How to change hard drives (windows 7)
Hello, if my area 51 Windows 7 hard drive crashed, and I was able to get another hard drive with windows 7 on it installed. However, the computer does not recognize the new hard drive. but when I do a scan in the Bios it clearly says it's there. I know there is a kind of security with Winows 7 precaution that makes this whole painful process, but I do not know how to work around. Currently I am running a Linux emulator for my OS but I need Windows for work reasons. Any help on this would be greatly appreciated.
It is highly unlikely that a copy of Windows installed on a computer with a different hardware will work when used on another computer. Rather than try to do what you're trying, you must perform a new installation of Windows on your new drive. Boot from the Windows 7 installation DVD and follow the instructions for a clean install.
Tags: Windows
Similar Questions
-
can I have installed hard drive window
My dear, I have a problem. I have dell core i3 with Windows vista. When I buy my albums lab 1 window cd also available. After a while a window installed from the CD and after that I received an error when start my lab top and I can't installed some drivers like DOLL bilu and wireless. now I want to reinstall the window of hard drive... is it possible? and how it is possible
right on the c drive, I can see folder 2 window as follows1 window2 old windowmy friend please tell what can I do now to restore the hard drive windowYou cannot reinstall hard unless make you it bootable and copy the installation files. I really don't understand what you're saying here, something about drivers. IF you are unable to install them, download and manually install (drivers on the manufacturer's Web site from your)
-
Can I change hard drive with an SSD in Toshiba NB100?
Can I change hard drive with an SSD in Toshiba NB100?
The hard drive in this model is the same size as SSD 2.5 drive "?Hello
As far as I know the laptop supports the disk HARD 2.5 SATA.
I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives. -
How to change language professional window 7
How to change language professional window 7
You can add a few details (like you want to add or modify). Too bad
-
Change hard drive - how do I reinstall Windows copy on the old drive?
I intend to change my old hard drive to the laptop with a new one. Windows Vista comes with the old drive, how can I move to the new? Copy + paste does not work completely. Thank you!
Hello
There are different ways to do
hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk
Search for information on this subject on their Web site
If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move
read the information below
http://www.bleepingcomputer.com/tutorials/tutorial145.html
or if you have vista home version you'll need 3rd party software
link below is an example of this:
http://www.Acronis.com/homecomputing/products/TrueImage/index.html
also to put your machine how you bought:
1. that vista is preinstalled, you should have a recovery on your old hard drive partition
You can recovery disks to reinstall on your new hard drive
ask the manufacturer of the machine how
2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
3. or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
Save all data, because it will be lost, do the above
-
How can I change hard drive icon images?
I have a strange problem that has just occurred in Windows 7.
I have several hard drives internal and 1 external hard drive. The external hard drive has always had its own unique icon and internal hard drives all have the same icon image.
But somehow, the external drive now has an image of the icon of an internal hard drive, and my biggest drive, a HD 1.5 TB, shows the icon used previously by the external hard drive.
I can't understand why this happened, or how to redefine the way it was. Don't pose any problem of performance, its just confusing because I saw this image external drive so long I'll automatically for the picture if my computer or Explorer and now that means that I often select the wrong drive.
I click on properties > customize and select change image folder, then select a hard drive icon I want for each player, but he never changes the icon. And I'm pointing to an appropriate *.ico icon image file.
Anyone has any ideas on this issue?
Thank you.
Move the Autorun.inf file and the Mxoicon6.ico file on your external hard drive, and restart the computer. Microsoft MVP Windows Desktop Experience
-
7 Windows 7 MCE has continued to record after changing hard drives
Tuners work; I can watch live TV with them. Press Kit and messages error, says the save fails. I need help with a problem.
I used this setup for about two years. Never a problem with registration. Recently had to replace the hard drives. After installation and Windows Home Server restore everything worked. On a couple of days later I started having missing records. I am at a loss on how to proceed.When you save to?can you go into the settings and change the save location (even in a new folderon the same drive) for a few days and see if the problem is resolved?BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
I have a system where Windows 7 is installed, and I'm doing a clone of her image of HARD drive, I then want to use in my main with VMware PC, so that I can start Windows 7 at the cloned disk.
