How to avoid the backup files in Finder Searches

Similar Questions

• How to decrypt the backup file

  Hi all

  I need to know how to decipher the backup file (ACS 5.3) on the desktop. Below is relevant for once you import the file to restore. However, my problem is to extract the file to your desktop

  ============================================================

  GBA backup encryption

  Backup of the ACS is now encrypted using a password of dynamic encryption. The user is prompted for an encryption password when executing a backup operation. ACS encrypts only the ACS data by using a dynamic encryption key. CARS and the ACS view data is encrypted using a static key. That is why ACS invites to enter a password for encryption when you perform a backup that contains the data of the ACS. The user is prompted for a password for decryption while restoring a backup that contains the data of the ACS.

  When you run a backup in ACS, ACS uses the static to encrypt key the CARS and the ACS data and actually a file of .gpg while GBA backup data is saved inside this file as file separate .gpg .gpg using the dynamic encryption password. When you restore the full backup, ACS invites for the decryption password decrypt the backup ACS data. ACS decrypts the data from CARS and display ACS data using the static key.

  The encryption password must have:

  • a minimum of 8 characters
  • no more than 32 characters
  • letter at least one capital letter.
  • at least a tiny.

  «Special characters are allowed except "'", "$", "(" et "") "» ACS displays the password strategy if the entered password does not meet password requirements.

  ===========================================================

  for people who would ask "Why I want to do this": it's policies related audit password standards

  Hello

  I can't think about a way to recover your files, it's to restore the file to a temp ACS server can generate a backup that is not encrypted.

  I would say we can decrypt the file on your desktop if we know the method that was used to encrypt it. I think that this information is not provided anywhere in the doc of cisco.

  Kind regards

  Amjad

• How to hide the backup files?

  I think that in some way after changing some settings (which I don't remember and can't seem to find), my files appear all the backup copies of the files in the folder, each of them bears the name of: "backup of __.wbk _ (file name).

  How to hide these backup files (as I believe that they had always been until I made this change)?

  It is Version 5.1 Service Pack 3, Windows 2007

  Tim

  Hello Tim0123456,

  I suggest try to perform a system restore to a point before the changes.  Please let us know status.

  System Restore: Windows XP

  http://support.Microsoft.com/kb/306084

  This article describes how to use the System Restore tool to restore your computer to a previous state. System Restore takes a "snapshot" of critical system files and some program files and the registry settings and stores this information as restore points.

• Captivate - interrupted due to the error. How to recover the backup file?

  While the work on Captivate, I met this error message.  I was not able to save the project, I was working on when this error came.

  

  How can I recover the project upwards? Where is file '.cpbackup '?

  Enable you the creation of backup in the preferences? If so, you should find

  the backup file in the same folder as your normal projects.

• How to transfer the backup files in my c: drive overloaded?

  Original title: maintenance.

  How to transfer files from my c: drive backup overloaded somewhere else in order to free up space?

  Hello

  1. What backup files you want to transfer? You try the files backed up using Windows Vista backup and restore?

  You can visit the following links and check if it helps:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  How to back up or transfer your data on a Windows computer

  http://support.Microsoft.com/kb/971759

  Hope this information is useful.

• How to restore the backup files of XP to Windows 8?

  I have all my XP data backed up using the backup/restore in XP.

  How to restore for Windows 8.

   
   
  (Microsoft: you told me to back up my XP data before the upgrade.) Fact!   You not me is not to use your own installation of backup.  Let programmers design the code yet?)
   

  There is a downloadable utility for windows 7 that will read and extract archives of backup of xp. I don't know if it will work in Win8, but even if it isn't, it may be easier to find a Win7 machine...

  Here is the tool and the info from Microsoft:

  http://Windows.Microsoft.com/en-us/Windows/restore-backup-created-previous-version-Windows#1TC=Windows-7

• How to remove the backup files in the rescue and recovery on local drive

  I need more space on my hard drive and for a year have been backup to a drive for expansion.  However, I kept the base and a backup on the local drive. I tried to remove the base backup, since it was listed in "show all the backups" on the "local" drive However, it still appears in 'show all the backups' - in the local drive.  I see now that I actually deleted the 'base' on the USB. I see no way to delete the backups in the local drive. How can I delete the backups to the local disk?

  RNR does support only 1 location of target, in your case, local backup or USB.

  If you change the location to the USB, it will ask "delete backups on Local.  If you say no, it will keep local backups and start on USB. View backups should ONLY list target current place of residence.  In your case, USB.  You said delete Basic, yes he deleted based on USB.

  Go to the RNR, menu, advanced and post a screenshot of the view backups.  Do not use the main pane.

  (1) change the local location.  You can remove LOCAL.  Then replace location USB.

  (2) uninstall the RNR.  This will remove \RRbackups on drive C.  Replace.

  The main panel (simple opinion) may use registry values to list all backups while the Advanced menu should list ONLY the target location.

• How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive

  How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.

  In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))

  Hello

  I suggest you to follow the steps in the article below and check if it helps.

  Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281

  Hope this information is useful.

