How to get the data from more than 100 domains in bulk API V2.0?

Hi all

I try to get data from Eloqua by APIs in bulk because of big data.

But my Contact 186 fields (more than the majority of export limitation 100). I think I need to get all the data by 2 exports.

How could I corresponds to 2 parts of a line and join together?

I'm afraid that any change of data between 2 relative to exports 2 synchronizations would make different order.

FOR EXAMPLE:

1. any document is deleted or modified (if it matches do not filter) after obtaining data of the first part and before getting the second part, then everyone behind it would have back in part result.

2. the data in some fields (included in both parts) are changed between the 2 synchronizations, then the values of the second part are more recent but the values of the first part are old.

All suggestions should.

Thank you

Biao

bhuang -

I don't know that you ever go to work around the fact that things will change in your database while you are synchronizing the data. You have to have a way to create exceptions on the side of the synchronization.

If I pushed Eloqua data to a different database and had to contend with the problem of matches change while I'm syncing, I would create a few additional columns in my database to track the status of synchronization for this folder. Or create another small table to track the data map. Here's how I'd do.

  1. I would have two additional columns: 'mapped fields 1' and '2 fields' mapped. They would be all two datetime fields.
  2. I would do only one set of synchronization both. First of all, synchronize all records for email + 99 fields. Do the entire list. For each batch, the datetime value of the lot in 'mapped fields 1' column.
  3. I would then synchronize all folders of email + other 86 fields. Repeat the entire list. For this batch of the datetime value of each batch in their 'mapped the 2 fields' column to now().
  4. For all records that had only 'mapped fields filled, 1' but' fields mapped 2' was empty, I would be re - run the second query Eloqua API using e-mail as the search value. If no results were returned, I would remove the line. Otherwise, update and the value 'mapped fields in 2' now
  5. For all the records that were only "fields mapped 2', I re - run against the first email query API Eloqua, fill in the missing data and define 'mapped the fields of 1' of the current datetime object." If the record has not returned, remove the line because it is probably not in the search longer.
  6. Finally, the value 'mapped fields 1' and 'mapped 2 fields' empty for all records, since you know that data is synchronized. This will allow you to use the same logic above on your next synchronization.

Who is? It is not super clean, but it will do the job, unless your synchronizations take a ridiculous amount of time and your great data changes often.

Tags: Marketers

Similar Questions

  • How to hide/show a field based on the data from more than 1 field?

    Hello.

    I'm trying to hide/show a based on the data of field2 and field3, Field1

    in fact using dynamic measurements I can only hide/show Field1 Field2-based, but I need a combination, for example:

    If field1 = 'A' and field2 = 'B', then see the field3, other hide field3

    y at - it an easy way to do it.

    I use Application Express 4.2.4.00.08

    Thanks in advance

    Dynamic action

    On the changes

    jQuery selector: #P1_ITEM_1, #P1_ITEM_2

    Condition: JavaScript

    $v ('P1_ITEM_1') == 'A' & $v ('P1_ITEM_2') == 'B '.

    Real Action: show item 3

    Action of false: hide item 3

  • Get the data with more than one of the desired value

    Hello

    I need to shoot the records with one value of 'Other' more on delivery days fields.
    Delivery of fields are Mon, Mar, sea, game, Fri and Sam that indicates where the item will be shipped. The value can be at home, work, or other.

    Examples of data include:
    cust_id: 123
    Article: newspaper
    Mon: Home
    Kill: Work
    Sea: other
    game: Home
    Fri: other
    Sam: other


    And here is my request so far.
    Select
    cust_id,
    agenda,
    LUN,
    Mar,
    Kills,
    game,
    Fri,
    Sam
    sum (case when (del_mon = 'o' or del_tue =' o 'or del_wed =' o 'or del_thu =' o 'or del_fri =' o ' or del_sat = 'O') then 1)
    otherwise 0 end) as day_ctr

    of the customer

    Could you please help me with the right formula should I get this?

    Thank you in advance...

