How to change the models of Calc Manager after the migration of HBR

Similar Questions

• Is it possible to include a model of calc Manager after an if condition in a rule of calc?

  Hello!

  I'm trying to create a rule that would first check if certain conditions (pitfall) are met.

  If the condition is true then the rule should go and calculate using a model with different parameters PDT.

  If the condition is not met, then something else is made.

  I test this because I should develop the same kind of solution for another case where the model is much more complicated. Basically, the problem is the same.

  Before you run a rule with a model, a condition to be tested and if the value of CAP are models of should not be executed.

  Here's the rule as we see calc (script edit mode) (Version 11.1.2.3) Manager

  ('Work'

  IF ("Volume"->"BegBalance"-> "DriverSelection"->"LOC"->"real"->"No_Product"->"No_Entity" <>6)

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  ON THE OTHER

  / * STARTCOMPONENT: FORMULA * /.

  "7654321"-> "BegBalance"->"LOC"->"real"->"No_Product"->"No_Entity" = 6;

  / * ENDCOMPONENT * /.

  ENDIF;

  );

  The explanation of the above rule:

  It should 1st check-if a Show Stopper has to value (6)

  If is not equal to 6, then it is and should be aggregations as expected.

  If the show stopper (can find value 6 to the intersection of the cross-dimension), then it should set 6 to another intersection as a control point.

  The model includes an aggregation that is made for different combinations.

  The model script is the following ([YearPara], [ScenarioPara] and [VersionPara] are promtps of design time that can be set when you use the template in a rule):

  Fix ([YearPara], [ScenarioPara], [VersionPara], "EUR")

  AGG (product, entity);

  endfix

  This rule does not, validate because the Manager of calc seems to find something wrong with the ")" at the end of the if condition. (line 2 to the rule)

  I see the calc Manager displays error messages that aren't the real cause of the problem.

  Is simply because the template has fixes and they occur after the fi condtion test?

  For comparison, I have a separate rule where I have only two lines:

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  This rule works without any problem.

  looking forward for your comments

  Kind regards

  user637777

  Hello!

  Had, it works:

  The reason for not working had patches after if test condition:

  Now the rule looks like this: (used a slightly altered version parameterless template)

  ('Work'

  IF ('Volume '->' BegBalance'-> ' DriverSelection '-'LOC'-> 'real'-'No_Product'-'No_Entity' > > > <> 6 ' ")

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]]))

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]]))

  ON THE OTHER

  / * STARTCOMPONENT:SCRIPT * /.

  "7654321"-> "BegBalance"-> "LOC"-> "'real '->' No_Product-> 'No_Entity' = 6;

  / * ENDCOMPONENT * /.

  ENDIF

  )

  Model is as follows:

  IF (@ISMBR ([ScenarioPara]-> [YearPara]))

  @IDESCENDANTS ("product");

  @IDESCENDANTS ("entity");

  ENDIF

  So resolved for this case...

  But the other cases I have bugs that I can't go around with IF (solution @ISMBR.

  Kind regards

  user637777

• My drop down bookmark does not offer 'manage bookmarks '. Support find Ican, is how to change the bookmarks. How can I find the link manage if this isn't in the menu drop-down?

  Question
  My drop down bookmark does not offer 'manage bookmarks '. All the support I can find that this is how to change the bookmarks. How can I find the link manage if this isn't in the drop-down list?

  In Firefox 4, "Organize bookmarks" was changed to "Show all bookmarks" to open the library window.

• How to change the unit cost of USD $ INR in vmware IT management.

  How to change the unit cost of USD $ INR in vmware IT management.

  in ITBM, console device itself will give you an option to change currency.

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to change the password of admin BI Publisher

  Hello.
  How to change the BI Publisher admin password?
  
  Thanks in advance

  In the Security Configuration open BIPublisher Admin, in the Security Center, where you can manage privileges.

  But change the admin password depends on what model of security you use for BI Publisher.

  If you use the BI server like security model, then BIPUblisher Admin password is the same as Server(answers/dahsborads) BI.

  Give me more details if you are not clear, what your needs are and why you want to change the BI publisher password.

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).

• Portege S100: How to change the RAID in the BIOS

  Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
  Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

  I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

  This is the same as that recorded in this link: -.
  [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

  I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

  Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
  The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

  If the second HDD was inserted and then change the RAID in the Windows operating system.
  There should be a Toshiba RAID Console.
  You can use this console to create or manage a RAID array.

  To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
  It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

  But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

• Satellite A500 - how to change the LED display?

  Hey.

  Does anyone have guide how to change the display LED of Toshiba Satellite a500?
  I tried irisvista.com but there is only a guide how to replace an optical drive in this model, but nothing on the screen.

  Thank you.

  Don t always start a new thread on the same topic.
  Please follow the firstto:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53875

• How to change the scale of the Dáil by programming when its reaches the minimum or maximum

  How to change the scale range Max and min of the Dáil when her reached to max or min value. For example: my dail has a max and min scale ranging from 0-15 once my dail value reached 15 I change my max and min beach at 15-30 and 30-45 nationally and also vice versa if I reach 30 it should return to 15-30 instead of 30-45... Then I tried some methods but its not working so can someone please provide a solution.

  Thank you

  Thanks Sabri,

  Vi what you have done is really useful that I can be able to understand the concept of managing my needs. I will attach the vi for reference, as its similar to replace the function of x scroll bar in the chart based on the button. This vi is the version of LabVIEW 2015.

• HOW TO CHANGE THE RESOLUTION SITES INTERNET/EXTERNAL MEMORY VIDEO

  HOW TO: CHANGE THE VIDEO RESOLUTION;
  CONVERT FILE FROM THE MEMORY OF SITES INTERNET/EXTERNAL TYPES

  Hello.. Please help me how to change the video resolutions
  any web address and the external memory that I wanted to save.

