How to assign dynamic identifiers generated manually to the components of the adf

Similar Questions

• How to assign an address mac manually via the SDK

  Hi all

  I want to add a NETWORK card to an instance of a computer virtual via the API vSphere for Perl with a MAC address of 'me '.

  I don't want, assigned to the vCenter by the MAC automatically, which is the default value.

  I am frustrated because I have not found anything in the internet.

  Can someone help me?

  Thanks in advance,

  Henning

  You will need to call the ReconfigVM_Task specify a specification of the configuration of the addition of a new type device VirtualEthernetCard and when you add the new vNIC, you have the option of specifying how the MAC address will be generated: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.vm.device.VirtualEthernetCard.html you will need to set the addressType to manual and macAddress at the MAC address string you want to set , remember that the MAC address must be in the range of 00:50:56:00:00:00 - 00:50:56:3F:FF:FF

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How to assign a constant name 'letter' to the USB port?

  My Compaq Presario with Windows 7 has two USB ports on the front and on the back.  I use both to the front to connect a drive hard ext to the back, usb flash drives and a camera. Everytime Iplug in the disk hard ext, the PC assigns a letter to port such as J.  The next time I plug the camera into the same port, the PC gives it a different letter and I need to go back up and reconfigre Norton where to back up.  How to assign a constant name 'letter' to the USB port?

  I think that the previous answer may have been cut off, but they were right. You assign it a letter on the USB port, you assign a letter to the device. With your drive plugged, if you right-click on the computer icon and select manage you will arrive at the computer management screen. Click the disk management icon and you should see your drive listed. Right click on that and you should see a choice to change the drive letter and path. From there, click change and select a drive letter for your device.

• How to assign a tab set manually

  Hello
  I created the form on table with report. My page of the report shows the tab set, can someone advice how to assign tab manually set to a page.
  I tried to edit report page and tabs in the section Adding shared component, but it looks like it is not the right place because it allows to add the article for the game tab and not the value tab page.
  
  Thanks in advance
  
  Aalishan

  Aalishan salvation,

  On your page, click "Edit Page attributes" in top right section of the Page. There, check the setting "Tab Standard Set" - it should point to the game of the tab you want to use.

  You can also check, thanks to shared components tabs, the tab itself to display the page number for your report in the context of the "tab Page" page

  Andy

• Assignment of identifiers automatically or using the value of basic in the rules

  The question is quite simple. I want to order the instances of an entity. How these bodies are classified are of no importance. The problem is that the only information available on instances of the age, which may be one of several bodies and makes impossible to order. Is there any way to assign an identifier automatically apply this ranking, say 0... the number of instances - 1 or is - it possible to use the value of an instance of rules?

  A loop is a bad choice here - a recursive function would end in the same logical dilemma on the tie-break as you you. (If I can offer any advice it would be that the rule loops should be a last choice as a general rule, not a first, they are certainly not as easy to manage as recursive functions in a standard programming language).

  Essentially, you want to work on the price of the ticket (IE an attribute at the level of the entity of ticket):

  the price of the ticket =
  0; If the number of tickets more expensive than me + number of tickets as well as me<= number="" of="" free="">
  nominal value * number of tickets I have to pay for my price/number of tickets, the same value as me; If the number of cheaper tickets than me < number="" of="" free="" tickets="" and="" number="" of="" tickets="" more="" expensive="" than="" me="" +="" number="" of="" tickets="" same="" as="" me=""> number of free tickets
  otherwise the price of the ticket face value =

  where the number of tickets I have to pay for my price = number of cards of the same value that me - (free tickets - number of cheaper tickets than me)

  As I said, you can use alleged relationships to help you work on:
  number of cheaper tickets than me
  and
  number of tickets as well as me

  Published by: Sean Reardon on April 11, 2013 08:35

• How/where to store more information page in the ADF?

  Hi all
  
  What is the best way to fill the managedBean during the loading of the page?
  
  In my application, I have a page fragment that displays the details of the user of Webservice DataControl. I have and drag the data to the pageFragment webservice control. This fragment has mapped in the taskFlow and the annex taskFlow in to JSPX homepage as a region. I need to store such user information in any place (ManagedBean / or any other better place to store) that I can use at my request along, because I won't run again whenever the webservice to get the same information from the user. Also, I want to collect and store this information while I give back to the homepage, not after any action of the user.
  
  Please advice how & where to store the information in the ADF? Can I create a managedBean? If so, how to trigger this class method on page load?
  
  Thank you
  KLN

  Hello

  in this case, you configure the managed bean to be within the scope of the session. Then, on the first page, you set a stage for restoration after phase listener (it is a beacon in the f: view element). This is phaselistener refers to the bean managed using EL (important). She can do by using an expression of the method in JSF. For example, if the managed bean had a populateUserInfo method then yu might reference #{beanname.populateUserInfo} and run the expression of the method using Java. In the managed bean, the method would be to access the link layer using the BindingContext class

  http://download.Oracle.com/docs/CD/E15051_01/apirefs.1111/e10653/Oracle/ADF/Model/BindingContext.html

  Call

  . GetCurrent () .getCurrentBindingsEntry () BindingContext to get a handle of instance active BindingContainer.

