How to associate policies crypto with tunnel-group?
Hi, when I review the configuration of the VPN from point to point, I have a question. The ASA has three peer-to-peer VPN configuration. So, there are also three groups of tunnel in there. My question is how each VPN to ensure encryption policy tunnel-group? In the anther Word, what encryption policy associated with tunnel-group? Thank you.
This is the phase 1, they work from top to bottom. When you try to negotiate the tunnel between two counterparts, in the background, they send all of your policies and according to which is first (from top to bottom) is used.
For example.
If your counterpart device uses (3des, md5, pre-shared key and group 2), it will not match the policy 1 and the rest of the policy will not be considered.
Kind regards
Sandra
Tags: Cisco Security
Similar Questions
-
Enable ASA 9.1 problems with tunnel-group-list
Hello!
I try to get a working configuration where the Cisco VPN / DTLS phones VPN connect, while allowing access remotely via client AnyConnect of PCs. I have two groups of tunnel and configured for this purpose of group policy and use Group-URL.
Phones are connect very well, but I don't get the drop down menu to choose between the two groups of tunnel when connecting to a remote computer.
An excerpt from the config.
Moreover, I had the menu work previously when I used group instead of group-URL aliases. However, the phones seem to require the URL group. Now that I have those configured, the menu does not work. If I get the full URL in the AnyConnect window, both URLs work, and I can connect.
Thank you in advance for any suggestions you may have!
Deb
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
AnyConnect enable
tunnel-group-list activate
ABC Group-Policy internal
ABC Group Policy attributes
value of server WINS 10.10.16.17 10.10.16.12
value of 10.10.16.17 DNS server 10.10.16.12
VPN - connections 3
SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless
Split-tunnel-policy tunnelall
field default value abc.com
the address value AnyConnectPool pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
time to generate a new key ssl AnyConnect 1440
AnyConnect ssl generate a new method ssl key
AnyConnect client of dpd-interval 5
dpd-interval gateway AnyConnect 30
AnyConnect ask none
internal strategy of group ABC - STG
ABC - STG group policy attributes
value of server DNS 8.8.8.8
VPN - connections 3
SSL VPN-tunnel-Protocol l2tp ipsec client ssl clientless
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Split-Tunnel-encrypt-ACL
field default value abc.com
the address value AnyConnectPool pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
time to generate a new key ssl AnyConnect 1440
AnyConnect ssl generate a new method ssl key
AnyConnect client of dpd-interval 5
dpd-interval gateway AnyConnect 30
AnyConnect ask none
type tunnel-group Split-Tunnel-Group remote access
attributes global-tunnel-group Split-Tunnel-Group
address pool AnyConnectPool
Group Policy - by default-ABC-STG
tunnel-group Split-Tunnel-Group webvpn-attributes
allow group-url https://asa.abc.com/ABC-STG
tunnel-group ABC - Tunnel - type remote access Group
attributes global-tunnel-group ABC - Tunnel - Group
address pool AnyConnectPool
Group-ACTIVE DIRECTORY authentication server
Group Policy - by default-ABC
password-management
ABC - Tunnel tunnel-group - webvpn-attributes Group
allow group-url https://asa.abc.com/ABC
Hello
You can have group-alias and group-url at the same time in the configuration so that the phones can connnect with Group-url and users can click on the drop down menu to select the right connection profile.
tunnel-group
webvpn-attributes
Group-aliasenable
Group-urlhelp Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
How to associate an index with a foreign key constraint
I understand how to associate a primary key constraint or a Unique key constraint index...
Yet I don't see how to associate the index of a foreign key constraint. Is this possible?
Thank you
Bob LarsenHi Bob,
In Data Modeler, physical model for Oracle primary and unique keys dialog boxes offer an Index field using, which is used to generate the 'using_index_clause' in the DDL for primary and Unique key constraints.
However the Oracle Database DDL does not have the "using_index_clause" for Foreign Key constraints, thus Data Modeler does not provide this feature for foreign keys.So, you will need to create a separate Index that uses the same columns as the foreign key (using the index page of the table properties dialog box in the relational model).
