Satellite Pro U300 - how to go if connected to the LAN WiFi

Similar Questions

• Re: Satellite Pro L670-103 - not able to connect to the internet using LAN

  Hello

  I am unable to get my L670-103, in the case of Windows 7 Pro (x 64), to connect to the internet via the ethernet jack.

  I tried running the troubleshooter in windows and reinstall the driver ethernet with no luck.
  The computer used to work fine with the same network (I have no control on the network itself, as I'm on a University campus), and my other, much more old laptop (with XP), connects with no bother.

  I'm sure the question is focused on software that - I tried to go online on the same socket after booting from an Ubuntu live CD, and it worked fine.

  What can I do about it?

  Hello

  Can you confirm that the LAN driver was installed successfully?
  What is card LAN recognized correctly in Device Manager?

• Satellite Pro P300 - 20 h: unable to connect to the WLan card and LAN disappeared

  Hi guys!

  I had my computer a little more than 6 months and suddenly came up with 2 problems!

  First the LAN adapter seems to have deleted the drivers it is, in itself, and apparintly to remove the entire map in general.
  I don't know how this can happen, because the computer was untouched for 3 months that I've been away!

  Secondly the packed wireless, the wireless says he works on the Device Manager, but when I try to connect or never discover the networks, it will not let me connect and tells me that he cannot see the networks! When my brothers computer he can find same networks!

  It is really strange and annoying reallllyyy!

  Thanks in advance.

  Carl.

  Are updated Microsoft on automatic installation?

  Try reinstalling the drivers LAN and WLAN.
  Driver WLAN, you can find the Toshiba WLAN Portal under http://aps2.toshiba-tro.de/wlan/
  Maybe your brother is right settings WLAN. compare the settings with his computer and make sure you use the correct password if the WiFi network is protected.

• Satellite A110 - 159 hangs when it is connected to the LAN card

  Hi, can anyone help?
  Can I find somewhere the LAN card firmware update? When I connect to my laptop with a built-in LAN card cable it breaks down, if it s connected the wireless, everything is ok, no crashes.

  It only happens once, after reboot ok, until the next stop and wake up. It s annoying.

  Have you tried to reinstall the card LAN and LAN driver?
  What operating system do you use?

• Satellite Pro U300 - how to reinstall the system from original Vista operating?

  My Satellite U300 (bought in 2008) came with Vista and a fallback to option of XP pre-installed. I drove back to XP at the time. Now, end of support from Microsoft for XP, I would like to re - install the Vista operating system.
  I have the recovery disks, but there is a wizard to help the resettlement?

  Or is there a function to restore to original factory setting, which I guess would be Vista? (I backed up all my files where a clean install is required). Any help appreciated, thanks.

  I checked the specifications of the laptop and this laptop model was offered with Vista preinstalled and DVD recovery Windows XP Home edition. In General original recovery image can be installed with the recovery disk. You got laptop with Vista pre-installed (without the Vista recovery disk) allowing you to create the Vista recovery disk using the preinstalled Toshiba Recovery Disk Creator.

  There is also the option of HARD drive recovery, but it works with the factory only settings. After installing WXP that this HARD drive option will not work more then now you Vista recovery DVDs. Unfortunately in your ad I didn't understand whether or not you have the Vista recovery disk.

  If so, just start your laptop and press F12. When the boot menu appears put Vista recovery disc into the optical disc drive, has chosen the CD/DVD on the list in the menu and press ENTER. ODD will start to read the recovery disc and all what you need to do is follow the menu on the screen.

• Satellite Pro L300 PSLB9E: 100Mbit instead of connecting to the network local 1000Mbit WinXP

  Downgraded to WinXP.
  Have downloaded all the drivers available from Toshiba support, but still cannot get the speed of 100Mbit connection. I guess it's an another downgrade of the bios needed to support the XP operating system?

  Hello

  Your laptop supports Ethernet 10/100 Base-TX.
  This means that the network card supports the standard of 10 Mbps and 100 Mbps.

  I put t know why you expect at a higher speed, but the 100 Mbps is the maximum value for this chip to Base - TX LAN Realtek 10/100

  Welcome them

• Satellite Pro U300: Cannot see the HARD drive during the installation of XP

  Due to the restrictions of the network must downgrade the operating system on a new satellite Pro U300. I am unable to run the XP + sp2 cd as it says there is no hard drive installed on the machine. I guess it's because I need 3 scsi drivers or third-party raid.

  Does anyone have these or know a place where I can get my hands on them? Or am I completely off the mark that you have another solution?

  Hello

  You need the Intel Matrix Storage Management utility for the management of your local storage, including the RAID support.

  On the European driver Toshiba page I found Robson tea for Vista package which includes the Intel Matrix Storage Management utility.

  The same can be downloaded from the Intel page for the XP operating system.

  I found this on the page of Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Something similar is described here in this thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

  Good luck buddy

• Satellite Pro U300: Error Message: cable is disconnected, but Lan cable is connected

  Hello

  I have problem with interface ethernet (wired) in my Satellite Pro U300. I use in many places (home, office, customers) and when I restore in sleep or hibernation mode interface ethernet shows that the * cable is disconnected *, despite the connection of the cable * is * connected and works perfectly with all other devices, laptops and PC.

  The switch also shows that the there no signal link. But re - activate the malfunctioning ethernet port, just disable the ethernet interface and then after 5s (1 s is too short!) turn on.