I used Ultimate Boot CD v5.1.1 with which HDD I wanted to clone, and I cloned using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HARD drive was 250 GB in size which had 3 partitions, while the USB HDD I have attached to the system, which was supposed to be the disk of destination/clone, was 320 GB in size. I chose to create a replica, exact and up to 250 GB of data (partitions, etc.) has been copied exactly, and the rest of space was not allocated. I have now connected this USB HDD to my main PC, shot to the top of VMware Workstation 8 and defined a new Virtual Machine and chose to boot from the USB HDD.
The result is that when Windows starts (from the cloned HDD inside VMware), I get the blue screen error until I get to the login screen.
How can I change my methodology so that Windows starts even on the clone? I can change the tools I use, etc.
You can use the usb drive is
you only need to patch the system a little registry
to do this, you start the virtual machine with the usb drive in a restore win7 CD, and then follow the instructions I posted here
http://sanbarrow.com/p2v2008r2.htmlPatching - easy Variant
This procedure is used when otherwise the VM would start in a kind of bluescreen 7B.
This means that VMware is the target and that you configure the computer virtual with VirtualHardware type 7.
It applies only if the virtual disk is configured like this
scsi0.virtualDev = "lsisas1068".
scsi0:0. FileName = "imported.vmdk".On the platform target start the virtual machine, newly created in the Windows 7 recovery CD.
After the initialization is complete, click CMD and run regedit.
Select HKLM, then Menu > file > load hive.
Navigate to the Windows directory on the virtualdisk > system32\config and select the file SYSTEM.
When asked for a name enter p2v.
Then find the keyHKLM\p2v\ControlSet001\services\LSI_SAS
and the startup type of the REG_DWORD value 0
Select HKLM\p2v, and then click Menu > file > unload hive.
You can now close regedit and restart.
The next time you start, you can start in the 2008 R2 system. He should find the drivers and probably need to reboot when finished. -
Change hard drive on R60 with Windows XP Prof
Hello world
I habe a R60 with 80 GB HARD drive. It has a recovery of Windows XP Prof on that partition.
How can I replace this drive with a bigger without losing my recovery XP Prof and the Lenovo software?
Can I solve this problem with an image of the old hard drive?
Software whar can I for it?
Please read this and held is very appreciated
All CU
first mark a set of recovery media to start, program, thinkvantage, create recovery media. After having done this, then make a backup of your system using rescue and recovery software and then burn the backup to DVD or store it on an external hard drive.
Now install the new hard drive, then restore the partition recovery and BONE using disks 3 recovery media that you have created, insert disk boot disks 1 and follow invites it. After you install the new copy of the OS with the drivers, you can recharge your backup from rescue and recovery backups that you burn to DVD or stored on the external hard drive.
-
Original title: replacement hard drive configuration issue
My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?
Thank you
Jeff
Hello
Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:
http://support.Microsoft.com/kb/950929
See also: http://support.microsoft.com/kb/811224
-
How to find all xls files on my hard drive, windows vista
I have microsoft office 2000 and windows vista. How to list all xls files on my hard drive (C :) where they
Click Start-> computer. Then, in the upper right of the window, type . XLS and press ENTER. Who will provide a list of all of them.
I hope this helps. Good luck.
-
After changing hard drives on my Toshiba laptop, won't activate Windows Vista.
I have two laptops Toshiba Satellite, I bought new. Due to hardware failures, I changed the hard drive of a laptop in the other. Everything works fine, but now the Panel / System states that I have two days until automatic activation. He also said whenever I try the option activate the invalid product key! The Microsoft product Authenticity sticker is more readable on the laptop where the hard drive was born. In question operating system is Vista Home Premium 64-bit. Help, please!
original title: activation problem?You can buy a full license of Windows 7 and install it, but make sure that your computer meets the Windows 7 system requirements
You need a qualification license Windows to upgrade; you don't when you moved the hard drive.
You don't say what the problem is with the hard drive of the laptop you are trying to install this hard drive Vista preinstalled from the other laptop in.
If you bought them at the same time, two thay have Vista Home Premium on them?
Why not use this laptop you try to go there and his original hard drive, if still OK.
If its hard drive is not OK > you can then put this "non-genuine" hard drive in it > reinstall the correct version of Vista that is pre-installed on the notebook computer > then purchase an upgrade to Windows 7 If you wanted to.
