How to activate the payroll process try again

Similar Questions

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• When I try to play a game! all I get is "a debugger has been detected _ unload the debugger and try again.

  I did evry thing I can think and what's on the net
  CAN ANY 1 CAN HELP ME!

  Hi buddy300,
  Welcome to Microsoft windows vista forums!

  a. this happens only with games?

  b. remember that any changes made to your computer before this problem?
  Have c. you installed a software debugger on the computer?

  This problem may occur if one or more of the following conditions are met:

  ·         There are programs (for example, an antivirus program or debugging software) that run in the background and that interfere with the game startup process.

  ·          Your sound card or sound card drivers are outdated.

  ·         His Creative Audigy card is installed on your computer. This sound card may conflict with the game startup process.

  I suggest you do the following:

  Step 1: disable the security software on the system tray and then check.

  (Note: enable security software after the test)

  Step 2:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 3: try the steps mentioned in the article

  Games: Error Message: a debugger has been detected: unload the debugger and try again

  http://support.Microsoft.com/kb/812759

  Step 4: System Restore: -to restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose another restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem and then click Next.

  d. click Finish.

  e. the computer restarts and system files and settings are back to the State they were in at the time where the restore point has been created.

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why and how to activate the windows Defender?

  Defender goes in a loop when I try to open and then times out. Did not find how to activate the manuallt. Am unable to see Tools option

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to activate the S-video port on a satellite M30X 154?

  Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?

  If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.

  When I connect the cable to the laptop, nothing happens!
  Help

  Hello

  Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.

  But on mine, I have a NVidia Control Panel, where I can configure dualview,
  normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).

  When a TV is plugged and not recognized, I can apply recognition there.
  Relative to the opening of the Panel, the TV is also available.

  Maybe I could help you.
  If this isn't the case, note that the settings of windows your TV is not available.
  Try to go to the User Interface of your graphics card...

  Matz

• Try to install settlers 3 gold edition. I get a message "the settlers edition Gold 3 CD not found.» Please insert the CD and try again. »

  Original title: settlers 3 troubleshooting

  I had the settlers 3 gold edition installed on windows 7 Home premium 32-bit. After having extracted the files now, I try to run the game by autorun icon, a new window opens with options 'install new/edit' and a few others, but everything by clicking on one of the icons I get the same error of "settlers edition Gold 3 cd not found.» Please insert the cd and try again. »
  Please guide me how to solve the problem if you have any solution for this.

  Thank you

  Hi Bulech,

  Settlers 3 gold edition is not listed in the Windows 7 Compatibility Web site. It may or may not be compatible. Take a look. Clickhere .

  However, you can follow these steps and check if it helps to solve the problem for you.

  Step 1:

  I suggest, instead of just click on icons, you right click on the .exe file and run as administrator.

  Step 2:

  If it is little help, you can run settlers 3 gold edition in Windows Vista compatibility mode .

  Step 3:

  Alternatively, you can run the game in compatibility problems solving

  To run the troubleshooting program compatibility Troubleshooter

  a. open the resolution of the problems of compatibility of programs by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  b. follow the directions contained in the resolution of the problems.

  Aziz Nadeem - Microsoft

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: Check the location of the item and try again - when you try to delete a file

  __Deleting a file?
  I downloaded a video file in a folder.  The folder contains the name of the file, the size, but under type said: file.  When I try to delete the file I get a error message "point is more in C:\...\vids.  Check the location of the item and try again.  How can I delete this file?

  Hello

  Start in safe mode and then try to delete the file from there.

  Refer to this link and follow the instructions to start the computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to activate the mode without failure in a game?

  U see sometimes games run faster in mode safe & probably, I like it but I don't know how to activate it in gaming applications only in games ok?

  How to activate the mode without failure in games?

  AI

  Most of the games do not work in safe mode, because safe mode loads only the system drivers and not the games so it is really moot to wonder if he would run faster.

  You can start in safe mode by pressing F8 during startup. You will see that the game does not load again.

• How to activate the touch screen on Windows 8.

  Original title: How can I activate this touch screen of toa

  How can I make my computer a touch screen

  Hey Cindy.

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see you want to how to activate the touch screen on Windows 8.

  I've surely you will help solve this problem. Let's try a few steps that will help you solve the problem.

  If the computer has the features for touch screen computer and you want to enable you can try the procedure described in the article and check.

  a. press on the key Windows + Q.

  b. type Control Panel.
  c. go to the Sound and material.
  d. click on Pen and touch.
  e. click the contact tab .
  f. Enabthe use your finger as an input.

  For more information, please see the link.

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyond

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• Creative cloud packer "Please connect to the Internet and try again" when on MACOSX Netowork account

  Hello

  I'm having the following problem. We are running a Mac OS x environment on a server open directory (Lion Server). For some reason when I try to use Creative Cloud Packager under a network account I get the error "Please connect to the Internet and try again. The account has local administrator rights in the machine.

  When I log in as a local not network connection account, everything works fine.

  There is no configuration of firewall on network accounts rules, all ports are open.

  Please can someone help. We use administrator accounts network for the administration of the network.

  Concerning

  Hello Fom,

  Site/Port information used by creative teams and Creative Cloud cloud for businesses

  These host/port combinations need to be on a whitelist when connecting with one ID Adobe to download, install and activate licenses for applications via a creative cloud subscription.

  • ccmdls.Adobe.com:443
  • IMS - na1.adobelogin.com:443
  • na1r.Services.Adobe.com:443
  • prod-rel-ffc - ccm.oobesaas.adobe.com:443
  • LM.licenses.adobe.com:443
  • ccmdl.Adobe.com:80
  • swupmf.Adobe.com:80
  • swupdl.Adobe.com:80

  For more information, please see the mentioned link: http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager.html

  See you soon.

• How to activate the warning "no pixel is selected?

  How to activate the warning "no pixel is selected?

  When I selected an empty layer in photoshop, it lets warn me WARNING: no pixels were selected.  How activate this setting prompt warning again?  Thank you.

  Have you tried"reset all warning dialog boxes" in Photoshop > Preferences > General.

• Twitter: Your account may not perform this action. Please, refresh the page and try again.

  Since the update to Firefox 41.0.2 I couldn't use Twitter.com. When I try to tweet, favorite, or retweet the following error occurs. Your account may be able to perform this action. Please, refresh the page and try again. There are a couple of other users who have the same problem, but it was tinkered with Mozilla and the other pending.

  It started with the update to 41.0.2 and twitter works in all other browsers, but not Mozilla.

  Here's this other thread with the DIY: Impossible of Retweet, tweet or articles favorite on Twitter, even when I refresh the page.

  I think there must be a setting or a question Add on. Your extensions look pretty standard, so I'm leaning towards a parameter of the problem. You could test as follows:

  By default, Windows hides the .js extension. To make sure that the following steps work, you have to disable this feature, at least temporarily. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename prefs.js to something like prefs.old.

  Launch Firefox back up again and it must use the default settings (for example, integrated home page). If you need to restore your previous session windows and tabs, go ahead and select restore previous Session from the history menu.

  Twitter works best? If so, we could try to understand the precise adjustment at fault or you could rebuild your settings. Or you can undo the change by renaming the new prefs.js to prefs.txt and rename prefs.old back to prefs.js (with Firefox closed, as you did before) and understand it through a little trial and error.

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm