How to call permission settings specific app

Similar Questions

• Effects: how to call the "settings" for individual filters

  I remember in earlier versions of PE, when I applied an effect to a photo (artistic, blur, noise, etc.), there was a bar of tools/dialog box that would allow me to set unique settings for each effect.   Now, in PE 9 (for Mac), I can't understand how to access these parameters - they do not automatically appear when an effect is selected and I can't find the place where to turn this 'on '.

  I've searched and searched and searched for this, but may not know how to do this.

  Thank you!

  If you want filter dialog boxes when you use the effect controls panel, click

  on the little arrow facing downwards (highlighted in red on the screenshot below)

  and click on automatically see the filters Gallery (shows the filter dialog boxes).

  

  MTSTUNER

• Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Greetings jenniferfrom46,

  From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

  If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

  Have a good!

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• That is the soft calls for a new App specific password?

  I have put 2FA in place on my apple ID. At startup my MacBook Pro asked my password to iCloud. I enter a few times (a little distracting). Then this dialog appears (more than once):

  

  By clicking on the button 'create' taking me to my Apple ID page where I can generate passwords specific app... but I don't know what applications need these or how to enter later, which makes the process quite useless.

  Any ideas on how to understand this?

  Thank you

  It is the icon of the application messages.

• How can I find the specific settings of the extension on a product number?

  Is it possible to find the factory settings specific to your desktop HP in view of the extension of the number of product?

  I think to buy a refurbished HP Envy, but the seller has not all the technical specifications (e.g., is the RAM 1 x 8 or 2 x 4?)

  It's a HP ENVY 700-210XT (E9G99AAR #Y7W5). I hope that the Y7W5 will tell me the exact configuration, but I don't know how to decode it.

  Thank you!

  John

  This first site, IT is not the memory is 8 GB DDR3 - 1600 MHz [2 DIMM], more the other info is detailed enough.  What is missing from the "Product Description" you want to know?

• Error: The application-specific permission settings grant Local Activation permission for the COM server application in the Windows XP computer.

  Original title: DCOM {E9F9ED00-7705-101B-9802-0000C07B665C}.

  I have this message DCOM in the registry: "the application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E9F9ED00-7705-101B-9802-0000C07B665C} server application the user... xxxx...". (I deliberately placed the "xxxx" instead of my current PC for security reasons). This security permission can be modified using the Component Services administrative tool." I tried to look through the forum here, and I found elements that were close and others are not. so if anyone knows where I can go make the adjustments, it could save our society approximately $10K, because my new bosses are ready to install all new hardware and software, but if we could find a much simpler approach to this problem, this would make the new kid on the block like a champ look.
  We have a Window XP, the flat touch screen PC, running a few packages of software reviews that keep a record of our SCADA system trend.

  At random times around the clock, the PC will just restart and return to the logon screen. There is no other necessary users, so we have only the journal administrator form. As soon as we open the administrator it is specially configured to run a specific program of our choice, but if the PC keeps restarting whenever it feels like it, there is no history chart tend to save. It is essential, that we need.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• I have an error that says"the application-specific permission settings do not permit grant local activation for the application of the COM CLSID/w Server (BA 126ADI-2166-11 D 1-B1D0-0008 (OSFC1270))

  The error indicates that the application-specific permission settings do not grant approval to local activation for the application server COM with the CLSID (BA 126ADI-2166-11 D 1 - BLM - OO8 OSFC127OE) to the user NT Autoritative / network service SID (S-1-5-20).  The error message says it can be changed by using the component services administration tool.  I can't say what to do when I get to the admin tools.  Can you help me..

  Hi mildrednorcross,

  1. when exactly you receive this error message?

  2. is your computer connected to the server or the domain?

  If your computer is on a domain network, your question will be better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• How can I call the 'device Email App' with my application

  Hi all

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75
  2 opportunity BB JDE 4.7
  3. the request is:

  I want to call the 'device Email App' through my application through email-ID.
  How can I do it in a smart way? I mean once I close the email app, should return to my request.

  Thanks in advance
  Ratna

  Have you tried that?

  UiApplication.getUiApplication().invokeLater(new Runnable()
                  {
                      public void run()
                      {
                          Invoke.invokeApplication( Invoke.APP_TYPE_MESSAGES, new MessageArguments(MessageArguments.ARG_NEW,"[email protected]","Test","This is Test"));
                      }
                  });
  

• How to call the REST Webservices via native J2ME app.

