How to build the RejectedMessageHandler process?
Hi allI am trying to build a RejectedMessageHandler process to send the notification to the administrator if a message was rejected by the adapters.
I have read this document.
http://www.Oracle.com/technology/products/integration/adapters/PDF/Adapter_TN_004_Adapter_ErrorManagement.PDF
Then I downloaded the RejectionMessage.wsdl and the JCAErrorHandling.xsd of SOA server. Then use the RejectedMessage in JCAErrorHandling.xsd as the input type for Async RejectedMessageHandler process.
The information of rejectedMessageHandlers add in bpel.xml of my adapter test process to call the process of RejectedMessageHandler.
< property name = "rejectedMessageHandlers" >
BPEL://default | RejectedMessageHandler | launch | RejectedMessage
< / property >
The message of not formatting will go in the directory defined, but no instnace of RejectedMessageHandler has been created.
Any suggestion.
Kind regards
Kerr
OK I think I found it, as I suspected in the first post, it was with the message type
BPEL://default | RejectedMessageHandler | launch | RejectedMessage
Now if you used the xsd as previously described, try payload
for example
BPEL://default | RejectedMessageHandler | launch | payload
I'm lost as to what is the bpel process using drank that must change to RMTest.
You can check the value of the message by checking the RMTest.wsdl
He message entry will be something like
in this case the payload is the part that goes to the end.
see you soon
James
Tags: Fusion Middleware
Similar Questions
-
Adobe Acrobat Reader DC (15.010.20056) update automatically. I'd rather have the possibility to download and install or not. How to disconnect the automatic process?
Hi steveg83673202,
You cannot change the preferences of update for Adobe Acrobat Reader DC. KB doc. for reference Adobe Reader and Acrobat updater settings | DC, XI
Kind regards
Nicos
-
How to build the Applet Toolbox
Dear friends
For now, I'm starting with the applet from the Toolbox. In fact, I don't know how to build them, or run them as a demo even if I had a lot of examples on the internet.
I know that there is an IDE called Developer Suite, which is developed by Gemalto, providing the necessary facilities to write applets toolkit to build and execution. However, this tool is loaded and not free as long as Netbeans or Eclipse.
My question is: How can I build and run a toolkit applet without buy Developer Suite?
P/S: from the internet, I now sim.toolkit. * and sim.access. * two packages. Can I write a box applet tools on Notepad and use the ANT TASK packages (I know ANT is very useful) to build the toolkit to the CAP file applet? If so, how? : DHello
You should be able to process packets of the Toolbox like any other Java Card library. As long as you have the class files for compiling against and EXP to convert you files can use ANT or even the simple command line tools. Treat these libraries exactly as you would for the JC API and you should be fine.
See you soon,.
Shane -
How to plan the propagation process and/or application
Hi all
Is it possible to predict the spread and application during the Oracle Streams configuration?, I mean, I don't want to run replication online because I have other object outside the Oracle who need to reproduce within the db to get my aplication (red only) in sync.
So, when I can do? Here is an example of process apply and spread:
BEGIN
DBMS_STREAMS_ADM. () ADD_SCHEMA_RULES
schema_name = > 'shm '.
streams_type = > 'apply ',.
streams_name = > 'apply_from_db1 ',.
queue_name = > "strmadmin.from_db1"
include_dml = > true,
include_ddl = > true,
source_database = > "db1.world"
inclusion_rule = > true);
END;
/
.....
BEGIN
DBMS_STREAMS_ADM. () ADD_SCHEMA_PROPAGATION_RULES
schema_name = > 'shm '.
streams_name = > 'db1_to_db2 ',.
source_queue_name = > 'strmadmin.captured_db1 ',.
destination_queue_name = > '[email protected] ',.
include_dml = > true,
include_ddl = > true,
source_database = > "db1.world"
inclusion_rule = > true,
queue_to_queue = > true);
END;
/
Perhaps, am I is not clear to my question, or maybe I do everything in the bad sense on propagation processes and the workflow application.
So, I looked in all the documents available and I can't find how to plan the process... What is the part that I am missundertanding?
As long I have it other non Oracle objects (system files objects, we say that some objects in ECM file system related with data) to replicate with the data schema, I can't replicate any changes to the schema of the source table to the schema database of fate (automatically). So, I'm replicated ECM file systems objects in other external tool (with build-in Windows Calendar integration)... but how I can program spread and/or application treats in the middle of stream 2-way?