David
-
How can you fill ListBox with channel group name dynamically?
I built a GUI in the 'View' pane that acts as a large table of contents. At the top of the GUI, there is a list box I want to dynamically fill with Group channel names loaded in my data portal (internal data). I can't generate the necessary code to do this. Currently, I use a ListBox control. Can I use an EnumListBox instead?
The purpose of the list box should allow fast loading data which must be analysed in several sheets (also in the part of 'View') for comparison side by side rather than drag and drop data into each individual record.
Any help would be appreciated,
Thank you
~ Nathan
Attached is a screenshot of the GUI I hope it helps.
Hey Nathan--
Have we met yet? Don't think that I will remember to see you post on the forums of tiara so far (or remember you I meet someone named Nathan in person recently). Welcome to the forums of tiara!
There are a few things that you need to change about your code snippet-
- The reason why you get the error "object required: ' [string: 'filename']' is because the Set command expects that the right side of an expression returns an object (you define your variable to)." In your case, you return a string (the name of a group), not an object. Simply remove the Set command.
- The ListBox.Items.Add () method requires two parameters - the first is the text of the item to insert in the list, and the second is a value to assign to this point (you can do single).
As a result, to more directly match your code snippet to the labour code, follow these steps:
Dim listNum, names
We = 1 to GroupCount
Name = GroupName (listNum)
Call selectData.Items.Add (names, we)
NEXTNote that you can also use object programming oriented with the data object that represents the data portal, it is easier for you to avoid remembering variables such as GroupCount and GroupName DIAdem (that's me):
Dim listNum
We = 1 to Data.Root.ChannelGroups.Count
Dial selectData.Items.Add (Data.Root.ChannelGroups (listNum). Name, we)
NEXTYour project is looking great - let us know how we can continue to help and keep us updated!
-
How to associate a tag with vAPI
Hi guys,.
I'm trying to associate a label vCenter for some virtual machines using the vAPI interface into orchestrator.
I found the object of 'com_vmware_cis_tagging_tag_association' with the attach method. The input to the method parameters are tag_id (String) and object_id (com_vmware_vapi_std_dynamic_id).
I found a way to get the tag_id but I wasn't able to get the object_id. How can I get an object of the type ""com_vmware_vapi_std_dynamic_id "of a VcVirtualMachine? "
Thank you.
Hello
Here is a code example (dynamic creation of ID is on lines 33 to 35). It also shows how you can search a VM using vAPI, if the VC:VirtualMachine object is not available.
// Input parameters // endpoint - vAPI endpoint // vm - VC:VirtualMachine (optional) if (endpoint == null) { throw "'endpoint' parameter should not be null"; } var client = endpoint.client(); var vmid; if (vm != null) { // VC:VirtualMachine input parameter is provided; get VM ID from it vmid = vm.id; } else { // Find VM by name using vAPI; you can find it also by other properties var vmsvc = new com_vmware_vcenter_VM(client); var spec = new com_vmware_vcenter_VM_filter__spec(); spec.names = ["your-vm-name"]; // replace with the name of VM you wan to find var found = vmsvc.list(spec); if (found == null || found.length == 0) { throw "No VM found"; } if (found.length > 1) { System.log("Multiple VMs found; will use the first one"); } vmid = found[0].vm; } // Attach the tag var tagsvc = new com_vmware_cis_tagging_tag__association(client); var tagid = "urn:vmomi:InventoryServiceTag:63c7dd25-af15-4020-9c9a-6490b4c5f40b:GLOBAL"; // replace with your tag ID var dynid = new com_vmware_vapi_std_dynamic__ID(); dynid.id = vmid; dynid.type = "VirtualMachine"; tagsvc.attach(tagid, dynid);
-
How to associate a webservice with ADF Model-ViewController App
Hello
I have an ADF Model-ViewController application, created in the role of merger Application developers in Jdeveloper.
Now, I would like to associate this application, an instance of the Web service, which I already have in a jar definition adflib.