  Hi, can someone help me how to call REST Webservices via native J2ME app. I don't want to use the HTTP request. Is there a possible way to call via AJAX, if so how? I use only the RIM and the J2ME API. Thank you, joy

  JSON is just the format fo the data returned.  So all you do is make a standard HTTP call, get the data and analyze using JSON.  OS 6.0 includes JSON, but OS 5.0 doesn't work, then you will need to get a JSON library if you want to use in the 5.0 OS.

  You might find them useful:

  http://supportforums.BlackBerry.com/T5/Java-development/JSON-library/m-p/573687

  http://supportforums.BlackBerry.com/T5/Java-development/sample-code-implementing-JSON-in-your-applic...

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• How can I restore settings app CC?

  I just had to reinstall all my applications CC after a primary disk failure. No worries, I thought, all my settings are saved on the Augsburg cloud!

  Does anyone know how to restore the settings for, say, photoshop for the parameters of cloud upward?

  Help Adobe seems to be updated badly and seems to show a screenshot of the app in the cloud for about 18 months ago.

  Thank you very much.

  Kevin, please refer to the link below and let us know if it helps. We would also like to know what version of the OS are the name of the Adobe software you are using.

  • Using Photoshop | Using Adobe Creative Cloud sync settings

• How to call hr_location_api.create_location to style different address with only fields that belongs to this style of address-specific.

  How to call hr_location_api.create_location to style different address with only fields that belongs to this style of address-specific. It should decide at run time indicates the time he will come to know the type of style of address and on this basis that the fields that belong to the details of the address mapped to hr_location_api.create_location calling.

  Thanks in advance.

  You can create a package wrapper above the API (hr_location_api.create_location)

  In the package wrapper, you set all values dynamically according to your needs (for example the style and add_line columns are filled on your requirements) then, you call the API.

  It doesn't work?

• I'm working on a presentation I'm doing in Australia. How can I determine if specific applications are available in the Australian App Store?

  How can I access the iTunes App Store for the Australia so that I can determine before my presentation in Australia if the iPad/iPhone apps that I share will be available here?

  ITunes on your computer, go to the store and down right click on the circular flag and select Australia, and you can search the store for apps. (When you are finished using the store > sign in menu option to log on to your account, that will move your iTunes back in your country.)

  Or you use your browser to search the Australian store: https://linkmaker.itunes.apple.com/en-us/?urlDesc=&country=au

• How to call main.cpp .cpp files

  Hi all

  I'm new to c ++.

  I have files main.cpp, applicationui.cpp and applicationui.h in the src folder, once I created a new project in the IDE QNX.

  In my main.qml, I have a list view to navigate to the page after a clicked (does the qml code).

  So, how did I call carousel.cpp (with carousel.h) after that I clicked on the list view.

  Any suggestions are welcome.

  Thanks in advance.

  main.cpp

  // Default empty project template
  #include 
  #include 
  #include 
  #include 
  
  #include 
  #include 
  #include "applicationui.hpp"
  
  // include JS Debugger / CS Profiler enabler
  // this feature is enabled by default in the debug build only
  //#include 
  
  using namespace bb::cascades;
  
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      // this is where the server is started etc
      Application app(argc, argv);
  
      // localization support
      QTranslator translator;
      QString locale_string = QLocale().name();
      QString filename = QString( "smb_%1" ).arg( locale_string );
      if (translator.load(filename, "app/native/qm")) {
          app.installTranslator( &translator );
      }
  
      new ApplicationUI(&app);
  
      // we complete the transaction started in the app constructor and start the client event loop here
      return Application::exec();
      // when loop is exited the Application deletes the scene which deletes all its children (per qt rules for children)
  }
  

  applicationui.cpp

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      if (!qml->hasErrors()) {
  
              // The application NavigationPane is created from QML.
              NavigationPane *navPane = qml->createRootObject();
  
              if (navPane) {
                  qml->setContextProperty("_navPane", navPane);
  
                  // Set the main scene for the application to the NavigationPane.
                  Application::instance()->setScene(navPane);
  
              }
          }
  
  }
  

  Carousel.cpp

  /* Copyright (c) 2012 Research In Motion Limited.
   *
   * Licensed under the Apache License, Version 2.0 (the "License");
   * you may not use this file except in compliance with the License.
   * You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
   */
  
  #include "Carousel.hpp"
  