Please, I need a hint of someone as soon as possible.
Thanks in advance.Your question is not very clear, so here's what you need to know abot schedules DBMS_STREAMS_ADM and spread:
The schedule is done automatically when you add the spread with DBMS_STREAMS_ADM.
This API DBMS_STREAMS_ADM encompass several other APIs:-DBMS_CAPTURE_ADM,
-DBMS_RULE_ADM
-DBMS_APPLY_ADM
-DBMS_PROPAGATION_ADM.
-DBMS_AQ_ADMThis DBMS_STREAMS_ADM is supposed to make things easier, but it takes an important definition default values, so that you see all the actions that are performed as they are done quietly behind the scenes.
The establishment of the regular spread is on of these silent setting and the time that occurs with a never ending cycle to wake up/run/sleep.
The duration of sleep between 2 execution is defined by DBA_QUEUE_SCHEDULES. LATENCYFrom the spread itself, it's a job. When the next execution is set to null, he reschedule itself, like an endless loop.
Here's how the job will appear:set embedded on set heading on set feedback off set linesize 162 pagesize 0 col fail format 999 heading 'Errs' col broken format a3 heading 'Bro|ken' col sess format 9999 heading 'Ses' col jid format 999999 heading 'Job|Id' col subu format a10 heading 'Submitter' trunc col secd format a10 heading 'Security' trunc col proc format a30 heading 'Job' word_wrapped col lsd format a10 heading 'Last|Ok|Date' col lst format a5 heading 'Last|Ok|Time' col nrd format a10 heading 'This|Run|Date' col nrt format a5 heading 'This|Run|Time' col fail format 99 heading 'Err' col proc format a50 heading 'Job' word_wrapped col secd format a10 heading 'Security' trunc select job jid, log_user subu, priv_user secd, what proc, to_char(last_date,'DD/MM/YYYY') lsd, substr(last_sec,1,5) lst, to_char(next_date,'DD/MM/YYYY') nrd, substr(next_sec,1,5) nrt, failures fail, decode(broken,'Y','Y','N') Broken from sys.dba_jobs; prompt Last Last This This Job Ok Ok Run Run Bro Id Submitter Security Job Date Time Date Time Err ken ------- ---------- ---------- -------------------------------------------------- ---------- ----- ---------- ----- --- --- 55 SYS SYS next_date := sys.dbms_aqadm.aq$_propaq(job); 27/11/2009 16:19 N
Now, this work is performed in a session, always the same, which performs the actual transfer of waiting by using the global name DB link to target the area. You can check which session with the following queries:
set linesize 125 prompt set linesize 150 col queue_name HEADING 'Source|Queue Name' col queue_schema HEADING 'Source|Queue Owner' col dblink format a34 head 'Destination|Database Link' COLUMN SCHEDULE_STATUS HEADING 'Schedule Status' FORMAT A23 COLUMN PROPAGATION_NAME Heading 'Propagation|Name' format a25 wrap COLUMN START_DATE HEADING 'Expected |Start Date' COLUMN PROPAGATION_WINDOW HEADING 'Duration|in Seconds' FORMAT 9999999999999999 COLUMN NEXT_TIME HEADING 'Next|Time' FORMAT A8 COLUMN LATENCY HEADING 'Latency|in Seconds' FORMAT 9999999999 COLUMN SCHEDULE_DISABLED HEADING 'Status' FORMAT A8 COLUMN PROCESS_NAME HEADING 'Schedule|Process|Name' FORMAT A8 COLUMN FAILURES HEADING 'Number of|Failures' FORMAT 99 COLUMN LAST_ERROR_MSG HEADING 'Error Message' FORMAT A55 COLUMN TOTAL_BYTES HEADING 'Total Bytes|Propagated' FORMAT 9999999999999999 COLUMN CURRENT_START_DATE HEADING 'Current|Start' FORMAT A17 COLUMN LAST_RUN_DATE HEADING 'Last|Run' FORMAT A17 COLUMN NEXT_RUN_DATE HEADING 'Next|Run' FORMAT