How to change the arrow heads?

Similar Questions

• How to change the header text in a sensitive presentation of HTML5

  I work in HR 11.0.4.291.

  This is probably a "duh" question, but I can't remember how to change the title text in the header of a sensitive layout. In the layout editor, I see that I can change the title, color and color of hover font, but where you change the actual text?

  Any help will be much appreciated.

  Can also be the title bar?

  

  See you soon... Rick

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• How to change the SOAP in OSB header element?

  I need to change the soap header in the OSB mail flow, what action can be used here?

  
  

  
  

  before change

  < envelope soap:

  ' xmlns:soap = ' http://www.w3.org/2001/12/SOAP-envelope "

  " SOAP: encodingStyle =" http://www.w3.org/2001/12/SOAP-encoding ">

  < soap: Header >

  < / soap: Header >

  ...

  ...

  < / envelope soap: >

  After display

  < envelope soap:

  ' xmlns:soap = ' http://www.w3.org/2001/12/SOAP-envelope "

  " SOAP: encodingStyle =" http://www.w3.org/2001/12/SOAP-encoding ">

  < soap: Header >

  < id > < id > 11

  < name > XX < / name >

  < / soap: Header >

  ...

  ...

  < / envelope soap: >

  Use a replacement/assign to the variable context $header...

• How to change the upper-left corner of the multicolumn listbox?

  

  Can I change the properties of the cell (-1, -1), but I don't know how to change the text.

  Is it too simple or impossible?

  Kind regards

  Ljubo.

  In Excel, you cannot change the headers of columns (A, B, c...) and headers of lines (1, 2, 3,...).

  I have a 2D data table Y a 1 d of data table X. data of X are the same for all the columns of Y. The first idea was to use X values as row headings to give him special attention. There should be a header above the data of X (name, quantity, unit,...). See the example below.

  

  The solution is very simple: I created a label and put it on the upper left corner of the listbox.

  Good day

  Ljubo.

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Microsoft Paint - how to change the rule in inches and centimeters

  How to change the rule in inches, centimeters, etc.. ?

  While in the paint, select the arrow down in the blue box in the upper left of the window.

  Select Properties

  Set the unit of inches, etc.

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).

  

• How to change the color of the title bar?

  Hi @all!

  How to change the color of the title bar? I want to use color.black, not blue? who can tell me, thanks!

  If you change your theme of "Bright" (default on the Z10) 'Dark' (which will default on the Q10) all the bars title will change to black. However, be aware that all components of Cascades will change the bright theme with the dark theme, such as the buttons change to light gray to black.

  See example on this page: http://bbcascades.com/index.php/ui-features/design/42-theme (note this is an old screenshot, I should update to have the bright theme with the new blue header bar)

• How to change the color of form fields

  I don't know how to change the color of form fields. They default to gray, but I don't know how to make a different color.

  Gray does not match the color scheme of my landing page!

  Thank you!

  I think you have two options when you are working on a landing page with an embedded format:

  • You can change the background color of the entire form field set by selecting the shape, and then clicking on the Toolbox. In the window that opens go to the second (on a paint brush icon) and select the background color you want.
  • You can change the background color of the actual fields in the form by adding CSS styles. Select the Toolbox, go to the last tab (Tools Extract page) and in the middle of this window, you will see "head | CSS | JS"- select this average CSS tab and enter the style code to get the color you want. Here is an example of code you can put in it. Note that #000000 is the color code for black. Here is more information about the code: css - background in the input fields and text color? - stack overflow

• How to change the areas of region of report in read-only mode?

  How to change the areas of region of report in read-only mode?
  
  SKUD.

  Add fuction javascript after the page header (or section of function and Javascript variables)

  function disableItems(pRegionStaticId,pDisableFlag) {
    $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
      if( $(this).attr('name').match(/f[0-9][0-9]/) ){
        return $(this);
      }
    }).attr('disabled',pDisableFlag);
  }
  

  pRegionStaticId is static Id + the region

  Note that this code specifically disables only the berries of request. Disabled items are not available after the submission (and are therefore different from readonly). But any javascript page can change disabled or readonly points (client side), so you need to check on the side server to validate the data.

  You can disable items to help

  disableItems ("MY_REGION_ID", true);

  and allow them, by passing false

  disableItems ("MY_REGION_ID", false);

• How to change the URL path?

  How to change the default URL [http://localhost/] need to change like this http://server Address/analytics/saw.dll IP? Dashboard... we're using IIS, where I need to change... They is any code that I need to mention?
  
  I find this code, but this one for OC4J
  
  < html >
  < head > < title > My OBIEE Application < / title > < / head >
  < frameset lines = "0%, 100%" >
  < frame src = "" noresize = "noresize" > "
  < frame src = "move.html" >
  < / frameset >
  < / html >
  Move.html
  < html >
  < Head >
  < meta http-equiv = "refresh" content = "0; URL = http://localhost/analytics/saw.dll?Dashboard">
  < / head >
  < / html >
  
  
  in
  
  Published by: chir0n on January 27, 2010 12:30
  
  Published by: chir0n on January 27, 2010 12:43

  Hi ChirOn,

  I have no configuration of IIS for me to test this, but this gives a shot:

  To redirect requests to another Web site or directory

  1. in the services manager IIS, expand the local computer, right-click on the Web site or directory you want to redirect, and click Properties.
  2. click on the home directory, virtual directory, or Directory tab.
  3. under content from this source should come from, click a redirection to a URL.
  4. in redirecting to the zone, type the URL of the directory of destination or of the Web site. For example, to redirect all requests for files in the directory of the catalogue to the NewCatalog directory, type/NewCatalog.

  Good luck!

  Best regards

  -Joe

• How to change the name of the file in the AS2 protocol

  Hi gurus B2B
  
  We send a purchase order (850) to our supplier, he received successfully by them, but for all transactions (files) that they receive the same file name (5020). We use the AS2 protocol (please help me how to change the name of the file)
  
  If its generic protocol of his work, but in the AS2 protocol there is no option to set the file name
  
  Need help please
  
  Concerning
  CNU

  Hi ALAIN,

  Never worked with BSE (However, I worked with OSB), but it looks like you are enquing the name of the action two times. Please queue using code below and let us know the result - please

  
  
  
  
  
  
  

  In fact the last ACTION_NAME header must contain the value of file as well as the content type name. (you try to add a new header actionName is not that good)

  Kind regards
  Anuj

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).