How to change the dpi from 72 to 100

Similar Questions

• How to change the resolution from Adobe?

  Hello

  I can't change the resolution from Adobe Acrobat Pro XI. All my other programs seem normal, but Adobe's "In-your-face" and everything is so great.

  How can I change the resolution from Adobe is no longer scale on my laptop and two monitors?

  
  Your help is appreciated.

  Hi mooshtie,

  Could you please specify if you wish to reduce the size of the PDF icons or icons of the toolbar.

  See the following link and if it is useful:

  How can I reduce the size of the icons in the toolbar? (Accessibility)

  Let me know.

  Kind regards

  Ana Maria

• How to change the DPI for Officejet 4500 Wireless settings

  Printer: HP Officejet 4500 G510n wireless (CN547A)

  OS: Windows 7 64-bit

  My DPI settings seem to be too high.  I'm scanning a single page and the file is 21MB in size.  I can't find how to reduce the dpi.

  Is it possible to do it on this device?

  Thank you.

  Hi zulwe,

  You can adjust the DPI and PPI parameters depending on the program you are using. Because you are using Windows as your operating system, you can have this printer Officejet HP solutions Center. Check this box: scanning with HP Solution Center software in Windows

  And no, we cannot do this on the device. It can only be done through your computer.

• How to change the system from Vista Home Premium to Vista Ultimate 64 withoute lose the option of HARD drive backup?

  IM now running Vista Home Premium 32. I would like to change the system for Vista Ultimate 64 so I can run more than 4 GB of memory. Now Ive some factory settings if something happened, I can run my HARD drive restore. My question is how to change the Vista 64 operating system, so I can keep the recovery on my hard drive partition?  Mayby there is some kind of upgrade cd?

  Thank you

  Hello

  32-bit to 64-bit is not an upgrade

  It must be done with a clean installation using a full version ' / Ultimate 64 bit license

  Contact the manufacturer of your computer for more information on getting 64-bit ultimate, which I doubt they will always

  and microsoft sells more vista

  they moved on windows 7

  and you are supposed to make this partition recovery disks to reinstall vista

  ask the manufacturer of the computer how to

• How to change the language from English to Arabic Windows?

  Original title: change the function from English to Arabic

  I have windows vista Home premium English characteristic. Can I change the Arabic service. Thank you

  Not with Windows Vista Home Premium, you would need to upgrade to Vista Ultimate Edition and then change the language.

  "FALAH_42" wrote in the new message: * e-mail address is removed from the privacy... *

  I have windows vista Home premium English characteristic. Can I change the Arabic service. Thank you

• How to change the location from the computer to the India

  original title: as I used my dell windows me in Japanese and now I want to change the English version and I m currently located in India, how to change

  I m using Japanese language on my ThinkPad from IBM, Microsoft Windows Me from my PC laptop Dell and now need to change the English version

  Hello

  You can validate the query in the link mentioned below for assistance.

  http://support.Microsoft.com/ph/6519

  Hope this information helps.

• How to change the screen from Portrait to landscape?

  I changed my screen from landscape to portrait years ago and now I can't go back.  My screen went out and I use a borrowed on the side for now, quite the hassle.  Any ideas?

  Hi DavidMortensen_907,

  • What happens when you connect your monitor to the computer?

  I suggest that you connect the monitor for which you want to change the portrait view and then go to the link thread with similar problem and try the steps mentioned, check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/switching-between-portrait-and-landscape-display/9bdea91e-3e86-4e19-9E23-97193b63e5cd

• How to change the value from another page

  I'm filtering province in my application based on a province selected in the home page (P16), however the user can submit a form that has a province that and after that, all the content must be filtered according to the selected province 'new '. So I'm in the P7 and after submitting the form, I would need to change the P16_PROVINCE - which belong to another page (P16).
  
  but do not know how,
  Any help?

  Mehrdad says:
  Thanks, VC, but I need to have a trigger to change the P16_PROVINCE after submitting the form, so that one must be changed according to what the user does on a form...
  After he submit the form, I have my game P7_PROVINCE, which is fine, but AFTER the selection, I need to change the P16_PROVINCE (which is used as a global variable to filter my records...)

  Add a plsql page 7 page process and submit the game it runs - as below

  //assign the value of P7_PROVINCE into P16_PROVINCE
  :P16_PROVINCE := :P7_PROVINCE;
  

  See http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_ses_val.htm#HTMDB03012

• want HP how to change the system from Russian to English

  Hi guys

  I bought a laptop Russia, is a desire to hp with windows 8, I put the English language pack on it, but it's always 70% in Russian that is to say the system / settings nothing to do with the heart of it.

