size of the backup file

Similar Questions

• The backup files are smaller in size after ACS ACS 5.2 to 5.3

  After ACS upgrade from 5.2 to 5.3 we have noticed that the backup files are significantly smaller in size. They were for example before the upgrade:

  285633099 2011-10-23 22:01 Meduza-ACS-111023 - 2200.tar.gpg

  285809254 2011-10-24 22:01 Meduza-ACS-111024 - 2200.tar.gpg

  And after the upgrade:

  124234429 2011-10-25 22:00 Meduza-ACS-111025 - 2200.tar.gpg

  124234425 2011-10-26 22:00 Meduza-ACS-111026 - 2200.tar.gpg

  What could cause this behavior?

  How can we be sure if the backup files have been regular after the upgrade?

  So what I wrote is true, but does not apply in your case

  I think that there are also a few corrections that reduce the size of the transactions table. GST files relate to records associated with configuration changes and manage notification of these secondary changes, and run-time components. Transactions are stored in the configuration database, but contain no configuration data.

  5.2 what they have not well cleaned and it has improved to the point 5.3.

  Impossible to find all the CDETS at the moment, but here's an example;

  CSCth78269 Table ACSTRANSACTIONS is not properly cleaned during bulk operations

  As you can see it before the upgrade that the size of your backup file has been more and once the size of constant upgrade

  I think you should be good. Only way to confirm 100% is to restore data

• "Failed to process the backup file" - bookmarks JSON file

  I deleted my appdata files without thinking and then allowed my trash. When I opened firefox again all my favorites have disappeared. I used piriform recuva to find my deleted files and recover the backup JSON files 10 bookmark. When I try to restore my bookmarks, I get the message "failed to process the backup file". "Files are 95 KB in size, but when I open them with Notepad that they are empty, however, when you use the Restore tool, it is said ' elements of 480", which I assume is the amount of bookmarks, I had, which means that firefox can see data. The same happens for all ten backups that I recovered.

  Any help would be appreciated.

  What is the name of this file?

  Firefox can only look at the file name for the number of items.

  • < number > _ < hash > .json bookmark-YYYY-MM-JJ_

  The files in the bookmarkbackups folder are currently in compressed format .jsonlz4 (i.e., they show data binary like a ZIP compressed archive) and cannot be easily unzipped for access the JSON text format.
  The files are compressed means that a single error in the file will make it impossible to unpack the file.

  Have you checked all the available JSON backup to see if everything works?

  A backup created manually JSON is always not compressed, so can be easily inspected or opened in a text editor (Notepad > "Pretty Print"), but with a compressed file, it is much more difficult.

  Recovery of a file via an undelete utility is no guarantee that the space occupied by the file has not been used by another file, and so is corrupt.

• As a Time Machine backup, it keeps adding to the size of the backup?

  TM starts the backup and starts suddenly to add to the size of the backup, it will do. This means that no player will never be large enough to accommodate the backup because it keeps growing in size (as each block of data is added, the size of the backup continues expansion of the same amount). I have attached 2 screenshots showing what has happened in the minute to restart the backup. TM is backup on an external WD hard drive via the USB-3 port on my MacBook Pro (retina, 15 inches, end of 2013). 1.9 TB of data backup - there should not be a problem because the external hard drive has 3 TB of space and has been freshly formatted before being used for the first backup on this drive. As you can see from the screenshots, the backup is much larger than it should be.

  

  1 minute later screenshot:

  

  Before this behavior, I have had problems with Time Machine while using another backup drive (a drive LaCie Quadra) with for example, ignored backups, backups landed at calculation time, backups, partially blocked by a backup for more than 36 hours etc., error messages from read-only TM etc... I tried several solutions on this forum and none seem to have corrected these strange behaviors. It felt like I've solved a problem, shortly after another was about to begin.

  I stopped finally try the solutions suggested here in the forums, as well as some external sites such as Pondini and chose to use another drive (HD freshly cleared using disk utility - the WD drive that is currently attached to the MBP). The WD external drive worked well on the Mac Pro in the office, and I have no reason to suspect that this is the problem (I ran some tests after erasing it and there is no error reported).

