suggest.or how can I do this by using midi for the first time.

  In the subject line, type a brief description of your problem or your question. A subject line that says only "Hi alll" not will receive the attention of someone who can be familiar with your particular situation.

  Contact the support of Yamaha.

• My reading and writing system does not recognize the DVD. For this CD. I don't know why.

  For a long time my system CD/DVD in my laptop Del Estudio 1537 worked perfect. But all of a sudden my computer does not recognize or read or burn DVDs. Can you help me fix this problem?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• When I click on the + to open a new window I don't like the images that arise. I tried to change that in all: config; Browser.newtab.URL, but it will not

  When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?

  Thank you

  If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.

  You can open the page in Firefox Add-ons using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  Hello hodginswill,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  https://windowslivehelp.com/product.aspx?ProductID=5

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Recover the database by using cold backup

  Hi all

  One of the table is deleted accidentally by one of our DBA of PROD. We have a backup to cold on a day before.

  Now, we try to restore from the backup to cold. DB PROD is in archivelog and all the archives are in tact.

  The resulting table truncated today at 20:00. We can apply the database until 20:00 so that we can restore the table truncated using cold backup.

  Please find the steps we use to restore below.

  create controlfile

  from the db in State of Mt.

  recover the database;

  It will ask for last log archive when we try to get it back.

  ENV details-

  DB - 11.2.0.1

  Please suggest.

  Thank you

  create controlfile

  from the db in State of Mt.

  recover the database;

  This method is not correct. Here are the four steps for incomplete recovery (which is what you need):

  Mount the database

  restore all data files

  recover the database up to the...

  ALTER database open resetlogs

  Your DBA (who say you was responsible for the error) will be familiar with the routine. Or it should be.