  It is possible to do this in English?

  regards ben.

  Hi Ben,

  Thanks for posting your query in Microsoft Community Forum.

  Basically, we need to change the language and regional settings after you install the new language on the system pack to make each look with the applications and the basic functions of configuration. So you will need to consult the following steps and check if you have all the settings in your preferred language.

  1. Press the Windows key + X, and then select Control Panel.
  2. Select clock, language and region (in the view of the categories ).
  3. Click on the language.
  4. In the navigation pane, click Advanced settings .
  5. Under "Override for the Windows display language" select English (preferred location).
  6. Under "Override for the default input method" select English (preferred location).
  7. Click Save.
  8. Reopen the clock, language and region as in step 2.
  9. Click on the region.
  10. On the Format tab, check if the Format is selected as game Windows display language (recommended).
  11. Go to the administration tab, and then select settings... change system locale
  12. Select English (preferably local) , and then click OK.
  13. Yet once, in the administration tab, click copy settings...
  14. Check the check box beside the Welcome screen and system accounts.
  15. Check the box next to new user accounts.
  16. Click OK in the tabs and close the control panel.
  17. Restart your computer.

  Check if the language changed to your preferred language.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to change the image from one to another color.

  Hi all

  In our application, we used two sets of elements [i., e text elements & list drop-down list items]

  For this, we used as reference below

  Label-> country

  Horizontal/vertical alignment-> right

  Model-> label required

  Now for the necessary label currently it shows as

  IMG alt = "Required field icon" src="/i/themes/theme_12/required.gif

  [what is orange] but I don't have to turn into 'Red' for the asterisk

  Could someone help me on this request to make changes.

  Kind regards

  Sheikh tayeb!

  
  

  SruthiTamiri wrote:

  If I found a Spain with red asterisk where should I replace in my template, because I'm not able to find the location to replace the image.

  You can provide the path to replace things.

  1. Go in Home > Application Builder > Application > shared components > models
  2. Select the required label templates
  3. Change the definition of the label, by replacing the image src with the new image URI attribute

  

• How to change the color from orange to yellow

  I have a picture of a ring.  The color of the stone is a champagne color on my picture.  I want to change the color of the stone to a pale yellow and keep all the faucets in the stone.   Is there a way to do this?  Thank you

  Here is a version with a lighter yellow color. I modified the method slightly to achieve this.

  

  1. to get the result above, I created the Hue/Saturation adjustment layer even as I did in my original post. Reminder: Here are the settings I used for the Red slider: hue + 43; Saturation + 61; I left lightness to 0.

  2.i duplicated the adjustment layer, I did to the #1 step. I just did and changed the master setting. Here are the settings I used: Saturation + 10; Lightness + 41; Hue was left to 0. Note: None of the individual channels have been changed. Leave them as they are with the red channel adjusted.

  3. this impact also the band that lost the contrast. I used black paint to protect the band for adjustment has only affected the stone. (I masked only the Strip in the Hue/Saturation adjustment mask, I created in step #2.)

  4. as before, I created a composite copy of all my layers by pressing ctrl + shift + alt + e. (if on a mac, use command + shift + opt + E).

  5. I used the tool sponge to desaturate the band.

  6. I lowered the opacity of layer band desaturated to 59%. (Use the opacity slider to bring reflections to taste.)

• How to get the data from more than 100 domains in bulk API V2.0?

  Hi all

  I try to get data from Eloqua by APIs in bulk because of big data.

  But my Contact 186 fields (more than the majority of export limitation 100). I think I need to get all the data by 2 exports.

  How could I corresponds to 2 parts of a line and join together?

  I'm afraid that any change of data between 2 relative to exports 2 synchronizations would make different order.

  FOR EXAMPLE:

  1. any document is deleted or modified (if it matches do not filter) after obtaining data of the first part and before getting the second part, then everyone behind it would have back in part result.

  2. the data in some fields (included in both parts) are changed between the 2 synchronizations, then the values of the second part are more recent but the values of the first part are old.

  All suggestions should.

  Thank you

  Biao

  bhuang -

  I don't know that you ever go to work around the fact that things will change in your database while you are synchronizing the data. You have to have a way to create exceptions on the side of the synchronization.

  If I pushed Eloqua data to a different database and had to contend with the problem of matches change while I'm syncing, I would create a few additional columns in my database to track the status of synchronization for this folder. Or create another small table to track the data map. Here's how I'd do.