    Hello

    This should do it:

    Scott@my11g SQL>with sampledata as (
  2  select 123 cust_id, 'newspaper' item, 'Home' mon, 'Work' tue, 'Other' wed, 'Home' thu, 'Other' fri, 'Other' sat from dual
  3  union all
  4  select 456, 'newspaper' item, 'Home' mon, 'Work' tue, 'Home' wed, 'Home' thu, 'Home' fri, 'Other' sat from dual
  5  )
  6  --#### True query starts here ####
  7  select *
  8  from sampledata
  9  where (
 10  decode(mon,'Other',1,0)
 11  +decode(tue,'Other',1,0)
 12  +decode(wed,'Other',1,0)
 13  +decode(thu,'Other',1,0)
 14  +decode(fri,'Other',1,0)
 15  +decode(sat,'Other',1,0)
 16  )>1 ;

   CUST_ID ITEM      MON  TUE  WED   THU  FRI   SAT
---------- --------- ---- ---- ----- ---- ----- -----
       123 newspaper Home Work Other Home Other Other

  • BlackBerry smartphones, I don't know how to get the data from the phone to the computer

    I have the Desktop Manager and the telephone connected to the cable.

    He seems to have only coices I want. I don't want is a full backup or restore or synchronoizing or send anything to the phone.

    I want to just do a few simple things:

    (1) I want to copy pictures from my phone to my computer, that I can see with the standard Windows software.

    (2) I want to copy my address book from my phone on my computer, that I can see with some standard desktop application, any.

    (3) I want to copy my calendar so I can see it with some standard desktop application, any.

    How can I get them?

    Thank you

    Hi and welcome to the Forums!

    JustCurious wrote:

    (1) I want to copy pictures from my phone to my computer, that I can see with the standard Windows software.

    See this:

    http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/HOWTO-use-your-BlackBerry-as-a-us...

    JustCurious wrote:

    (2) I want to copy my address book from my phone on my computer, that I can see with some standard desktop application, any.

    (3) I want to copy my calendar so I can see it with some standard desktop application, any.

    See these:

    KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

    KB17022 How to set up BlackBerry Desktop Manager synchronization settings

    Good luck and let us know!

  • How to get the Date, month, year of the DateTimePicker

    Hi, I am using the DateTimePicker.

    There are several question about this command:

    1. how to get the Date, month and year?

    -With the help of myDateTime.value, I get this string ' Wed May 08 14:45 ICT 2013 '-> I have to manually analyze this? Because I need in format yyyy/mm/dd. Or can set the format of dateTimePicker.value?

    2 format on dateTimePicker self (on the user interface) is d/m/YY, I can't change to another format?

    Thank you

    dateTimePicker.value return a QDateTime not a string.

    https://developer.BlackBerry.com/Cascades/reference/bb__cascades__datetimepicker.html#property-value

    See more:

    https://developer.BlackBerry.com/Cascades/reference/QDateTime.html#date

    https://developer.BlackBerry.com/Cascades/reference/QDate.html

    You can get

    day = dateTimePicker.value.date().day()
month = dateTimePicker.value.date().month()
year= dateTimePicker.value.date().year()
dateYYYYMMDD = dateTimePicker.value.date().toString(Qt::ISODate)
dateYYYYMMDD2 = dateTimePicker.value.date().toString("YYYY/MM/DD")
dateYYYYMMDD3 = dateTimePicker.value.toString("YYYY/MM/DD")

  • How to get the date for the first Monday of each month

    Dear members,

    How to get the date for the first Monday of each month.

    I wrote the following code

    SELECT decode (to_char (trunc (sysdate + 30, 'MM'), 'DAY'), 'MONDAY', trunc (sysdate + 30, 'MM'), NEXT_DAY (trunc (sysdate + 30, 'MM'), "LUN")) FROM DUAL

    But he looks at complex bith.

    Abhishek

    Published by: 9999999 on 8 March 2013 04:30

    Use the IW format - it will make independent NLS solution. And all you need is truncated 7th day of each month using IW:

    select  sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
  from  dual
/

CURRENT_D FIRST_MON
--------- ---------
08-MAR-13 04-MAR-13

SQL>

    Here is the list of the first Monday of the month of this year:

    with t as(
          select  add_months(date '2013-1-1',level-1) dt
            from  dual
            connect by level <= 12
         )
select  dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
  from  t
/

FIRST_OF_ FIRST_MON
--------- ---------
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13

FIRST_OF_ FIRST_MON
--------- ---------
01-DEC-13 02-DEC-13

12 rows selected.

SQL>

    SY.

  • How to repeat the same line more than once in the report 10g

    How to repeat the same line more than once in the report 10g

    If I print the barcode more than once
    in the report;

    Published by: user11106555 on May 9, 2009 05:50

    OK, thought it was just a recording, then try:

    SELECT COL
  FROM TABLE,
       (SELECT 1
          FROM DUAL
         CONNECT BY ROWNUM

  • How to get the mobile applications other than phonegap Build Service apk file in Dreamweaver CM³

    How to get the mobile applications other than phonegap Build Service apk file in Dreamweaver CM³

    Dreamweaver is a tool, not an install Android of web authoring tool.

  • Is it possible to see/get the data from the table to a dump file

    I have files dmp generated using expdp on oracle 11 g...

    expdp_schemas_18MAY2013_1.dmp

    expdp_schemas_18MAY2013_2.dmp

    expdp_schemas_18MAY2013_3.dmp

    Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.

    VI test1.par

    USERID = "/ as sysdba".

    DIRECTORY = DATA

    dumpfile=expdp_schemas_18MAY2013%S.dmp

    SCHEMAS = USER1, USER2

    LOGFILE = user_dump_data.log

    SQLFILE = user_dump_data. SQL

    and impdp parfile = test1.par.

    No,

    DataPump cannot retrieve a dumpfile data in a flat file.

    Dean

  • Get the data from a virtual computer store

    I'm looking to get the data from a virtual computer store, but format to be used with vmrun.  My current vmrun statement is:

    vmrun t CR h < IPAddress > https://: 443/SDK u & lt; username & gt; Pei & lt; password & gt; runProgramInGuest "[& lt;. datastorename & gt;] & lt; datastorefolder & gt; / & lt; virtualmachinename & gt;. VMX' c:\myscript.bat

    The idea is to replace & lt; datastorename & gt; given with the name of the LUN that is running on a virtual machine.  In this case, I'm running my statement vmrun from inside a script PowerCLI.  I can use a variables powerCLI, if the vmrun instruction can take and use all escape sequences are needed to adapt the format vmrun to this argument.

    That is right.

    ____________

    Blog: LucD notes

    Twitter: lucd22

  • How to get the data in the table if the date is less - than two months from the current date?

    Hi all

    I have a requirement in to retrieve table data. If any of the basic date in the column data.

    I have a date field (expiration date) I need to display data which expires two months.

    Please give me a solution.

    Concerning

    Shankar

    Hi, Shankar,

    Sorry, we don't know what you want.

    If you want something which, when executed on March 13, 2014, finds all the lines where expires and is located between March 13, 2014 and may 13, 2014, inclusive,

    SELECT *- or whatever the columns that you want to

    FROM table_x

    WHERE expire > = TRUNC (SYSDATE)

    Maturity AND< add_months="" (trunc="" (sysdate)="" ,="" 2)="" +="">

    ;

    I hope that answers your question.

    If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

    Explain, using specific examples, how you get these results from these data.

    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002

  • How to insert into a GLOBAL TEMPORARY TABLE and get the data from it?

    The requrement is
    Split the string ENTRY point on the base and store it in a Collection. And the values of the collection will be stored in a global temporary table. Then, I'm updating some other table based on the data from the temporary table.

    There is in fact no error message. But there is no data in the temporary table and also no change in the update statement

    First of all, I'm creatiing a global temporary table only once outside the procedure.

    CREATE GLOBAL TEMPORARY table GLt (data_element number)


    create or replace procedure test_proc (p_in_string VARCHAR2) is
    i the number: = 0;
    number of POS: = 0;
    CLOB lv_str: = p_in_string;
    p_delim VARCHAR2 (1): = ', ';

    TYPE t_array IS TABLE OF VARCHAR2 (20) INDEX directory.
    t_array channels;

    BEGIN

    -cutting of string input and store in the strings (i) collection

    POS: = instr (lv_str, p_delim, 1, 1);
    WHILE (pos! = 0) LOOP
    i: = i + 1;
    Strings (i): = substr(lv_str,1,pos-1);
    lv_str: = substr (lv_str, pos + 1, length (lv_str));
    POS: = instr (lv_str, p_delim, 1, 1);
    IF pos = 0 THEN
    Strings (i + 1): = lv_str;
    END IF;
    END LOOP;

    run immediately "drop table TWG;
    run immediately ' CREATE GLOBAL TEMPORARY table (data_element number) TWG on commit preserve rows ";

    FORALL i in strings.first... Strings.Last
    INSERT INTO VALUES TWG (strings (i));
    commit;

    Update first_tbl set PIN is "XXX" where first_col in (select data_element from TWG);.
    commit;

    END test_proc;

    Published by: cedric b on January 25, 2013 12:59

    Remove the two execute immediate line. They are wrong.

    And then use the table in your code that you created at the beginning. The name is GLT.
    And delete the first commit. This validation would empty the temporary table of GLT.