A17 COLUMN LAST_ERROR_DATE HEADING 'Last|Error Date' FORMAT A17 COLUMN LAST_ERROR_TIME HEADING 'Last|Error time' FORMAT A12 column message_delivery_mode HEADING 'Message|Delivery|Mode' column queue_to_queue HEADING 'Q-2-Q' col destination format a50 col sid for a4 col tot_k for 999999999999 head 'Total |Sent (Kb)' justify L prompt prompt When the duration is NULL, the propagation is active prompt When the next time is NULL, the propagation job is currently running prompt SELECT substr(session_id, 0, instr(session_id,',')-1) sid , p.propagation_name,TO_CHAR(s.START_DATE, 'HH24:MI:SS MM/DD/YY') START_DATE, s.PROPAGATION_WINDOW, s.NEXT_TIME, s.LATENCY, DECODE(s.SCHEDULE_DISABLED, 'Y', 'Disabled', 'N', 'Enabled') SCHEDULE_DISABLED, (select value/1024 from v$sesstat x, v$statname y where x.STATISTIC# = y.STATISTIC# and y.name = 'bytes sent via SQL*Net to dblink' and x.sid=substr(session_id, 0, instr(session_id,',')-1) ) tot_k FROM DBA_QUEUE_SCHEDULES s, DBA_PROPAGATION p WHERE p.DESTINATION_DBLINK = NVL(REGEXP_SUBSTR(s.destination, '[^@]+', 1, 2), s.destination) AND s.SCHEMA = p.SOURCE_QUEUE_OWNER AND s.QNAME = p.SOURCE_QUEUE_NAME and s.message_delivery_mode='BUFFERED' and session_id is not null order by propagation_name ; select p.propagation_name, s.message_delivery_mode, s.FAILURES, p.queue_to_queue, s.LAST_ERROR_MSG FROM DBA_QUEUE_SCHEDULES s, DBA_PROPAGATION p WHERE p.DESTINATION_DBLINK = NVL(REGEXP_SUBSTR(s.destination, '[^@]+', 1, 2), s.destination) AND s.SCHEMA = p.SOURCE_QUEUE_OWNER AND s.QNAME = p.SOURCE_QUEUE_NAME order by propagation_name,s.message_delivery_mode ; SELECT p.propagation_name, TO_CHAR(s.LAST_RUN_DATE, 'HH24:MI:SS MM/DD/YY') LAST_RUN_DATE, TO_CHAR(s.CURRENT_START_DATE, 'HH24:MI:SS MM/DD/YY') CURRENT_START_DATE, TO_CHAR(s.NEXT_RUN_DATE, 'HH24:MI:SS MM/DD/YY') NEXT_RUN_DATE, TO_CHAR(s.LAST_ERROR_DATE, 'HH24:MI:SS MM/DD/YY') LAST_ERROR_DATE, LAST_ERROR_TIME FROM DBA_QUEUE_SCHEDULES s, DBA_PROPAGATION p WHERE p.DESTINATION_DBLINK = NVL(REGEXP_SUBSTR(s.destination, '[^@]+', 1, 2), s.destination) AND s.SCHEMA = p.SOURCE_QUEUE_OWNER AND s.QNAME = p.SOURCE_QUEUE_NAME order by propagation_name;
If you want to change the lag time, you can use this:
-- adapt following your needs, defineds $prop (propagation name) and $latency (value in secs, usually 1 or 3 or 5) : col DESTINATION_QUEUE_NAME new_value DESTINATION_QUEUE_NAME noprint col DESTINATION_DBLINK new_value DESTINATION_DBLINK noprint col source_queue_name new_value source_queue_name noprint select SOURCE_QUEUE_NAME, DESTINATION_QUEUE_NAME, DESTINATION_DBLINK from SYS.DBA_PROPAGATION where propagation_name = upper('$fprop'); set serveroutput on size 9999 col cmd new_value cmd noprint execute DBMS_AQADM.ALTER_PROPAGATION_SCHEDULE( queue_name => 'STRMADMIN.&source_queue_name', destination =>'&DESTINATION_DBLINK', destination_queue=>'&DESTINATION_QUEUE_NAME', latency=>$latency, duration=>null, next_time=>null) ;
-
How to build the current controlled current source
I want to check my solution using multisim, however, I don't know how to build a circuit containing the current controlled current source. Hope someone can help me. Thanks in advance
.
The current direction must be placed between the the + 12V and 24 ohms resistance.
I just made the circuit and if you make the change, you will see that you are right in your calculation.
-
How to build the table with all the combinations of a source table?
