HP LaserJet 400 ColorMFP M475D: Where I found the Documentation MIB?

Similar Questions

• HP LaserJet 400 ColorMFP M475D: HP equipment MIB (Management Information Base)

  Hello!

  I am developing a project with Zabbix (open source solution for the network, applications, and devices, such as a printer, switch and monitoring etc) and now I'm getting better the SNMP Protocol on this software. So, to start, I need to know some information in one of my devices, in this case a HP LaserJet 400 ColorMFP M475DN.

  Could someone tell me how CAN I find the MIB (Management Information Base) and the OID (Object Identifier) of this equipment?

  Thank you!

  Navigate to the developer https://spp.itcs.hp.com/spp/ Web site

  From the home page (via the button in the Software Development Kit ), it is possible to access the package public spaces:

  

  Within the branch Laserjet and Digital Sender , select management of printers. MIB | MIBs Phoenix device, and you'll find a relevant entry for your device:

  

• HP LaserJet 400 colorMFP M475dw scan to E-mail problems

  Hi all!

  I would appreciate a solution to my agony.

  We recently purchased a printer HP LaserJet 400 colorMFP M475dw. Now, I'm putting in place (browser-> Scan--> the outgoing message profile administration) to send scanworks by e-mail but face the following problems:

  1. when it is correctly typed all the credentials, even the "Test & Save" option takes forever. After cople attempts I got it successfully tested.

  2. with the help of my personal gmail accout as the sender, sweeping work takes a lot of time. It stops in the phase connection smtp server for quite a long time before even starting the actual analysis.

  3 using the company newly created accounts of e-mail as a sender, it takes even more time. I timed it just 6 minutes and 23 seconds before the actual analysis.

  4. now, it seems to send the scan ok, but with some first attempts it failed with some general error message asking to try again.

  In my opinion, the time it takes is completely unacceptable. Is this a known problem and is there a workaround?

  Our company emails run on MS Office 365 and I use smtp.office365.com as server smtp port 587 and SSL/TLS ticked (tried also unchecked). As I said with Gmail, it would also slow but still very very very slow.

  Help, please?

  I know this is an old thread, but just in case anyone is still having problems with this - I managed to fix it by disabling IPv6 in network-> advanced in the web server administrator. Connect to smtp.gmail.com from 3 minutes + seconds.

• where to find the documentation ivi.h

  Hello everyone!

  I have a trivial question: where to find the documentation of ivi.h. Whats really interests me is based on descriptions, what they do and what parameters are passed. I look around, so this is the last place where I can find help. I have only the header file and library. What's funny to other headers of ivi as iviSwitch class I have full documentation in file fp. For ivi.h, there is a problem.

  Concerning

  Tomek

  Hi Tomek!

  It is a Windows based - files IVI help that installs with our plans and a detailed description of each function. You can find it on your computer id in the NIUninstaller Instruments\IVI\Help program folder (Program Files (x 86) or \National Instruments\IVI\Help) you have a 64 bit system.

  Kind regards:

• Where to find the documentation of the API of consistency Oracle?

  Where to find the documentation of the API of consistency Oracle?

  http://download.Oracle.com/otn_hosted_doc/coherence/342/

• LaserJet 400 colorMFP M475dn: my printer will not scan

  The printer worked perfectly for yearsnuntil today when he not scanning to an e-mail saying: username or password is incorrect and to ensure the user name and password are valid. I never set up with security by password. I read the entire manual and cannot figure out what to do. I'm desperate, since I use this for my work. Thank you very much!!!

  Hi Helen,

  We gladly invite you.

  Please open the printer homepage, to open it click on the Configuration icon on the screen of the printer and select reports, then tap report Configuration to print a report.

  Locate the registered IP / IPv4 / URL in the network information section, then go to the URL from the web browser on your computer...

  Click Scan in the main menu, and then click e-mail profiles outgoing in the button left of andclick pane change to the active scan profile.

  Updated the SMTP password with your new password, check that the PIN in option values empty unless you do not want to set a 4-digit code to scan from the front panel (sometimes, the browser can automatically fill these).

  Click on save and test, and then allow the test complete the scan to e-mail function should work again.

  Kind regards

  Shlomi

• Regular Toner artifacts - nine LaserJet 400 colorMFP M475dw

  I recently bought and even more recently unpacked and set up a new M475dw. everything is fine, except... from the first impression of sample, there is a recurring point 15/16 "on the left side of the page. The first is 3/8 "down and he regularly repeats every 17/16" to the bottom of the page.

  He has recalibrated, I ran a cleaning twice page now. On the second page of cleaning, it is somewhat a repeat ghost of the dot at intervals of 1/8 ".

  Then... (I know... don't laugh...) What to replace and how HP to get one?

  Thank you, David.

  Here are the * resolution *.

  (A) I ended up posting a real problem with HP ticket.

  (B) the problem just disappeared... what combination of cursing, insistence and prick I was using just caused the thing to disappear.

  (C) a representative of HP is actually called to discuss the problem and propose solutions

  (in that order).