  1. I would have two additional columns: 'mapped fields 1' and '2 fields' mapped. They would be all two datetime fields.
  2. I would do only one set of synchronization both. First of all, synchronize all records for email + 99 fields. Do the entire list. For each batch, the datetime value of the lot in 'mapped fields 1' column.
  3. I would then synchronize all folders of email + other 86 fields. Repeat the entire list. For this batch of the datetime value of each batch in their 'mapped the 2 fields' column to now().
  4. For all records that had only 'mapped fields filled, 1' but' fields mapped 2' was empty, I would be re - run the second query Eloqua API using e-mail as the search value. If no results were returned, I would remove the line. Otherwise, update and the value 'mapped fields in 2' now
  5. For all the records that were only "fields mapped 2', I re - run against the first email query API Eloqua, fill in the missing data and define 'mapped the fields of 1' of the current datetime object." If the record has not returned, remove the line because it is probably not in the search longer.
  6. Finally, the value 'mapped fields 1' and 'mapped 2 fields' empty for all records, since you know that data is synchronized. This will allow you to use the same logic above on your next synchronization.

  Who is? It is not super clean, but it will do the job, unless your synchronizations take a ridiculous amount of time and your great data changes often.

• How to change the pages look one at 100% to 90%

  All my pages can load on 90% - my husband added a printer wireless to my laptop and now the pages are loading in 100% - I want to return to the 90% load - HOW?

  If you are referring to IE, try this:

  In your status bar, bottom-right, Point on the Zoom, click the menu drop down > click Custom > set it to 90% >, click OK.

  HTH

• How to change the data from the database and displayed in a DG

  Hello, it's me again with a simple question:

  I received the request of SQLi that returns multiple lines.

  In this line, I have for example:

  Reward-> 1

  How, instead of show 1 in the data grid, change this value to 'YES '.

  I followed this thread:

  private void onResultStats(event:ResultEvent):void

  {

  ServerStatsArr = new ArrayCollection (event.result.source);

  for (var i: int = 0; i < ServerStatsArr.length; i ++)

  {

  If (.abonnement ServerStatsArr [i] == 304) {}

  ServerStatsArr [i] .abonnement = 'Premium ';

  } else {}

  . Subscription ServerStatsArr [i] = 'no ';

  }

  If (ServerStatsArr [i] .transparence == 1) {}

  . Transparency ServerStatsArr [i] = 'yes ';

  } else {}

  . Transparency ServerStatsArr [i] = 'no ';

  }

  }

  ServerStatsArr.refresh ();

  }

  Why this method works for the subscription when (.abonnement ServerStatsArr [i] == 304) he displays Premium, but it does NOT work for transparency ?

  I tested (.transparence ServerStatsArr [i] == 1) and (.transparence ServerStatsArr [i] == '1')

  Thank you

  Hi again,

  private void setLabel(item:Object,column:DataGridColumn):String

  {

  Switch (Column.DataField)

  {

  case 'transparency ':

  If (item.transparence is "1")

  return ('yes')

  on the other

  return ('no')

  break;

  case "subscription":

  If (item.abonnement is "304")

  return ("premium")

  on the other

  return ('none')

  break;

  by default:

  Return("");

  }

  }

  and your grid adjustments - add the labelfunction to the following topics
  I hope we get a credit of distinction for this mission...

  David.

• "How to change the resolution from 1024 x 600 to 1024 x 768 NetBook screen 10 inches.

  allow a friend

  1 mini Netbook 200-4222TU/2600 / 2 GB / 320 GB/10 "inches

  2. Windows 8

  3. the image error

  4. -

  5 HP MINI 4222TU/200-10 "inches

  The native resolution of your screen is 1024 X 600 and what that means is that those who are fixed the number of pixels of your screen and there is no physical way of evolution set the resolution to 1024 X 768 or 1366 X 768.

  http://support.HP.com/US-en/document/c03382841=

  I know W8 requires a minimum resolution of 1024 X 768 and the only way to change that is to install a new screen with a higher resolution.

  I took a look at laptopscreens.com and there is a screen that fits, but if the video card in your Mini will recognize a higher resolution is a gamble. LaptopScreen.com do not accept returns based on incompatibility issues.

  You may also have problems with W8 drivers as well.

  https://www.LaptopScreen.com/English/model/HP-Compaq/mini~210/

  Better stay with you original OS. I know that this kind of sucks, but you risk getting stuck in the hole to lose time and a good amount of money to try to get your Mini to run W8 yourself.