How to change repository connection in the Console of the ODI

Similar Questions

• I use windows 7. How to change and be sure the default column width in Windows Explorer

  I use windows 7. How to change and be sure the default column width in Windows Explorer

  Hi Jimsw,

  ·         If it works well before?

  ·         You did changes to the computer before the show?

  Explorer Windows will remember changed settings, check if this not happen as planned.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest running the fix of the article and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can increase the width of the selected columns and apply the settings to all files and check.

  a. right click on an empty space in the Windows Explorer, click on sort by.

  b. now, enter the size required in the Pixel with and click OK.

  Now, click on the drop down menu to organize and click on folder and Search Options.

  Click view and click apply to folders and click OK.

  I hope this helps.

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• How to change or Remove saved the PDF document?

  Never done this before.  Not sure about my "community" or if I'm IN a "discussion" by typing my origin in my research question, therefore including here in this box.

  How to change or Remove saved the PDF document?

  Hi marillym061575,

  For help, please check out the video in this link: https://acrobatusers.com/tutorials/making-changes-to-a-document-template-in-e-sign-service s

  Check if that helps.

  Kind regards

  Meenakshi

• When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  Choose the mask on the layers adjustment layer and paint in black in the areas that you don't want the adjustment layer to change

• How to change each color of the illustrator vector object in 2013 of PowerPoint?

  When my client want different colors on vector graphical objects in PowerPoint.

  For example, I created graphics in Adobe Illustrator CS6 element, and then save as .emf file with color RGB, once exported mode then I insert the image from that file in PowerPoint 2013, after that I used separate both times. When I click on the different color theme, but it has not changed color.

  See video screenshot: 2015-10-03_1414 - fatech library

  I'm trying to understand how to change each color of the illustrator vector object in 2013 of PowerPoint? Please help me!

  Thank you

  FATECH wrote:

  But I want other options...

  There is no all.

  Illustrator and MS-Office share not all the graphics features of construction at the file level. There is no universal edit-ability between the two.

  .. which is the best export (eps, emf, or svg), then insert a vector file into PowerPoint?

  If your Illustrator illustration is vector of 100% and contains no live effects, complex gradients, blends, etc., the first thing to try is copy > paste special > enhanced metafile.

  Otherwise, SPE may work, or you can use the pixelation in PNG. Personally, I do not consider export raster format Illustrator to be a stable workflow method, so I'd be inclined to use Photoshop as an intermediate step: Illustrator > Save As PDF > open in Photoshop > save in PNG. Just my preference.

• How we change our plan of the plan from photography to plan student (all products)? I recently became a student in graphic design.

  How we change our plan of the plan from photography to plan student (all products)? I recently became a student in graphic design.

  Please contact Adobe support to terminate this program & re buy a new plan according to your choice.

  In case you are re buying a different plan, cancellation fees are waived off the coast.

  Concerning

  Stéphane

• Error in AIFUtil.callOdiServlet - connection to the ODI Servlet error

  Hi John & all,

  We have EMP 11123 put in place on a cluster of 2 nodes using the common mount Linux.

  The servers in the domain of WL managed ERPI are as below:

  ErpIntegrator0 Server A 6550

  ErpIntegrator1 Server B 6551

  The oracledi agent is available to

  http:// ServerA:6550 / oraclediagent

  Or

  http:// ServerB:6551 / oraclediagent

  However when we start loading it rule fails in the export with the error (data in the workspace management) below, we get the error below:

  "CommData.updateWorkflow - END."

  2014-01-17 12:24:56, 438 [AIF] DEBUG: AIFUtil.callOdiServlet - START

  2014-01-17 12:24:56, 450 FATAL [AIF]: error in AIFUtil.callOdiServlet - connection to the ODI Servlet error: url = http://localhost:6551/aif/ODIServlet , class="HPLService", method=loadData, params=[170, u'YXaa0YHQfx8rIJlwC40l9%2BxbO8sEEgKHBWsamkRbZZRoUkatmfYLpfdw2rA%2BI73XtsD9z5AW1vqU9XRlB5WByL03O18g9Yk2TZtc6sgKJG4MzV48jMuIYC7bTiwQ0r6jwWlCRThoPRiy450ScFygchYQG5%2FAHJyZAPzPTDcFlismBoSYiWOl4vk%2Bka5tX45aYjCsHtvVRn8tUvcnsHvRPIBWls2FaHhN3CvY9L0yOhZ8FUFmNNE0ltJ4dgMVh7MyDCVStT8LVBTv5fRIPvOrsWNJhlyvNHNzvyqqN3t677Gw4B%2Fa70TxDJYDb5eb83NZe%2F3GW%2BCKxRsHve6O8JLADO%2B80TIKSrEiLoialbrG%2B6mZApB78sg7h5PwuMZAcFzXxxmnPjDM1KnaK5RRrqddMQXKAxVCg8mhaZtuzFgd3C4AdzsJVGcLM8siaZOLhdjk']"

  Traceback.

  For some reason, it's thinking that ODI runs at localhost:6551.