  #include 
  #include 
  #include 
  
  #include 
  
  #include 
  #include 
  #include 
  #include 
  #include 
  
  #include 
  
  using namespace bb::cascades;
  
  Carousel::Carousel(bb::cascades::Application *app) :
      QObject(app)
  {
    qmlRegisterType("utils", 1, 0, "QTimer");
    qmlRegisterType("bb.cascades", 1, 0,
        "QPropertyAnimation");
    // create scene document from main.qml asset
    // set parent to created document to ensure it exists for the whole application lifetime
    QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
    qml->setContextProperty("app", this);
    // create root object for the UI
    AbstractPane *root = qml->createRootObject();
    // set created root object as a scene
    app->setScene(root);
  }
  
  // Getting the byte array of the string
  QByteArray Carousel::getBytes(QString str)
  {
    return str.toAscii();
  }
  
  // We only want the OutCubic easing-curve, try others,  dare you!
  QEasingCurve Carousel::getEase()
  {
    return QEasingCurve::OutCubic;
  }
  
  // This function is needed by the mirroring algo.
  static bb::cascades::Image fromQImage(const QImage &origQImage,
      const QImage &mirroredQImage)
  {
  
    bb::ImageData imageData(bb::PixelFormat::RGBA_Premultiplied,
        origQImage.width(), (origQImage.height() * 1.25) + 2);
    int y = 0;
  
    unsigned char *dstLine = imageData.pixels();
  
    for (y = 0; y < origQImage.height(); y++)
    {
      unsigned char * dst = dstLine;
      for (int x = 0; x < imageData.width(); x++)
      {
        QRgb srcPixel = origQImage.pixel(x, y);
  
        *dst++ = qRed(srcPixel) * qAlpha(srcPixel) / 255;
        *dst++ = qGreen(srcPixel) * qAlpha(srcPixel) / 255;
        *dst++ = qBlue(srcPixel) * qAlpha(srcPixel) / 255;
        *dst++ = qAlpha(srcPixel);
      }
      dstLine += imageData.bytesPerLine();
    }
  
    for (; y < origQImage.height() + 2; y++)
    {
      unsigned char * dst = dstLine;
      for (int x = 0; x < imageData.width(); x++)
      {
        *dst++ = 0;
        *dst++ = 0;
        *dst++ = 0;
        *dst++ = 0;
      }
      dstLine += imageData.bytesPerLine();
    }
  
    for (; y < imageData.height(); y++)
    {
      unsigned char * dst = dstLine;
      for (int x = 0; x < imageData.width(); x++)
      {
        QRgb srcPixel = mirroredQImage.pixel(x, (y - 2 - origQImage.height()));
        *dst++ = qRed(srcPixel);
        *dst++ = qGreen(srcPixel);
        *dst++ = qBlue(srcPixel);
        *dst++ = qAlpha(srcPixel);
  
      }
      dstLine += imageData.bytesPerLine();
    }
  
    return Image(imageData);
  
  }
  
  // Let's not have all the images mirrored, let's do that in code, and some alpha on them aswell
  QVariant Carousel::createMirrorImage(QString inputFName)
  {
  
    if (inputFName.isEmpty())
      return QVariant::fromValue(0);
  
    char buff[1024];
    QString prefix = QString(getcwd(buff, 1024));
    inputFName = prefix + "/app/native/assets/" + inputFName;
  
    QImage inputQImage(inputFName);
    QImage mirrored_part = inputQImage.mirrored(false, true);
    QPoint start(0, 0);
    QPoint end(0, mirrored_part.height());
    QLinearGradient gradient(start, end);
  
    gradient.setColorAt(0.0, Qt::gray);
    gradient.setColorAt(0.22, Qt::black);
    gradient.setColorAt(1.0, Qt::black);
    QImage mask = mirrored_part;
    QPainter painter(&mask);
    painter.fillRect(mirrored_part.rect(), gradient);
    painter.end();
  
    mirrored_part.setAlphaChannel(mask);
    bb::cascades::Image mirrored_image = fromQImage(inputQImage, mirrored_part);
    return QVariant::fromValue(mirrored_image);
  
  }
  

  I think that you have not set the constructor of class carousel with the parameter bb::cascades:Application *.

  I think you can call

  new Carousel(app);
  

  But the idon't think you create an another qml classroom of carousel, the qml must be loaded in ApplicationUI class only, another class should do the business of your application, but not anything else, should work only in QML