One of the posters put this Information in place in the Forums:
And most importantly make sure that Toshiba has Windows 7 drivers available for your model laptop activate Windows 7 works correctly.
See you soon.
-
Change HARD drive can always use recovery disk to reinstall Windows?
I have a HP dv7-4296nr, partition recovery and recovery disks. Now, I want to change the current HARD drive to the new HARD drive. But I wonderring after I change the HARD drive, can I use the restore disc I burned before reinstalling windows?
Hello
Yes you can. Your existing set of recovery disks will not only install the operating system on the new hard drive, but will also reinstall all of the original software that came with your laptop as well as re - create the Partition D of recovery on the new drive.
Kind regards
DP - K
-
How can I search for ALL photos on my hard drive, windows 8?
I had windows xp and all I had to do was to go to research and select the photos and ALL photos on my computer would come. How can I do this with windows 8?
If you open your hard drive in the file Explorer, you can use the wildcard character * to search for something as *.jpg to find all JPEG images. Doing this would look like with that by typing in the search box:
But you can find all the images, even if they are other types (.bmp or .png or .gif). To do this, use the search toolbar that appears at the top. Use the type menu and tell him you want to search for all images. It is quite similar to XP, except you get more choice.
-
Change HARD drive on Satellite L300 - Windows Vista need
Hi all
My laptop hard drive is completely dead and the repair option didn't work.
I backed up all my data, etc., including the folder HDDRecovery and WinRE partition/folder.This is a laptop Toshiba L300, which I bought in the United Kingdom (from the Toshiba online store) and I now live in China. I visited the workshop of local support from Toshiba in China, but they were unable to provide any assistance that offer me a disk empty (usually overpriced).
They said that they can not install anything because the model is different from those that are sold in China and the Windows Vista sticker is no more on the laptop (Vista sticker for a couple of years ago but I think it has never been a serial number).
Anyway, I didn't buy their hard drive and I didn't really get the original hard drive since that I didn't, and I decided to buy a hard drive from another brand for myself.
My question is: is it possible to install the Windows Vista (which I've already paid anyway) in my new hard drive? I don't know if it's relevant, but I will emphasize here that I saved my folder HDDRecovery both WinRE partition/folder. I'm not ready to re - buy Windows or buy the top-selling Toshiba Recovery disk. My plan is to install a Linux OS if Windows is no longer an option.
I could give you all the details of model and the order if necessary.
Thank you
Georgios> is there a way to install Windows Vista (which I've already paid anyway) in my new hard drive?
Yes, but you can do so via the original recovery DVD only.
Saved on external HARD drive recovery image is useless now. I put t understand why you didn t created recovery disk according to the instructions of Toshiba.If you don t want to get Toshiba disc I recommend you to install the clean version of Win7. Your model of laptop is fully supported for Win7 and it works perfectly on your machne. I ve installed long ago on friends L300.
Linux is also good alternative.
It's your decision.
Maybe you are looking for
-
How can I extend your bar of my bookmark at 2-3 lines to see all of the bookmarks I have?
I need an extension if it exists.
-
R6112 does not recognize that some Nero burned DVD
The kit: Freecom classic Satellite P10 804 16 external, internal DVD RW SD-R6112, x, XP Professional SP2 Symptoms: DVDs burned on an external DVD recorder re (Freecom classic) is recognized by the Freecom but not by the R6112. I mean by recognized, n
-
No Edge 15 Broadcom 802.11ac none hosted network management and stability problems
I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter. The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, b
-
Problems of synchronization of the sample clock with a frequency of a PXI-6229 counter!
Hi all, I'm having some problems with the synchronization of a frequency meter connected to a liquid flow meter (sensor only have 1 open collector output) with the sample of a PXI-6229 map clock. Someone there willing to give me a little help here wo
-
LaserJet M475DN: LaserJet M475DN does not
I'm in a funky difficult situation. I am troubleshooting a LaserJet M475DN from 2000 miles away. I'm in the Rio Grande Valley of southern Texas, 20 minutes from the Mexico. The printer is in a suburb of Buffalo, NY, 20 minutes from the Canada. I try