  Well, the first symptom that something still was wrong was when backing up to disk WD has slowed to a crawl yesterday afternoon, but I left it on overnight. At noon today the backup was still running, but about ⅔ complete (very, very slowly - running data blocks are moving into very small pieces), but I have to bring the MBP to a meeting and everything stop. Then my back and everything by plugging, TM started upward and all seemed well, until I noticed that the backup data was almost 2.5 to. I restarted the MBP. It's once again, I noticed that Time Machine did not work as I expected. The size of the backup continues to expand... I was expecting TM that she had about 250 GB left to save, but as see you from the screenshots it much much smaller than that. I have let it run like that for about 2 hours, hoping that it was just a small mistake, but the HD continues to fill, only 185 GB of space left. Strangely, I can enter TM and see my data.

  Suggestions please? Very much appreciated.

  Stu

  Nobody answered, so I thought I'd share the temporary solution I came up with.

  I started in safe mode, deleted the backup external TM drive I was using and launched a full backup with TM (always in safe mode). I leave TM turn all night and a full backup has been completed. I rebooted, entered TM and restore some files to confirm that I was actually able to restore the backup pieces. Since that time, I did have problems with TM make scheduled backups, with one reading errors etc.

  I will continue to spend some time to know what triggered these questions... since I was able to make a backup in safe mode, this means that I have other avenues to explore.

  I will report back if I find anything.

  Stu

• Purge of the records of the Table and the size of the data file

  11.2.0.4/Oracle Linux 6.4

  We want to reduce the size of the DB (file size of data), so that our RMAN backup size will be reduced. So, let's create stored procedures that will purge old data in huge tables.

  After you remove records, we will decrease the tables using the:

  change the movement line of table ITEM_MASTER enable;

  change the waterfall table retractable ITEM_MASTER space;

  ALTER table ITEM_MASTER deallocate unused;

  The commands above will reduce the file size of data (see dba_Data_files.bytes) or it will reduce the size of the segment?

  Only the segment formats will be reduced.  Oracle has never reduced the sizes of data file automatically.  You would have to reduce them.  You may not be able to reduce the size of data file if there are extensions to the 'end' (highwatermark) data files.  In this case, you will need to create a new tablespace and move all the objects for the new tablespace OR export, drop, create tablespace and import.

  Hemant K Collette

• How to know the size of the backup through POS image

  Hello

  After you have configured vShpere Protection data, I run successfully backup jobs, but I can't find details on employment, the size of the backup image.

  is it possible to get it?

  I think that with the POS, it is pretty easy, I don't even know what the speed of the backup, backup image format, etc..

  To connect to vCenter through thick client. Select the POS device and goto tab «Tasks & Events»

  Now find the backup job id - see attachment file for reference.

  Now ssh to the POS device and run the following command. / * Don't forget to provide the id of the backup job in the command * /.

  grep-i "Logging" to/usr/local/avamarclient/var-proxy * /* vmimage?. Journal

  The command output contains the path of the log file of origin for the backup, which should contain complete information.

  Capture of the info from my log file (that you might want to watch)...

  2013-03-25 03:47:27 avvcbimage Info <9752>: Performance: 11221,9 MB/minute
  2013-03-25 03:47:27 avvcbimage Info <9753>: duration: 00:03:39 (+ 00:00:00 idle/load/preparation)
  2013-03-25 03:47:27 avvcbimage Info <9754>: VDDK IO 9229.00 MB, Performance: 5954,2 MB/minute, duration: 00:01:33
  2013-03-25 03:47:27 avvcbimage Info <9755>: Avamar deduplication entry 9229,00 MB, Performance: 4429,9 MB/minute, duration: 00:02:05

• Big increase in size of the backups after upgrade

  Hello

  I updated my database of 10.2.0.4 on win2003 SP2 for 11.2.0.1.0 SE SE on win2008 R2 SP1 64 - bit, by making exp/imp

  The amounts of size databasefiles up to approximately 150 GB on each server

  But when I do a normal RMAN backup of the data files to the new database (database backup device type disk); I get a backupset that is 78 GB in size.