Hello
I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:
Stage of Min Max name
PS1 3.0 3.6 0.3
PS2 0.9 1.2 0.1
PS3 1.7 1.9 0.1
I need to build, from this list, a table of all the combinations as below:
PS1 PS2 PS3
3.0 0.9 1.7
3.0 0.9 1.8
3.0 0.9 1.9
3.0 1.0 1.7
3.0 1.0 1.8
3.0 1.0 1.9
3.0 1.1 1.7
3.0 1.1 1.8
3.0 1.1 1.9
3.0 1.2-1.7
3.0 1.2-1.8
3.0 1.2-1.9
3.3 0.9 1.7
3.3 0.9 1.8
3.3 0.9 1.9
3.3 1.0 1.7
3.3 1.0 1.8
3.3 1.0 1.9
3.3 1.1 1.7
3.3 1.1 1.8
3.3 1.1 1.9
3.3 1.2 1.7
3.3 1.2 1.8
3.3 1.2 1.9
3.6 0.9 1.7
3.6 0.9 1.8
3.6 0.9 1.9
3.6 1.0 1.7
3.6 1.0 1.8
3.6 1.0 1.9
3.6 1.1 1.7
3.6 1.8 1.1
3.6 1.1 1.9
3.6 1.2 1.7
3.6 1.2 1.8
3.6 1.2 1.9
How to build this table programmatically?
(Note also that the number of rows in the source table is not fixed).
Thanks in advance!
Hi Berezka,
using a magic of automatic indexing:
-
How to get the logical processing Page to run?
I'm a newbie struggling to overcome the learning curve. I created a very simple page that consists of an element (which do not refer to a database object) and a button. After the user enters a value and click on the button, I want to a PL/SQL code block always fire. I created a new anonymous PL/SQL block in the section of the process. See hierarchy of Application Builder below.
The page definition
Page processing
Treatment
Process
The code is very simple.
Start
HTP.p ("in the custom code. The htp.p message');
dbms_output.put_line (' in the custom code.) Dbms_output message');
insert into PT_ERR_LOG (RUN_UNIT_ACTVTY_TXT) values ('in the custom code.");
end;
It was designed simply to let me know that the code is accessed. When I run the page, however, I'm not either of the messages from the code or y at - it a line written in PT_ERR_LOG (I created this table).
The question is: "why isn't the enforcement code?
In the area of process Point, to the point of process article is set to "On submit - after calculations" and Validations
The enforcement process is defined on ' once per visit or when Reset.
In the region of Conditions, Type of Condition is "point value / column in Expression 1 is NOT NULL.
The value of Expression1 is: P6_PGNT_ID, which is the name of the lonely field on the page.
I tried different combinations of values of the Apex in and around the page in the Page processing. What I am doing wrong?
Thank you
KimIn the Conditions region, Condition Type is set to "Value of Item / Column In Expression 1 Is NOT NULL". The value of Expression1 is :P6_PGNT_ID, which is the name of the lone field on the page.
That's the problem. The value must not be P6_PGNT_ID: P6_PGNT_ID (remove the colon)
P.S. Please configure a user name other than 952822.
Robert
http://apexjscss.blogspot.com -
How to restore the complete process
Hi friends... I have 3 services 1, 2, 3.here 1 and 2 completed its managed and I had a problem with 3... so here I need to restore the entire process of my starting point... How to do it please let me knowIf you use databases for any removable, then you must have active XA datasources.
If you want to restore you otherwise you can use COMPENSATE activity in BPELsThank you
Vijay -
How to discover the server process?
Hello
I have the Oracle XE installed on XP. I've connected to the database using SQL * MORE. I want to know the name of created the client process, server process (i.e. SQL * MORE). How do I know the created server process. Please suggest?
Thank you
Aravind>
I want to know the name of created the client process, server process (i.e. SQL * MORE).
>Since you are under Windows, there is no process of server created to establish a session with the SQL * Plus process. On the contrary, a thread in the Oracle.exe process is created.
Other than correspondence network opened by the wire and SQL ports * more the process, I can't think of another way to figure out which thread is associated with which process.
John.
PS: since both the client and the host are on the same machine, if the communication between the two processes is done using IPC then there are no ports to match.
Published by: 440bx - 11 GR 2 on 15 Sep, 2010 13:54 - added the possibility of the IPC.