  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  Then on the container of the binding, you call the method to query the Web Service for the modules

  before calling a method on the ADF link layer, make sure that the ADF is binding for the method
  OperationBinding opws (OperationBinding) = bindings.get ("name of the method exposed on the other side");
  If you need pass parameters
  opws.getParamsMap () .put ("name of the argument", value);
  OPWS. Execute();

  You can use similar code to access the information of the user of the iterator method in the ADF to complete managed bean fields. You can access user information from the bean managed through getter and setter methods

  Frank

  PS. : I know that the description is a little rough. I'll see if I can find a sample of blog at a later date

  Published by: Frank Nimphius, 26 January 2010 17:43

• How to assign a macro key to type the email address?

  How can I assign a macro key to type my email address?
  A lot of sites that use under the user name email address required. 24 characters is a lot of typing.
  My OS is Windows 7 Home Premium.

  Try the extension of cuts:

  • Press clippings: https://addons.mozilla.org/firefox/addon/clippings/

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• How to remove IMM2 CIM membership manually on the server in a Rack? / XClarity

  I'm looking for the troubleshooting steps when we are deleting subscription IMM2 CIM by LXCA.

  I found the document following infocenter, however there is no specific measures to remove the subscription from the CIM.

  http://PIC.DHE.IBM.com/InfoCenter/Flexsys/information/index.jsp?topic=%2Fcom.Lenovo.lxca.doc%2Faug_p...

  Does anyone know the other manual removal steps that 'Factory IMM2 reset default'?

  Thanks for the comment!
  You know the information of the namespace in your case to remove IMM2 cimsubscription? We have not cimsubscribe (field Director) in the XClarity environment, but I would try with cimcli.

• How to assign an initial value by using the driaver or traditional?

  Hi all

  the question is quite simple: I use PCI - 6014 with driver OR traditional DAQ (so far). I have a device connected to a set of things to do in order to provide for a grouping, which selects the operating mode. As soon as the device is triggered and I initialize the DIO, I attribute the initial values BD. The problem is that it takes a while (approx. 15 ms) to do, and during this time (between the initialization of the devices and the initial assignment) the combination of output is one level 0, which is highly undesirable because of the specificity of the device. Is it possible to "encode" the initial values of the things to do, so that, as soon as data is turned on, and the line is declared as DO, it automatically receives the pre-defined value?

  Thank you in advance,

  Mike

  Have you read the card? The answer is no.

• How to upgrade acer liquid e2 manually with the zip file

  I need help for a reason, he used let.me updated live so I need help manual update

  You need Acer recovery, not MCG.

• How to disable dynamically interactive report filed in the page master detail

  I use APEX 4.0 & very new to APEX. I am not able to disable a class in area of detail (which is an interactive report) of a master detail Page.
  I want to turn off the field in a row based on the value of another field of recording, like set_item_instance_property of the oracle forms. Please help me.

  See {message identifier: = 10743324}

• How to change dynamically using visa without stopping the program of baud rate?

  Hello, is there a way I can change the speed of read/write VISA on the fly?

  Please let me know.

  Thank you

  
  

• How to insert entire atg command manually via the sql DB script?

  Hello group,

  I have the obligation to insert command entire atg in db for purposes of unit testing.

  I appreciate if someone can help me in this.

  Thanks in advance,

  Satya.

  Hi Satya,

  What is the purpose of import new orders in db,

  Are to be tested and you large orders need as samples.

  I think that the table of patterns is not updated because

  (1) u could have used commerceItemId Similarly, if no new trade item will be created.

  (2) u could have changed its trade item id, this Id might not be present in the database, so at the time of importation not found this element in the repository, so left this area under vacuum in order of db.

  If you want to add new item of commerce id in the order, you will first need to create it.

  To create the sql or xml command, you need the following minimum elements:

  (1) item trade

  (2) profile id

  (3) certain relationships

  Now, after this conversation, I start thinking it's a good idea to create the command through automated scripts.

• [ADF, JDev12.1.3] How to manage cookies (configure/create/read) in the ADF applications?

  Hallo,

  I would like to create a cookie in my ADF application.

  To start I used the code shown in this thread code example for create / read a cookie value? but the cookie seems to not be created.

  It is not present in Firebug or it can be retrieved by the code.

      Cookie userCookie = new Cookie("myCookie", "hello");
      userCookie.setMaxAge(-1);
      FacesContext ctx = FacesContext.getCurrentInstance();
      ((HttpServletResponse) ctx.getExternalContext().getResponse()).addCookie(userCookie);
  
  
      Cookie retrieveCookie = (Cookie) ctx.getExternalContext().getRequestCookieMap().get("myCookie");
      if (retrieveCookie != null)
        System.out.println("My cookie is: " + retrieveCookie.getName() + " " + retrieveCookie.getValue());
  

  What's not in the code?

  There may be something to confiure in the application of the ADF?

  Thank you

  Federico

  1. Cookie userCookie is new Cookie ("MyCookie", "Hello");.
  2. userCookie.setMaxAge(-1);
  3. FacesContext ctx = FacesContext.getCurrentInstance ();
  4. (Ctx.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ()) .addCookie (userCookie) (HttpServletResponse);
  5. Cookie retrieveCookie = ctx.getExternalContext () .getRequestCookieMap () .get ("myCookie") (Cookie);
  6. If (retrieveCookie! = null)
  7. System.out.println ("my cookie is:" + retrieveCookie.getName () + "" + retrieveCookie.getValue ());

  Is - this code is run from the same method in java?

  If this will not work (cookie is added to the http response if you can't get this until the next http request arrives)

  Dario