How to block the ip or the port? Linksys BEFSR41 V3

Hello everyone im in need of help. I'm trying to block an ip address or a port from my router. I really want to get into the story on why I'm doing this, but for a good cause.

So, far I don't know were to start on how to do it and I hope that you guys would help me through it. I am currently runnin firmware 1.04.11.04.17 7

Thank you!

The BEFSR41 router interface based on web Access ther.

Go to security. the filter page.

On this page, you can block internal users to access the Internet by entering their IP address.

You can also block any request to the Internet at any particular port #.

Or you can enter a MAC address from the internal user you want to block from the Internet.

I think that these options should give, you want you want.

Tags: Linksys Routers

Similar Questions

  • How to block the port with esxi5?

    is it possible to monitor Protocol on vps all this creat byy vmware esxi?

    like to have us add some filtering for all vps and prevent from using port 25 or...

    Just to make sure that I understand. Are you referring to virtual machines with 'vps '?

    ESXi only includes a firewall because it of own OS, but not for the VM networks. In order to monitor or block traffic, you must implement your own firewall. Depending on your configuration (single host or cluster), it can be a VM (e.g. pfSense) firewall with two uplinks, where it is connected to your network and the other on a host only vSwitch, jointly with others - being watched - VMs.

    André

  • How to block the site from the db with Mozilla?

    How to block the site from the db with Mozilla?
    I noticed this file is blocked by some customers of Mozilla. Is this possible to Mozilla software and security settings?

    On another machine it works but the other cannot be connected to the database. This puts inside Mozilla technical possible?

    See:

  • I can't figure out how to open the port of CD.

    * Original title: CD player

    I can't figure out how to open the port of CD. There are no buttons, and online forums have not helped. Any suggestions?

    Of course - just go on this PC (or computer) and r / click on the DVD/CD drive - you should see "eject" as shown below. Usually there will be a button in the center of the disc too... but sometimes well hidden tray! -Ric.

  • How to follow the port on my router ipstar

    How to follow the port on my router ipstar

    Nothing to do with Windows.

    (1) read the help/documentation that accompanies it.
    2) go to the ipstar website and look for information.

  • How to block the registration of files with a windows xp-specific extension

    How to block the registration of files in windows xp with a specific extension, example the user cannot save a file with the extension exe or mp3 or another, as management on the filtering of files, windows 2003 server, I can't find the steps for the blocking process I mean in windows xp prof

    Windows cannot do natively.  A file name is simply a file name and you can not prevent the registration of a file based on its extension.

    You can change file associations, such as a double click on a file with a particular extension will not automatically launch an application given, however, but that's not what you asked.
    You may also schedule a program to run from time to time which will erase all files with a given as well.  but until this program is executed, such a file might exist on your disk.

    HTH,
    JW

  • need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

    you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

    The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

  • How to block the automatic Flash updates?

    How to block the automatic Flash updates?  Blocking possible updates in the registry? If Yes, then how?

    These questions are in reference to a work environment where Flash updates will be deployed by SCCM.

    Please see the section 'Update' chapter 4 'Administration' in our administrator's guide - http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html

  • How to find the port # OEM?

    How to find the port # in the Oracle enterprise Manager URL (http://mydatabase:xxxx / em /). I installed the Oracle long back do not write the URL. How to find the number XXXX in this case?
    Oracle 10g R2.
    Thank you
    Smith

    emctl status dbconsole

    It's probably in 1158 or 5500 (according to the version)

    Kind regards
    Uwe

    http://uhesse.WordPress.com

  • How to configure the router Linksys DD - WRT for WVC54GCA E4200

    I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

    I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

    http://tzodns.com/support/tutorials/188

    http://tzodns.com/support/tutorials/190

    Hi Majekho,

    Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

    In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
    In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

    http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

  • How to block the popup "you are the lucky visitor" each time I open Firefox. I can't find any information in the box add on lists et al. thank you!

    Recently, my v25.0 of Firefox is faced with a problem of popup. A popup message saying ' you're visotor of luck today, please click Ok to opportunities. " I have to click Ok then I can continue to use the browser. What is a popular problem? Please tell us how to block this popup. Thank you!

    Hello

    First of all apologize for suggesting tools of Windows malware. I have noticed that you are using a Mac. Thanks to Cor - El for this note.

    On your machine, you have the following extensions. Is it possible to uninstall / disable these extensions and then try if the popup appears

    1. PIN button 1.1
    2. ShareThis Toolbar 1.300.436
    3. Shop.com Community Toolbar 3.20.0.4
    4. ShopBuddy 1.0.24
    5. Convenience store 1.1

    You can follow the below mentioned instructions [1] uninstall/disable extensions.

    In regards to Safe Mode, removing bookmarks, without this can't. That said, it is always advisable to make a backup of your bookmarks (and your profile in general) [2] so that you are able to restore from backup.

    1. Disable or remove modules
    2. Backup and restore Firefox profiles information
  • How to block the pop-up at the bottom of the screen

    I have block pop-up and most is blocked. However, I can't figure out how to block pop ups that appear horizontally at the bottom of the screen

    Hi Deansdream,

    You can try using an addon like AdBlock Plus or No Script. To install an addon you must have to tools-> Add-ons-> get modules and searching for it.