-
How to disable the export process
Hi guru
We have an FDM application that requires some places only proceed in what concerns the stage post. We want a simple method to disable the export process.
Sites meet this criterion place within specific control groups and have specifically formatted place names which makes it very easy to registering via the script. For example, all this fine location with '_PADJ '. A preliminary event to the export script can test and trap this condition but I can't find any mention as to how the export process that was started can be terminated through the API.
Any advice greatly appreciatedCreate a second target adapter and assign it to those places. Under the integration of this adapter settings, uncheck the option 'enable the load '.
Please remember answers correct & useful flag as well as others may benefit
-
How to build the project with library error in adf adf
Hello
IM using jdev 11.1.2.3
in my project I module 2 so we need to build the project with adf dependency libraries...
Two copies of the way to build the project with trial and error in adf adf
Timo
-
How to change the DML processes in Assistant APEX generated the data entry form
I created a standard form of the APEX on a table using the wizard of the APEX. Now, I added a new element to the page. How to change the DML insert statement to take care of this new item? any ideas are appreciated.
Thank you
SuryaFor the new item, just keep the type of Source as the "column of the database" and give the name of the column (the column for a new item name) under the "Source value or expression.
See you soon,.
Hari -
How to build the query SQL for indexes work based on data - dict.?
Hello
I want to build the index 'create' - statement to all indexes have worked-based on the data dictionary.
For example:
create indexes tab1.ind1
on tab1 (lower (col3), lower (col1), col2, col4)
Tablespace "index."
I know I'll find all needed information views all_indexes, all_ind_columns and all_ind_expressions. During the generation of the create statement for the index of the order of the indexed columns must be correct (the order of the indexed column can be achieved using the "position_colonne" column of seen all_ind_columns and all_ind_expressions). But what would be the best way to provide all the necessary information in the right order?
One way would be a PLSQL procedure that puts it all together - but is it possible to use a single SQL statement?
Any help will be appreciated.
Rgds
JHYou can try using DBMS_METADATA. GET_DDL:
SQL> show user; USER is "TEST" SQL> drop table t; Table dropped. SQL> create table t(x varchar2(10)); Table created. SQL> create index i on t(upper(x)); Index created. SQL> select dbms_metadata.get_ddl('INDEX','I','TEST') from dual; DBMS_METADATA.GET_DDL('INDEX','I','TEST') -------------------------------------------------------------------------------- CREATE INDEX "TEST"."I" ON "TEST"."T" (UPPER("X")) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS"
-
How to activate the payroll process try again
When I try to run the query conc "Start over the payroll process" he said value list has no entries.
No matter what can he know why it happens?
All of your comments or suggestions are welcome!There's a competitor "Mark payroll run to try again" If you want to re-run your assignmetns. But in this case, run + rollback is the same.
Or you mark individual assignment measures (in the screen, see left most column) to be retired.
-
How to build the file manager with cascade?
Guy of Halo,
How can IM new with waterfall, I build a file manager with cascade? is there a lesson or sample
Thank you
concerning
Hello
Can you clarify a little more what you mean by FileManager? Do you want the opportunity to browse and select files? If so, take a look at this thread. http://supportforums.BlackBerry.com/T5/Cascades-development/using-native-FileBrowse-and-FileSave-dia...
See you soon
Swann
Maybe you are looking for
-
How can I get my thunderbird AddressBook is displayed in alphabetical order by family name?
When you enter my e-mail address in the address book that they do not appear in alphabetical order of family names. What should I do so that he can do?
-
Pavilion 15ab253: no audio on TV Vizio
Try to distribute a movie on my vizio tv via hdmi cable of this laptop. I get picture but no sound. Suggestions?
-
Hello How I did this in labview I want to move an object from one end to the other end and disappear "as VAN move from one to the other end. Or by moving the fan etc. How this type of animation are created in labview and how it will be monitored can
-
HP LaserJet 400 ColorMFP M475D: Where I found the Documentation MIB?
Hello! I'm trying to monitor a printer, a HP LaserJet 400 ColorMFP M475D and to move forward with what I need device MIB. Thus, the HP Forum help me with this information in the last month in this thread. But, MIB has a lot of information and I don't
-
Hello I'm having a problem with my Windows Media Center. It worked perfectly without any problem since I built the computer more than 6 months ago. I have not changed anything, the only thing I've done recently is set up a homegroup on my local netwo