Basically, an instance of this Application that runs on WLS need to have a corresponding web service instance running. (1. 1 relationship)
Is this possible using the configuration files? Or is it possible to start this web service programmatically?
I want to use this web service to talk about this application of WLS field side. (by an application that is running on an other WLS)
I want the definition of the web service in this application.
And this application will be deployed to Weblogic Server as an ear.
Thank you
Jean Claude
Published by: user10124649 on December 17, 2009 08:29You can publish your AM with a web service interface see:
http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/bcextservices.htm#CJAJGIEBIf you want to be deployed as a separate application, just create a new application in JDeveloper and bring the same BC ADF Model project that you have in it.
-
When I open a new tab, there is a blank page. I would like to a browser to load into a new tab, instead of having to click a browser after I opened the tab.
Firefox and IE are web browsers, where Google and Bing are the search engines.
By default, Firefox has a blank page when you open a new tab, which can be changed with a few different extensions.
https://addons.Mozilla.org/en-us/Firefox/addon/NewTabURL/
Place it just to any web page or a page of search engine as you want to see in a new tab. -
How to associate cluster esx with the data report store
Hi all
I'm running a repore that displays data stores less than 50 free concerts. The storage team would like a coloum for esx clusters associated with the LUN. I can't see to find it and what is possible.
Thanks in advance,
Scott.
I would create a WCF function, script type, with a timeRange parameter and a new data store VMWDatastore context parameter, required, not a list. Set the output in common: string.
Add the following script:
QS = server. QueryService
Query = "!" "VMWCluster where esxServers.datastores.uniqueId = ' ${datastore.uniqueId}"
cluster = server. QueryService.queryTopologyObjects (query)
clusterNames = clusters? collect {cluster-> cluster?. name}?. Join(', ')
return clusterNames
You can then use this in your report, feeding the entrance of context for the current row data store.
-
Hello
I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:
Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:
% ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
% 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
% ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
% 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
% ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
% ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
% ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroupSo, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?
Please help me!
Kind regards
Fernando Aguirre
You can use the group certificate mapping feature to map to a specific group.
This is the configuration for your reference guide:
http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978
And here is the command for "map of crypto ca certificate": reference
http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685
Hope that helps.
-
How can I associate a font with many styles appears as a police
How can I associate a font with many styles appears as a police? I have quite a few fonts, which, instead of appearing as a police unique with different font styles (bold, bolditalic, medium, light...), each style appears in the dropdown font as a separate policy. Anyway I can fix this?
Another font question, is possible to group my fonts in the drop down menu under different categories such as "favorite san serif fonts" or "script font"?
You can not. That's what the creator of police must adjust. If they do not have
Set it up properly as one family, it will appear as a separate font
in InDesign.
What we are talking about the police, incidentally?
-
How to associate a .fp file with a .lib file?
Hello
How to associate a .fp I create in the ICB with a .lib (i.e. not a .c file) file so that I can create a range of service to go with an external library that I can disseminate to third parties through a .dll file? The help file seems to hint that this is possible, but I don't understand how to do. Pointers?
Thank you.
The association is done automatically: If you have a .lib file with the same name as the file .fp, in the same location as the .fp, CVI will use the .lib file as the program of the .fp file, even if there is also a .c file with the same name.
You can check what program file is attached to the instrument by selecting Edit tool from the context menu of the instrument in the tree of the Instrument of the workspace window, and then clicking the button information display.
Luis
-
the following example shows how to associate with a WAP to a Cisco router access point:
! http://www.Cisco.com/en/us/docs/routers/access/1800/wireless/configuration/guide/s37wep.html#wp1037774
! universal client configuration example for encryption of the ARS + TKIP, WPA - PSK:dot11 ssid test10
open authentication
authentication wpa key management
WPA - psk ascii 7 11584B5643475D5B5C737B
outputinterface Dot11Radio0/1/0
DHCP IP address
encryption ciphers aes - ccm mode
SSID test10
station-role nonroot
outputHello
If you need instead of WPA WEP... Here is the config...
dot11 ssid test10
open authentication
outputinterface Dot11Radio0/1/0
DHCP IP address
mandatory encryption wep mode
1 size 40-bit encryption key
SSID test10
station-role nonroot
outputLet me know if that answers your question and please do not forget to note the useful messages!