  Cannot show because all my videos that I save in and downloaded from PC are all
  whenever I play on my mobile. But it has an audio; so I guess it's the video resolution
  who will be re-size. Please help me on what I am new user in windows xp does not know how
  to resize the video or file conversion.

  THANKS IN ADVANCE. IMPATIENT FOR THERE!...: D

  Probably, you need to convert the video file format, not the resolution.

  As requested, if we know the type of phone (give us brand and model also) you have we can give a more specific answer, but I would perhaps plump to convert to 3gp format.

  Freemake is an excellent converter

  http://myvideoproblems.com/webpages/UsefulProgrammes.htm

• How to change the size of icons and windows

  original title: oversized windows and icons

  im stuck in something I don't know how to change, all my windows and icons are so big they tend to adapt to the screen and I know its something simple to fix but I can not find it ive tried all the display options and disabilities can't just can someone help me please

  Hello

   

  ·         Were there recent changes made on the computer before the show?

   

  Follow these steps and check if that helps:

   

  Step 1:

   

  (a) click on the tab "Start" then go to control panel. In the upper left corner, click 'Switch to Classic view'-, it will take only a few seconds until Windows in Classic view. In Classic view, you will see all of the icons that are currently on your desktop.

  (b) go to 'View' and the display properties box opens. On the appearance tab, press the 'Effects', uncheck 'Use large icons'. Press the OK button, and then click OK again in the display properties box. The icons will appear normal on your desktop.

   

   

  Step 2:

  (a) right click on your mouse and scroll down to "Properties". The display properties box will be pop up, so go to the appearance tab then click the "Advanced" button and look for "Item.

  (b) scroll to the bottom of the box and select "icon". Go to the 'size' change the default size, 32, for your icon. Press the button 'Apply' then 'OK '.

   

  See also:

   

  How to change the appearance of items on the desktop in Windows XP

  http://support.Microsoft.com/kb/310543

  Step 3:

  If the problem persists, update the latest graphics card drivers on the manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

• How to change the ip address of the printer

  How can I change the ip address that windows searches for what concerns my printer wireless?

  My printer continues to change its ip address that is to say yesterday that the address is 192.168.0.2 and now it's 102.168.0.5, and whenever he does, windows does not include only and that he keeps trying to print address ip to wring the origin install me the printer as a new one from the new ip address give me two of the same printers when I watch devices and printers.
  I would like to know just how to change the ip address that is referenced to the printer rather than install them separately as a new printer.
  Any ideas would be appreciated.

  I always prefer to set a static IP address for the network printers to avoid this kind of problem.   Depending on the brand of printer, this can be done by using the printers Panel (see networking options in the menus), or there may be a web interface, you can open in a browser.  Assigned address must be in the correct subnet but outside the DHCP in your router address.  Once assigned, specify this address in the settings of the printer on each workstation.
  You have not given any information re. the printer or your network and router model, so I can't be more specific than that, but it's the best general solution of this question.

• How to change the default font in the system in all parts completely

  Separated from this thread.

  First BIG THX for this post - helped me change the fonts almost all except those used by the modern UI in point 8.1 of Windows. Looks like the modern user interface to use 'Segoe UI Light' as default font, but it changes the way it changes only in the destop and not in the modern user interface.

  So someone knows how to change the font used in the modern user interface?

  Managed to achieve this:

  Screenshot

  In my view, there is a last default font used by the system, and everything I have to do is find his name and then just follow your steps again.

  Update:

  The font is arial. But when I change in the registry, the system takes a different default font - arial italic.

  How to prevent the system from changing the font to the next in the queue?

  Hi Dan,.

  You cannot change the font size in Windows modern user interface, it's by design. However, you can install a third-party application using your favorite search engine to change the fonts.

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful.

• How to change the settings of Windows 8 trackpad

  I have an Asus S400C with Windows 8 is installed and pain with my trackpad.

  I'm used to be able to scroll with two fingers on the trackpad, but this function seems to have completely abandoned.

  When I got my phone a few months ago, that this would work sporadically, but now nothing. I tried to hunt around in settings, etc. to see if it needs to be enabled/disabled, however I can not even find the trackpad settings! I searched touchpad/trackpad etc. and looked through the settings of the mouse, but none seem to control the current laptop keyboard. Instead, it maintains direct me to the tactile features on the current screen.

  I'm so use to scroll with one finger on my screen while using the mouse trackpad for other features...

  I tried to have some Google around for this online but everyone seems to have slightly different questions and no not to Asus - some answers have to give on the brand of computer - but wouldn't it be bound to the windows software and where touchpad info are stored?

  If anyone knows how to change the functions of the trackpad, or at least where to find who would be most appreciated!

  Thank you

  Hello

  There are several different manufacturers of the Trackpads. The computer manufacturer decides what trackpad to install based on compatibility with other hardware and software on the system.

  The computer manufacturer will include a utility for the trackpad, which is designed for this particular model options. It is usually a utility that adds a Trackpad tab in the Control Panel/mouse component, or it may be a separate control panel item.

  You must contact the Asus support for a solution.

  ASUSTeK Computer Inc. - Support - Knowledge S400CA:
  http://support.ASUS.com/knowledge.aspx?SLanguage=en&m=S400CA&p=3&s=481#troubleshooting

  ASUSTeK Computer Inc. - Support - Troubleshooting:

  http://support.ASUS.com/download/options.aspx?SLanguage=en&type=9

  This will have information on the hardware devices installed on this specific model and download the latest drivers.

  You can also discuss this issue with others who have this model.

  ASUSTeK Computer Inc. - Support Forums:

  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  Concerning