  Then a baloon in taskbar window indicates that there are 10 Mbit/s link, but actually, the link works at 100 Mbps (I can see it in the connection status window and the ethernet LEDs switch). This is the only laptop that has this kind of problems.

  I have the latest version of the installed ethernet 5.664.205.2007 driver on Win XP SP2.

  Is it possible I'm getting rid of turn on interface ethernet several times per day (except change laptop)?

  Hello

  I put t have a real solution but I have a few proposals of solution

  First of all, you should check in Device Manager if the network card has been properly recognized. The Ethernet card should be listed under network without any yellow exclamation point cards.

  If the network adapter has been properly recognized, then the next step should be checking the properties of the LAN connection.
  There, you should check the properties of the TCP/IP protocol.
  The settings such as IP address automatically get & address of DNS server automatically get must be marked.

  Greetings

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• How to reinstall the DVD on Satellite Pro U300-143

  Hello!

  I have a toshiba dvd player uninstall by mistake! How can I install it again? are there options other than the pc recovery?

  I m using the satellite Pro U300-143 with windows vista busines

  Thanks in advance

  Hi Jan

  Please try with the link given by Robin. If this does not work please post again.

• Satellite Pro U300 PSU31E - two how to adjust the fan speed

  While using the laptop the fan comes in for a few seconds and then stops again, which causes the temperature
  increase... what makes the fan?
  Throttle upward rather than stay in a slow to medium status.

  I'm running Vista Business, but I did ' t find the parameters in this regard.

  In the ACPI BIOS is not accessible, but as already posted my problem looks a bit like this:

  Re: ACPI fan on Satellite L30
  Posted the: 13-Sep-2007 22:08 reply

  The fan goes in cycles like this:
  ------------------
  Less than 50, fan
  When > 55, fan to full
  When< 55,="" fan="" on="">
  When< 50,="" fan="" off="">
  and it continues

  ------------------

  It would be much better than when he went to more than 50 years she just spend on bass, then
  It would never reach 55 and never go up.
  And the laptop would be 100 x more silent.

  Another thing: the Germany from Toshiba support page won't load at all or is the global page
  very slow, using different locations and conections. That I can not retrieve all the information to help me.
  And I do not think the University backbone or my DSL 6 Mbps at home is the problem

  Hello

  The fans begin to turn only if a certain temperature point has been reached.
  These fan table information is stored in the BIOS and cannot be changed.

  Some computers laptops satellite supports an additional option in the Toshiba HWSetup. It allows to change the CPU dynamically switchable or always low frequency mode.
  This would set the temperature to a lower level and the fans would lead occasionally.

  In any case, to my knowledge, this option is not available in the Toshiba HWSetup and not in the BIOS so I guess that it s not possible to control fan behavior.

  By the way; If you wish, you can test a tool like aSpeedFanfreeware.
  This program can control the speed of the fans according to the temperatures of the system.
  Maybe it will work on your Satellite Pro U300

  Good bye

• FN + F10/F11/F12 in Satellite Pro U300 does not work

  Guys,

  need your help...
  I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...

  Please help me...

  Thank you
  <>

  Hello

  When you use FN + F11 small control LED must be lit and the keypad must be enabled.
  If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.

  So nobody here knows what you did with your laptop and why these options are not available more.
  Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.

• Satellite Pro U300 (PSU31E) - freezes on the Welcome screen

  Hi all

  I have a Toshiba Satellite Pro U300 model no notebook 01900REN PSU31E purchased as new and connected to Windows XP.

  It worked perfectly fine for about a year until very recently when it started freezing on blue welcome screen. I had to disconnect the battery because it has not proceeded past the blue welcome screen. I ran the antivirus avast but it nothing of the detected note. Now even when I disconnect and reconnect the battery the screen does not go beyond the Welcome screen blue even if the mouse is moved again, and occasionally the pointer arrow-pointer to sand-clock pointer initially and then rest as arrow-pointer changes. Pressing buttons, Ctrl + Alt + Delete, using the mouse or the battery are not any good.

  I backed up things but not until recently. Please help me, I'm an amateur like these sorts of things, I'm English teacher from teaching professional so I really need materials and capabilities of the laptop. What should I do, please help!

  Thanking you in advance,

  Hey the view,.

  Have you tried the same thing in safe mode? Go to the advanced boot menu by pressing F8, select Safe mode.
  Check it!

  It of really difficult to say why this is happening but if it doesn t work I think that it s time to reinstall Windows. So take the Toshiba Recovery disk and boot from it. If you follow the instructions on the screen you get factory in minutes! :)

• Satellite Pro P300 - how to upgrade Intel GM965 display driver?

  Hello

  I do not found how can I update my graphics driver from the Web from Toshiba website. I found some other updates, but not this one...

  And I have a problem with a game (Starcraft II) with "igxprd32" which seems to refer to the Intel Graphics accelerator driver.

  When I go to the update site Intel it tells me:
  "A custom computer manufacturer driver is installed on your computer. The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer. "

  Thanks in advance for your help

  Concerning

  (Satellite Pro P300)

  Hey,.

  I had the same problem on my Satellite Pro U300 but it of easy to solve.

  Go to Device Manager, right click on your graphics card. Select Update driver and follow the instructions in a new window. Select the Advanced installation where you can choose the directory and the driver yourself.

  But don t forget to extract the zip first, otherwise the driver will not be found. ;)

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)