Concerning
Surendra
-
How can I really associate .as ActionScript with Flash Builder file in Windows 8?
How can I really associate .as ActionScript with Flash Builder file in Windows 8?
In Windows 7, you have to go to preferences - Flash Builder - File Associations, etc. There is no file Associations in the Windows 8 version: (see image)
Adobe made a web page that indicates that you must use Windows Explorer to associate FlashBuilder.exe .as files, but it does not work: http://helpx.Adobe.com/Flash-Builder/KB/unable-set-default-file-associations.html
FlashBuilder.exe does not support opening a file .as like that. Flash Builder attempts to launch a new process and requires a different workspace to be able to open a Windows file. So either Adobe should add support for binding to the Windows 8 file in Flash Builder, or it must be a setting that prevents the Flash Builder to open a second instance of process.
I found a solution. I used a Windows 7 machine that is the file association appropriate and observed the key of Windows registry using regedit.exe. I exported the key and made a .reg file and copied on my machine Windows 8. After installing registry keys, the associated file did not immediately because Windows 8 has this key to the user choice that always associates the file .as with Flash Professional. So after installing the underside of the keys, then I used Windows Explorer to associate files with Flash Builder .as and my file associations work as expected. It is an Adobe specific integration problem that must be fixed on the end of Adobe to support file associations in Windows 8.
Success as follows:
(1) install the registry keys below
(2) use the Windows Explorer to always associate FlashBuilder.exe .as files
========================================================================================
copy the below into a file with the .reg extension. Then use the "Merge" command to Windows Explorer to install in the registry
========================================================================================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.as]
@= "FlashBuilder.ActionScript".
[HKEY_CLASSES_ROOT\.as\ShellNew]
"NullFile"=""
[HKEY_CLASSES_ROOT\FlashBuilder.ActionScript]
[HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\DefaultIcon]
@= "C:\\Program Files\\Adobe\\Adobe Flash Builder 4.7 (64 Bit)\\eclipse\\plugins\\com.adobe.flexbuilder.ui_4.7.0.349722\\icons\\fb_as.ico.
[HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell]
[HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell\Open]
[HKEY_CLASSES_ROOT\FlashBuilder.ActionScript\Shell\Open\Command]
@= hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 20,.
00,46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 41, 00, 64, 00, 6f, 00, 62, 00, 65, 00, 5 c, 00,------.
41,00,64,00, 6f, 00, 62, 00, 65, 00, 20, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68, 00, 20, 00, 42,------.
00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 00, 20, 34, 00, 2nd, 00, 37, 00, 20, 00, 28, 00,------.
36,00,34,00,20,00,42,00,69,00,74,00,29,00 5 C 00, 46, 00, 6 C, 00, 61, 00, 73, 00, 68,.
00,42,00,75,00,69,00, 6 c, 00, 64, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00,------.
20.00, 2d, 00, 6F, 00, 61, 00, 6 d, 00, 65, 00, 20, 00, 22, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68,.
00,20,00,42,00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 22, 00, 20, 00, 2d, 00, 2d, 00,------.
6 c, 00, 61, 00, 75, 00, 6F, 00, 63, 00, 68, 00, 65, 00, 72, 00, 2nd, 00, 6f, 00, 00, 65, 70, 00, 6e,------.
00,46,00,69,00 6 C 00, 65, 00, 20, 00, 22, 00, 25, 00, 31, 00, 22, 00, 00, 00
[HKEY_LOCAL_MACHINE\SOFTWARE\.as]
@= "FlashBuilder.ActionScript".
[HKEY_LOCAL_MACHINE\SOFTWARE\.as\ShellNew]
"NullFile"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript]
[HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\DefaultIcon]
@= "C:\\Program Files\\Adobe\\Adobe Flash Builder 4.7 (64 Bit)\\eclipse\\plugins\\com.adobe.flexbuilder.ui_4.7.0.349722\\icons\\fb_as.ico.
[HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell\Open]
[HKEY_LOCAL_MACHINE\SOFTWARE\FlashBuilder.ActionScript\Shell\Open\Command]
@= hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 20,.
00,46,00,69,00 6 c 00, 65, 00, 73, 00, 5 c, 00, 41, 00, 64, 00, 6f, 00, 62, 00, 65, 00, 5 c, 00,------.
41,00,64,00, 6f, 00, 62, 00, 65, 00, 20, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68, 00, 20, 00, 42,------.
00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 00, 20, 34, 00, 2nd, 00, 37, 00, 20, 00, 28, 00,------.
36,00,34,00,20,00,42,00,69,00,74,00,29,00 5 C 00, 46, 00, 6 C, 00, 61, 00, 73, 00, 68,.
00,42,00,75,00,69,00, 6 c, 00, 64, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00,------.
20.00, 2d, 00, 6F, 00, 61, 00, 6 d, 00, 65, 00, 20, 00, 22, 00, 46, 00, 6 c, 00, 61, 00, 73, 00, 68,.
00,20,00,42,00,75,00,69,00 6 c 00, 64, 00, 65, 00, 72, 00, 22, 00, 20, 00, 2d, 00, 2d, 00,------.
6 c, 00, 61, 00, 75, 00, 6F, 00, 63, 00, 68, 00, 65, 00, 72, 00, 2nd, 00, 6f, 00, 00, 65, 70, 00, 6e,------.
00,46,00,69,00 6 C 00, 65, 00, 20, 00, 22, 00, 25, 00, 31, 00, 22, 00, 00, 00
-
How can I associate a button with two slices?
Hello
I need help please. How can I associate a button with two slices? or combine the two slices to make one cut or make a form of true polygon on the edges, it will make to the polygon, but it leaves the red lines and I cannot work under this installment... If you understand. Someone help please. Thank you very much.Two points.
First of all, I see that you have forms stars in your image, but that does not mean that you need a star-shaped slice. You can use a little square that is centered on your star. That could make it easier to create your slices. All you have to do is drag lines of leaders in the left seat and superior, two pairs around each star and then drag a slice from one end to the other.
Noting that brings me to my second point: images must be rectangular. If you want to change the L-shaped area, then you need to swap two images, not one only. This is perhaps why you cannot have the buttons under the threshold of upper sliding of your L shaped section. Because Fireworks needs to make a rectangular image, it is by default in an area that encompasses the range - area you can not the buttons in. It is the lock area non cut which still need to be part of the image, since the part will swap, too.
-
How one manually associate the file with an application types?
I recently installed the Adobe Digital Editions software to download an e-book I bought. It will not open in ADE, and the manual of the ADE advises me to "manually associate the" types with the application of the EPUB files and the subsidies agreement. 'See the instructions for your operating system for associating file types'. I can't find the instructions for it anywhere. HELP, please.
Support cat either does not!
Click context (right click) on the file and the menu should give you one option 'Open with' - at the end of which is 'Other' - which should allow you to engage in the type of file you want
Maybe you are looking for
-
I have an iMac 2010 with processor quad core i5, 8 GB of ram with internal superdrive and a LaCie 22 x usb dvd burner that has worked well, however, after the installation of El Capitan, I have lost the two discs, nor are recognized in disk utility,
-
Purchased unit 4 years, for backup purposes.Performs no model or serial number. Assume that the part the DEVICE is out of service, unit no - more - seen by XP system; After weekly use.Tried other ports and USB cables.I would like to open the unit to
-
I gave up my Ipad and slightly bumpy a corner, now part of the sgreen does not work
I gave up my IPad and slightly bumpy a corner, now part of my screen does not work and the screen continues to change without touching anything.
-
Is it possible to make the background of a transparent SVG document? The opacity value doesn't seem to work on the document itself?
-
BlackBerry smartphones, I can't go into the Blackberry world HELP!
Hey when I downloaded world BB on my BB Curve(8520, RIM, OS 4.5) and I get this error message:The data Service only is not operational please help me