  On the old database, the backup size was only 36 GB

  Two data are substantially the same, and I don't think I'm using the compression on any one of the database backups. I listed the RMAN settings below

  Can someone tell me why I see this huge increase in size of the backups?

  Best regards

  Klaus Mogensen

  10 GB RMAN settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default

  SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE;

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE the FORMAT of DISC TYPE CHANNEL DEVICE "C:\backup\vtrack\backupset\ora_df_%Y_%M_%D_%T_%t_s%s_s%p.bkp";

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default

  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SNCFVTRACK. ORA'; # by default

  11g RMAN settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default

  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default

  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' E:\ORACLE\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFVTRACK. ORA'; # by default

  That is why,

  Configuring your channel 10g device:

  SET UP THE DEVICE TYPE DISK BACKUP FOR PARALLELISM BACKUPSET TABLET 1 TYPE

  Configuring your channel 11g device:

  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default

  The 11g, 10g being compressed backups are not.

• Cannot reduce the size of the VMDK file

  OK, here's my story:

  I started with the growable virtual 40 GB HD default mapped as C:\ on my virtual machine. The HD received complete and had poor performance and I converted it to a prealloue 100 GB HD. It worked OK for a while, but then I created a new virtual HD mapped as D:\ to store data.

  So my problem was C:\ was too big which made backup of the virtual machine of your time, and I thought I have to resize C:\ 30 GB. My first test was to convert it to a HD growable. This remains a 100 GB on the host vmdk file.

  Then, I used the two compacts from the GUI and stop at the command prompt on the convert HD Nope, still 100 GB vmdk file on the host.

  Then I used a disk management program to reduce the size of the c:\ partition with 30 GB and run both shrink and compact again. Guess what, the vmdk file is always 100 GB.

  I'm running out of ideas on what to do to reduce the size of the vmdk file. Any ideas?

  Yes, I did, but I used compact from the GUI and stop at the command line (vmware - vmdiskmanager.exe). At that time I didn't there's a shrink option in VMWare tools.

  In this case try to diminish with the extra partition (temporary).

  Which converter you were referring to in your previous post?

  VMware Converter Standalone 4.3

  André

• Size of the backup set

  Hello
  How to choose the size of the backup set? Small or large? What would we be better? We have the archivelog 250 MB. Size of the backup set for archivelogs is 300 MB. Is it enough or we should change? The bandwidth and the number of the Chanel play a role too?
  Thank you.

  Hello

  If you are askig for your logs archiving that is only 250 MB, so you need to have several channels and don't worry abt the size of the backup set for that much archive logs,

  You must take into account the channesla when you are in large number of saved data files.

  Kind regards
  Navneet

• When I try to restore my bookmarks I get the message "Failed to process the backup file."

  I lost my favorites and when I try to get back them, I can see the backup files in the recover window, but when I try to restore my bookmarks I get the message "Failed to process the backup file." Can help you? Thank you

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• My Favorites are lost and Firefox can not restore from backup with this error msg "Unable to deal with the backup file.". Someone please help.

  I use Firefox 12 on my Macbook Pro, it crashed and when I rebooted, all my favorites have disappeared. When I tried to restore from the backup files, he returns with "Failed to process the backup file." Someone help please I would have lost years of bookmarks.

  Thank you

  Hi guys,.
  I also experienced this problem and based on the previous explanation in one of the threads here I got the following article - http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  I myself have deleted only the file places.sqlite and places.sqlite.corrupt from the profile directory and was able to import my favorites since the backup file successfully.

• Lost bookmarks do not recover, system shows "failed to process the backup file ' how to solve?

  The ability to access saved previuosly bookmarks disappeared recently. I work in the system to get a restore from an earlier date (10 files appear), but to all the world I get the message - Impossible to treat the backup file - I think that this has coincided with a recent update. Are you able to help?
  Carl

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Update the BIOS of the A110 to satellites--&gt; the size of the ROM file is incorrect

  I tried upgraing BIOS download from Toshiba site but error message.
  The size of the ROM file is incorrect - suggestions for moving forward.

  Hello

  Today, it seems it's your lucky day...
  Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help you

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.