  We tried to manually change the URL odiagent on the configuration page of data management to one of the two correct URL as shown above. We can check the connection test succeeded. After that we ran the load, there always seem to "localhost:6551". Then, we thought probably after that changing the setting that we must restart ErpIntegrator WL managed server. After reboot, we see the default URL "http://localhost:6551 / oraclediagent'. '"

  Not sure how to get generated this URL of Servlet ODI. For sure it is not the correct collection of the server/port combination. Please help on how to solve this problem.

  Concerning

  VARA

  Hi Craig,.

  It was actually http://localhost:6551 / oraclediagent. Now, the question has been resolved. In a clustered environment, it is expected that the ports are the same on both nodes. In our case on a node, it was 6550 and on the other, it was 6551. So in the registry, it is updated with the latest value of port this is the port on Node2.

  Here, he is able to interpret the localhost to the node that hosts the managed server ErpIntegrator. To test this, I kept two servers managed upwards (ErpIntegrator0 & ErpIntegrator1), then tried to check the connectivity to the data management page. He has failed. Then stopped ErpIntegrator1, maintained ErpIntegrator0 no luck. Arrested ErpIntegrator0 and up to the ErpIntegrator1. Then with localhost:6551 ODI connectivity agent works very well.

  So, I conclude that the port is same on both nodes. Another finding was if install us a separate stand-alone ODI on the server agent and try to use it on the page of data management that it does not work in a clustered env. Where as in a single-node configuration we can update the host & port of agent oracledi.

  Concerning

  VARA

• How chang language connection EM or Console?

  Hi experts,
  When I have EM or Console connection, connection to system language is Chinese by default, how to change the language to English? Thank you.

  Kobe,

  Change the language of the browser,

  From the web browser, make the default language English.
  In Internet Explorer, see tools--> general tab--> languages--> English

  Kind regards
  DpKa

• Satellite Pro U300 - how to go if connected to the LAN WiFi

  How can I change my laptop to the wireless router, when you connect to the internet LAN?
  My laptop is Toshiba Satellite U300 pro

  Post edited by: marto_noa

  Unplug the cable LAN and switch ON the WLan.
  Usually the laptop would use the LAN connection if LAN cable is connected and LAN is active.

• How to define a connection to the server with a cluster of Olite

  Hello
  
  I install my Olite server on a single machine. This server is associated with a module of a repository. Currently, the Olite server point to a single node of the cluster.
  
  Where and how can I configure the server of Olite, then he can use all the nodes off the coast of the cluster (webtogo application and application sync), use the opportinuty to failover and load balancing?
  
  It is in the configuration config xml file or in a file of tnsname?
  
  Thank you

  OH! Oracle RAC right?

  If you use anything prior to the 10.3.0.2, then move to a node, and then change the file webtogo.ora with your RAC tns service name.

  JDBC: Slim: @(DESCRIPTION=)
  (LOAD_BALANCE = yes)
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node1)
  (PORT = 1521))
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node2)
  (PORT = 1521))
  (CONNECT_DATA = (SERVICE_NAME = nodes)))

  You will need to restart the server for the change to take effect.

  Published by: rekounas on October 22, 2008 17:11

• How to change fontsize list of the mailbox in Mail.app?

  I've closed and relaunched Mail.app, and when he returned, the list of mailboxes on the left side of the main window was oddly displayed in a significantly larger fontsize that I'm used to. I don't know how or why it happened, and I can't seem to find a way to remedy. Help? (I'm using Mail.app v9.3 - 3124).

  Check your preferences.   See if the tips here help:

  http://osxdaily.com/2014/09/16/how-to-change-the-mail-font-size-in-Mac-OS-x/

• Satellite S3000: How to change a component on the motherboard?

  How to open the case of this laptop?

  I need to change a component on the motherboard.

  I get to a point where all the screws on the base are off, and it seems that all that remains of access into the box for the "motherboard" motherboard is that perhaps the Strip on the front, just below the screen, should be removed.

  Is it so? What should I do at this point?

  It is urgent that I get to do it in the next few hours.

  I put t know which components you want to change on the motherboard, but I think that it s a good idea. : O

  However, I don t think that you won't find any manual officials how to do something on this unit. I think that only the service partner can receive these documents.

  On the net I found this site:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm

  It describes how to open and remove all the pieces of the Satellite 1200. I know that it s not a 3000 Sat but you can detect pretty much how do.

  But you know that if you don't have any experience you shouldn't t do or whatever it is delete ;)

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• How to change color depending on the color of our lipstick perfectly?

  Hello.

  Can someone show me how to change the color of the lips perfectly?

  I tried it myself for many days, but I couldn't find a way. I can change the color I want, but lips seem false.

  It's the color I want to put on the lips

  

  Here are the lips after I changed it. I go to the Quick Selection tool-> fill color-> blend modes: normal, opacity 0-100% (I adjust a lower opacity but different color)

  I tried all blending modes, but the color change so normal 100% is the actual color, only the lips look fake.

  

  Ultimately, I want the final lip as appearance below but color as above.

  

  Help, please

  1 make a selection of the lips

  2. in the main menu, choose layer/new adjustment layer / black and white

  3. in the properties panel check the color, and then click the active color into the color picker

  4. your color is around R = 249 = 95 = 104

  5 when necessary adjust the brightness of the red and yellow to illuminate the lipstic