  So: Problem solved. AND... mea culpa... all my preemptive whining about the product and the supposed lack of service were indeed premature.

  Next printer in my 25 years of printer channel buy...? Yet HP.

• LaserJet 400 ColorMFP M475dw: Problem of power cord for m745dw multifunction color HP LaserJet Pro 400

  I'm trying to find the number of pieces of the electric cable.

  My warranty expired on 6 December 2014.

  My power cable is flaky.

  When I move a bit the the line cord with the output plug, my printer would turn off and turn on again.

  If I move the power cord a little by the power printer connection, power remains standing.

  Can anyone provide me with the part number of HP for the power cable?

  Thank you

  Yucaipa

  This printer uses a standard pc power cord.  All power cord printer or standard pc with 3 connections will work fine.  I just hope that it is the power supply cord and not taking on the printer.

• Where are found the drive icons in El Capitan

  Can someone tell me where the icons in El Capitan. Two external drives desktop that I use for backup and storage are now using the icon of the internal drive instead of the yellow USB drive icon and teal'c Time Machine icon. I know how to replace the icons, but impossible to find the originals.

  I disconnected and reconnected the readers, hoping that it would recover the correct icons, but no luck.

  Any help appreciated.

  I use a thin 5 2015 k 27-inch iMac. 4 GHz i7 with 8 GB of RAM. OS X El Capitan 10.11.3

  Hello

  How to reset the player to the original icons:

  (1) locate drive and right-click on it

  2) click on 'Get Info '.

  (3) click on the icon in the upper left corner (it should have a blue border after clicking on it)

  (4) tap on delete, and the icon should restore to normal

  (5) you may have to restart your computer

  Hope this has helped

  -Ben

• HP Laserjet 400 M401: How can I get the double paper tray system to work?

  I try to print contracts with the letter and legal pages mixed in. I put legal paper in Tray 1 and tray 2 letter. I have checked a box in the print menu to let PDF determin the size, but when I print everything goes to legal. The product manual does not seem to address the system using double bin at all. Where am going wrong and where can I findinstruction?

  Not very impressed with this forum. Two days out, and no one looked at my post, much less answered! If anyione never reads it and wondered what happened to me, I finlly solves the problem on mine, and my double tray system seems to work just great.

• where are found the emails in windows 8

  I had to return to print spooler, discount windows 8.  All personal data would be saved, the report says.  I use Microsoft Outlook for my email, and when I refresh windows 8 that he deleted outlook (as well as all my other apps) and when I reinstalled all of my emails have disappeared.  I got a lot of data stored in the emails.  Where can I find them?

  All things Outlook is stored in a PST file.

  Even though Outlook has disappeared, the PST file must have been saved by the updating procedure.

  Start a search for her. Also, if it's really important, you can keep a copy of it on an external...

• Where is all the documentation on the SDK available for download?

  I need to connect an extension with the elements in an Illustrator document. I saw that I need to use the toolkit of the IPC, but where can I find examples of something similar?

  Best regards

  Hello

  You can get the API to the CPI toolkit (also called "Vulcan") reference from within the Extension Builder 3 Preview 3. Home page select Help-> Adobe Extension Builder 3. From there on, you can press 'Docs and QAnywhere' and 'Adobe IPC Toolkit.

  When you create a new project to extend HTML, you can select the option "Use Adobe IPC Toolkit". When you do so, the generated project is a code snippet of a model that you can use as a reference, or change it according to your project needs.

  Best regards

  Hallgrimur

• HP laserjet 400: hp laserjet 400

  Whenever I have install new ink cartridges, he throws the alignment off the coast. It's like it prints twice, especially in color.

  It makes it almost impossible to read. I'm tired of paying a technician to fix this, every month. Help!

  HP LaserJet 400 color MFP M475fn

  Calibrate the product from the control panel
  1. press the Setup button.
  2. open the configuration menu of the system.
  3 open the print quality menu.
  4. open the menu of color calibration.
  5. tap the element calibrate now.

• LaserJet 400 M451dn: laserjet 400

  I have a printer LaserJet 400 M451dn . There was a severe storm, but the printer is on a surge protector APC, including a printer HP LaserJet P1501n and other devices. All other devices operate normally.

  The LaserJet 400 M451dn printer when turned on, the symptoms are the following:

  • Noise of rattling all 4.5 sec
  • White LCD screen
  • no lights on the front panel
  • Ping address responds 'host unreachable '.
  • On printer Ethernet port are turned on

  Printer is on a network, local domestic and no software change or recent driver.

  I tried HP solutions but without success.

  Any suggestion is appreciated.

  ~ Pheeoo

  Hello @Pheeoo

  Think about replacement parts this its go device but you only have two options

  To display sound problem usually a combo that you need to get the trainer + Control Panel from one of the 2 could be the problem

  HP part dept store number its 800 227 8164

  The other option will be to return this printer for a discount for another product

  HP 888 447 0078 ext 813 solutions

  You can call them and see what they have to offer with this second option

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.