    You get an error? Or it does not work as expected?

    Also, show how you call the procedure.

    Published by: Sven w. January 25, 2013 14:45

  • How can I get the data from the drive of barcodes to forms

    Hi Experts,

    Forms 6i

    I would like to collect data from the barcode scanner.

    No idea if you got it please share.

    Thanks in advance.

    Hello

    I think that his works even as the keyboard.  You type the code manually or you can read it from a scanner.  With the help of the keyboard that you can able to type what anyone on the position of the cursor, in the same way the barcode scanner also works.  Just like a copy and paste the scanner copies the data from the physical device and paste it into your corrent cursor position.  There is no separate program encodings necessary for this work.

  • How to get the dates of discontinuity

    If there is discontinuity in dates how we write the query...
    I need to get the dates and the dates of discontinuity.
    I / p:

    item_no first_date second_date
    1 January 1, 10 Aug 1, 10

    1-01 - 7.-10 1er January 11

    1 February 1, 11 1 July 11
    "
    "
    "
    o/p:

    1 1 January 10 01 - aug - 10

    1 02-aug-10 (first_date + 1) 31-aug-10(second_date-1) - dates of discontinuity

    1-01 - sep - 10 (second_date) 1st January 11

    1 January 2, 11 January 31, 11

    1 February 1, 11 1 July 11

    '
    '
    '
    Please let me know is possible 
    SQL> select  *
  2    from  tbl
  3  /

        ID FIRST_DAT SECOND_DA
---------- --------- ---------
         1 01-JAN-10 01-AUG-10
         1 01-SEP-10 01-JAN-11
         1 01-FEB-11 01-JUL-11

SQL> with t1 as (
  2              select  tbl.*,
  3                      lag(second_date) over(partition by id order by first_date) prev_second_date
  4                from  tbl
  5             ),
  6       t2 as (
  7               select  *
  8                 from  tbl
  9              union all
 10               select  id,
 11                       prev_second_date + 1,
 12                       first_date - 1
 13                 from  t1
 14                 where prev_second_date + 1 < first_date
 15             )
 16  select  *
 17    from  t2
 18    order by id,
 19             first_date
 20  /

        ID FIRST_DAT SECOND_DA
---------- --------- ---------
         1 01-JAN-10 01-AUG-10
         1 02-AUG-10 31-AUG-10
         1 01-SEP-10 01-JAN-11
         1 02-JAN-11 31-JAN-11
         1 01-FEB-11 01-JUL-11

SQL>

    SY.

  • How to get the data center moref moref VM in c# using

    Hi all

    Could someone tell how to get managedobjectreference of data center using the VM moref? or any other easy way is? If anyone has examples of code in c# please share with me?

    Thank you

    Vijaya

    You can get the data center in which the virtual machine resides by the following search:

    VM Moref-> Parent (vmFolder)

    Moref folder VM-> Parent (data center)

    Parent of the virtual computer object will always be the vmFolder and the vmFolder object will always be a data center.

    For more details on the model of article inventory of vSphere, take a look at this blog post - http://www.doublecloud.org/2010/03/vsphere-inventory-structure-deep-dive/

Maybe you are looking for

  • Java, completely broken on 41.0b1 x 64 (Win 7 Ultimate x 64)

    After the last update of this beta java version failed completely. I noticed when I tried to access a secure site which uses a Java plugin to start a remote desktop. At the start, he should ask if I want to run the Juniper configuration Applet, which

  • 2006 iMac does not start. Help restore

    I have an Intel iMac core duo with iSight and built in disk drive around 2006. It does not start. When I turn on, it sounds and passes to the gray screen with the apple logo and a progress bar or a spinning wheel. Then he stops down. I tried all the

  • New laptop Compaq 6730 b. Cannot start with DeskJet F4280 attached

    Recently bought a new laptop Compaq 6730 b.  Had the Deskjet F4280 all-in-one printer.  The drivers installed, and then connected a printer to the USB port on the laptop.  Laptop does not start except unplug printer USB.  This printer is not compatib

  • Satellite A300-177 advanced boot optoins

    I'm reastore pre-installed the software on my computer.I started the computer and you press F8 to enter advanced startup options, but there is no line "Repair your computer" in the menus.I did it 10 times. It's just not there.I also rebooted the comp

  • Print job never ends

    "I have a model HP OfficeJet Pro L7780 all-in-one ' Windows Vista 64-bit: the print job never ends when Intuit Quicken printing.