• BlackBerry Smartphones to find the backup files to restore to the replacement unit

  I have problems to find where the Blackberry Desktop Manager is to store my backup files.  A search on my computer for .ipd files shows nothing.  I did a backup of my original device and wants to restore the contacts, calendar, and photos.

  Edit: After another attempt at original device backup and restoring the device the Desktop Manager has the restore button grey replacement.  In addition, the device PIN reads "zero" with unit replacement set.

  Thanks, the third try was the charm.  The Documents folder was there and the PIN has been finally recognized and restore is complete.

• I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to avoid the FDM-command being moved files from the OpenBatch folder

  Hello world
  
  I have a little problem with Batch Processing of the FDM - I need to stop the movement of files in the folder OpenBatch - when a batch is executed.
  
  The installer by using the Task Manager, a load a Batch Script and Script integration all works very well. However, the process must run every 3 hours, so I need the file "A_LedgerTransLocation_Actual_nov - 2013_RR.txt" to remain in the \Inbox\Batches\OpenBatch\ folder at any time.
  
  How to avoid the file is moved?
  
  
  Best regards
  Frederik
  
  
  
  
  PS: I noticed on the OTN Forum is it may be possible to script a solution such as:
  
  FSO1 = CreateObject ("Scripting.FileSystemObject") set
  Set File1 = FSO1. GetFile ("FDM Directory\FDM Application\Inbox\Batches\Openbatch\A_LedgerTransLocation_Actual_nov-2013_RR.txt")
  The BATCHENG value. PcolFiles = BATCHENG.fFileCollectionCreate (CStr (strDelimiter), File1)
  
  However this is not possible, as the controllers of the company need to edit the. TXT file themselves. They will not be able to edit the script too.

  I don't think you can prevent the FDM, move the file. I'm assuming that the file change in each period to use the last period of POV, so I think that option easiset to copy the file (based on a part of the name (location?) to a temporary location before began the FOM and write again later.)

• Lost bookmarks do not recover, system shows "failed to process the backup file ' how to solve?

  The ability to access saved previuosly bookmarks disappeared recently. I work in the system to get a restore from an earlier date (10 files appear), but to all the world I get the message - Impossible to treat the backup file - I think that this has coincided with a recent update. Are you able to help?
  Carl

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

• Restoration of the backup files is not HD

  Microsoft window came up with message that my HD was 'BAD', and I have to back up the files and replace HD.  I chose the option to back up all the files on a flash drive.

  I have now replaced the HD and run the recovery discs.

  When I insert the flash drive it contains a file 'OWNER-PC.'

  Open this file, there is another file: "Backup Set 2010-11-01..."

  Open this file, I find: "backup files 2010-11-0.

  This file contains 19 files: "Save files 1" by "backup Files19".

  Each of these files contain files and each of them contain files.

  What is the best way to restore my files of the tree of which I guess are compressed files.

  Hello

  ·         How you back up files?

  ·         You use the backup program in Windows?

  If Yes, then you must restore the backup files to view.

  Here's how you can restore backup files: http://windows.microsoft.com/en-US/windows-vista/Restore-files-from-a-backup

  If you did the backup windows of the computer, and then follow the steps of: http://windows.microsoft.com/en-US/windows-vista/Restore-your-computer-from-a-system-image-backup

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The backup files are smaller in size after ACS ACS 5.2 to 5.3

  After ACS upgrade from 5.2 to 5.3 we have noticed that the backup files are significantly smaller in size. They were for example before the upgrade:

  285633099 2011-10-23 22:01 Meduza-ACS-111023 - 2200.tar.gpg

  285809254 2011-10-24 22:01 Meduza-ACS-111024 - 2200.tar.gpg

  And after the upgrade:

  124234429 2011-10-25 22:00 Meduza-ACS-111025 - 2200.tar.gpg

  124234425 2011-10-26 22:00 Meduza-ACS-111026 - 2200.tar.gpg

  What could cause this behavior?

  How can we be sure if the backup files have been regular after the upgrade?

  So what I wrote is true, but does not apply in your case

  I think that there are also a few corrections that reduce the size of the transactions table. GST files relate to records associated with configuration changes and manage notification of these secondary changes, and run-time components. Transactions are stored in the configuration database, but contain no configuration data.

  5.2 what they have not well cleaned and it has improved to the point 5.3.

  Impossible to find all the CDETS at the moment, but here's an example;

  CSCth78269 Table ACSTRANSACTIONS is not properly cleaned during bulk operations

  As you can see it before the upgrade that the size of your backup file has been more and once the size of constant upgrade

  I think you should be good. Only way to confirm 100% is to restore data

• size of the backup file

  Hello

  on 10.2.0.3 on Win 2003, I backup database using the control file.

  I try the following query to find the backup file size:

  Select sum(blocks*block_size) /(1024*1024*1024) from V$ BACKUP_DATAFILE where completion_time > sysdate - 6/24

  SUM(BLOCKS*BLOCK_SIZE) /(1024*1024*1024)

  ---------------------------------------

  115.328506

  1 selected line.

  For me, it is about 115 GB. But I only 18 GB disk. Where I'm wrong?

  Thank you.

  How many backups you have taken in the last 4 hours?