How to backup / copy all photos to icloud on external hard drive?

Similar Questions

• Copy of photos and vidoes on external hard drive to Windows import

  Hello world

  & Thank you in advance for your help!

  I want to export my external library from the Photos App on a hard disk and then import them under MS Windows.

  The library contains photos and videos. So far, I have tried two ways:

  1 copy the entire library on an external hard drive

  2. in the Photos app, select all the pictures and videos to YouTube and copy on the external hard drive

  However, no matter what I tried not all my photos and none of my videos have been exported.

  Can someone help me please!

  Thank you

  Alex

  Here you have a guide for moving files from Mac to Windows PC: http://www.laptopmag.com/articles/move-mac-files-windows-pc

  Make sure that your external drive is formatted in BOLD ex.

• How can I copy all the content from my old hard drive on my hard drive again?

  My old PC is on its last breath and I decided to replace it. I bought a new more powerful PC and thought that by installing my old hard drive (Windows 7 on a Sata Drive) be simple and give me all my current programs without the need to install again. Unfortunately, my new PC refuses to recognize the old drive and I need these programs. How to copy all the contents of a new (bigger hard disk) without loss of functionality.

  Any help greatly appreciated

  Original title: old to new hard drive

  Remove the old drive, (just unplug its cables) reboot the PC, it does not start?

  If the method of connection of the old drive was at fault

  (Or bother readers origonal connections when you installed the old disk)

  BTW, you can not use the old drive as primary boot on your new PC drive, or you can access all the programs that have been installed on this subject.

• How can I copy video to a DVD on my hard drive in Windows XP?

  Original title: not a wiz here pc... How can I copy video to a DVD on my hard drive... I have windows XP?
  need help please... thank you in advance.

  If the DVD is "not" a commercial copy protected DVD...
  the following steps may be worth a try:

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is located in, and then select Explore or open to view the
  Directory of the DVD.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video from .wmv to for editing.
  (Note: in Windows 7 you may be able to import the)
  VOB files in Movie Maker just as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• I accidentally deleted all the shortcuts to my external hard drive, how do I restore them?

  When I was cleaning up my computer, I accidentally deleted all the shortcuts in my external hard drive and now can't access what has been stored on my external hard drive, movies, music etc... I used glary utilities at the time of the household

  Try a restore point to an earlier period by using this utility

  And on the device, any yellow warning Manager?

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• Backup of files under XP on an external hard drive

  How can I back up my files to an external hard drive.  Used to be able to do direct care. But now that went THAT XP does not have this function.

  Hello

  Use the Replicator which makes it easy to restore one, some, or all the files.

  Replicator - free
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Backup and restore does not recognize my external HARD drive.

  When I try to use the ms backup and restore it only recogniza my external HARD drive.

  Is that possible reinstall or repair?

  Hello daniloalvesmaciel,

  Thanks for posting on the Microsoft answers Forum.

  First of all, I could check and see if the hard drive is listed on the Windows 7 Compatibility Center. Clickhere for a link to the Compatibility Center. If it's on the Compatibility Center, then check out the web site of the manufacturer for updates or drivers.

  Then check if you see the external hard drive in the Device Manager.
  To check these options:

  1. click on the Start button to display the Start Menu , then selectControl Panel .
  2. the Control Panel window opens.
  Now click system and security from this window.
  3 Scrollfor Device Manager.
  4. click on the Device Manager.
  5. to view material click on any category and the associated list of installed hardware. For example. Click on hard drives.
  Right click on the external hard drive. You can see the different options likeUpdate driver software, disable, uninstall and properties etc.
  6. click on Properties to display the details of the hardware. Click theDriver tab , to view the details of device driver.
  7. then on the software update driver to check and see if you have the latest drivers.

  Then check again and see if you can save on the external hard drive.

  If this is not the case, try to map a drive to the external drive. Can you back up now.

  Please respond and take stock of your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...

  Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Are there any newspaper in my system or on the server to which data copy from my computer on any external hard drive?

  HII guys,
  Are there any newspaper in my system or on the server that the data that are copy from my computer on any external hard drive?

  No, there isn't, but it might be possible to implement through the audit.

• How backup complete photos and catalog on external hard drive?

  I want to backup my entire LR library on an external drive for security. I want the backup to include photos as well as all the metadata of. I can't do it, and I can't find a similar question and answer on the forum. I am able to 'Export' pictures on my external hard drive, but the metadata file that gets exported is unreadable.

  Please advise me how to do this simple and necessary procedure. Thanks in advance.

  Two steps to be completed-

  1. When you close the Lightroom program you should let make a backup of the CATALOG . OFTEN!

  This is defined in the catalog preferences [Ctrl + Alt +] [Ctrl/Cmd + Alt + comma]

  

  The catalog stores everything you do in the Lightroom program! including metadata.

  AND save backups of the catalog to another physical disk (NOT in the same folder as the Lightroom program!)

  2. your original images must be 'Backed-up' or copied to a second location on a different physical drive your chosen method (and not by Lightroom)

  Mac users can use {Time Machine}, PC users can use {SyncBack, Free File Sync, etc.)

  * It is usually not necessary to 'Export' all images unless you have a specific purpose - for example to post on Facebook, Pinterest, web page, printer, etc..

  There is no object in the export of images from archive on your computer, if Lightroom has a catalogue of work!

  

• I propose all the photos on a new external hard drive.  Now, all records have a question mark in them.  How can I find all THE PICTURES at once instead of having to find each photo. I have about 30 000 photos. In Mac Help. LR5

  I've implemented a new external hard drive and Im trying to redirect LR to the new hard drive. I have over 30,000 photos and Im trying to see if there is a way to pictures located without having to go through each folder at a time

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  See Figure 4