    For more information about the modules look at this article:

    Use extensions to add features to Firefox

    Please report to us.

  • Unable to block the port with pfctl(8)

    I try to block the process that is listening on the port on my MacBook Pro 9110 to simulate the network interruption.

    If I have the following rule:

    -------------------------------------------------------------------

    block fast drop on all proto tcp from any to any port = 9110

    --------------------------------------------------------------------

    My second process has communicated successfully with the port is blocked, and the client has successfully sent applications to the blocked process. The best I could achieve blocks all communications process with these lists of rules:

    ---------------------

    drop block in all

    block any waiver

    ---------------------

    However, this is exactly what I need. Am I missing something? Any commnets/suggestion will be appreciated. Here is my result of lsof command:

    > > lsof-i | grep 9110

    Java 41243 yfe 132u IPv6 0x1e7d5327e0e36555 0 t 0 TCP 192.168.1.68:58772-> 192.168.1.68:9110 (ESTABLISHED)

    Java 41243 yfe 145u IPv6 0x1e7d5327e0f43035 0 t 0 TCP 192.168.1.68:58777-> 192.168.1.68:9110 (ESTABLISHED)

    Java 41244 yfe 133u IPv6 0x1e7d5327e116eab5 0 t 0 TCP 192.168.1.68:58747-> 192.168.1.68:9110 (ESTABLISHED)

    Java 41244 yfe 147u IPv6 0x1e7d5327e0e3a075 0 t 0 TCP 192.168.1.68:58756-> 192.168.1.68:9110 (ESTABLISHED)

    yfe Java 41253 201u IPv6 0x1e7d5327e0e38595 0 t 0 TCP *: 9110 (LISTEN)

    Java 41253 yfe 278u IPv6 0x1e7d5327e0e39055 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58747 (ESTABLISHED)

    Java 41253 yfe 279u IPv6 0x1e7d5327e4a195b5 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58756 (ESTABLISHED)

    Java 41253 yfe 280us IPv6 0x1e7d5327e5560035 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58772 (ESTABLISHED)

    View the results of the next PF sanity check:

    % sudo pfctl(8) - v - n f /etc/pf.conf

  • How to block the URL of some Web sites on my network

    Dear Sir.

    I want to block some website in my network. I have 35 clients and Server 2008. How we can block the URL using Group Policy management.

    Please advise me to block the URL

    Thank you

    Forward your support more lovable.

    Faris

    Domain/server/business questions are best addressed @ Technet.  Answers is more connected consumer.

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • How to block the cell damage such as mobile?

    I need emergency aid...

    I want to block all storage devices in Windows 7.

    I've already blocked usb storage devices by changing the value of registry USBTOR.

    But the connections of portable devices as shown in my computer as mobile phones are connecting always.

    That could be very vulnerable to data loss.

    Pls help me by blocking the connection of portable devices also.

    Thanks in advance

    Hello Lucia,.

    Thanks for posting your query in Microsoft Community.

    I understand you have questions related to any storage device blocking, you are trying to connect to the computer.

    But I would like to know some more information on this issue to help you better.

    (1) are you trying to block all Bluetooth devices as well?

    (2) do not have issues using the storage device, so that you are trying to block?

    In the meantime, you can see the article mentioned below to do the same thing.

    How to disable the active USB mass storage devices?

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/25ae92d8-a2c0-46A2-A2E3-c1a831582163/how-to-disable-USB-enabled-mass-storage-devices?Forum=winserverGP

    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

    Thank you

  • How to block the sniffer of packets on the STROKE

    Hi Cisco supports,

    How can we block Wireshark.exe or other packages using STROKE sniffer applications? or what category in place?

    Thank you and best looks!

    If you want to block the file download itself, you must use file strategy that can block certain extension directly.

    There is no specific way to block the software unless it communicates online by STROKE. STROKE detects and blocks the application based on the movement of its communication.

    Rate if helps.

    Yogesh

Maybe you are looking for

  • ITunes does not sync Apple podcast app with my Nano

    iTunes does not synchronize my Apple podcast app, with my ipod nanos podcasts. The result is that if I'm half listening to a podcast on my ipod nano, and then use the usb cable for syncing with itunes, then connect my iphone 5 via the usb cable and s

  • How to contact the Apple of Afghanistan support agent

    Hello guys,. I can easily access my apple with my user account and the password, but can't make my first purchase on the app store, because it requires answers to security questions. I have not set email of rescue and have explored all possible ways.

  • create a link to the missing project file

    Hello community, for reasons beyond my control some PDF files in one of my projects have been moved on the server of the company structure and should stay there. Naturally, these files are now marked as missing in my project. I know where they are -

  • Create Express VI with numbers and types of terminals

    Hi, I am trying to create an express vi which has different numbers and types of output terminals depending on what the user selects. Can someone point me in the right direction? Anyone know where I can find examples or tutorials?

  • LaserJet_600_M602_NW_access

    Hello I have LaserJet 600 M602. How to install auth 802.1 x? When I get the name, password, server address and then I click on submit, nothing happens. I can see x auth 'successful' but 802.1 is still inactive. I also network access protection server