How to change the update channel?

Similar Questions

• E900 - how to change the wireless channel?

  Hello people!

  I just bought a router Linksys Cisco E900 and hooked it up to my cable Internet. The Internet service that gives me my ISP is PPPoE, fiberlink (100 Mbps).

  I did the whole upward. I've connected my computer (via Ethernet cable) and my laptop (via radio) to the router.

  Now... There are other networks wireless around me. The Wi - Fi channel that my fixed router 1 is apparently - he saw settings. But I can't find a menu anywhere in the gateway of the router (192.168.1.1) I can change the wireless channel bandwidth wireless etc. Can someone tell me if I can change them...? If so, how? If not... that the steering wheel...

  Thanks in advance.

  Check the screenshots below.

  

  

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• When you click on a tab open, how to do the update automatically in the body of the page?

  When you click on a tab open, how to do the update automatically in the body of the page?

  Right clicking on a tab open and using the arrow keys now now moves through open tabs. I liked the old versions where just after having clicked on a tab you can directly go to the page with the arrow keys to navigate.
  Y at - it something that I can change the subject: config to change this behavior?
  Thanks in advance.

  Firefox has yet to set the focus in the area of browser if you click on a tab.
  
  Only with very old browser versions you could set the focus to a tab by clicking a tab.

  This problem is probably caused by an extension.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite Pro C660-167: someone knows how to change the sensitivity of the keyboard?

  Anyone know how to change the sensitivity of the keyboard? Having real problems when entering laptop missing letters. !
  Very annoying!

  Hello

  I think that this problem could be solved by the BIOS updated.
  Please take a look on Toshiba European driver page and download the latest version of the BIOS.

  I read here in the forum to the similar topic with another series of notebook and the BIOS update does work.

  Good luck

• On Apple Watch, how to change the time when traveling to a different country, like London or Singapore?

  For Apple Watch, can someone please show me how to change the time on my watch when I travel to another country, like London or Singapore? Thank you.

  Hello

  When traveling to a different time zone, it is not necessary to manually change the time on Apple Watch.

  After turning off the flight on each of your iPhone and Apple Watch, the time on your watch can be updated automatically to reflect the local time.

  If it is not the case, try restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Yoga Tablet 2-1050 - how to change the fonts

  Hello

  Just bought my compressed Yoga 2-1050 and really like it. Updated to Android 5.0, and everything works great.

  A question, however: does anyone know how to change the font (not font size) on my device not rooted?

  Thank you!

  You can't change the fonts by default on an android device, except if the option has been enabled by the devs - in which case, it will be somewhere in the menu "settings".

  However, there are two workarounds:

  1. install another Launcher to game Google store. Different allow different settings such as the layouts of different menu, different fonts, Widgets, etc.

  2. the only other option is to root your device that belongs entirely to the user & one I wouldn't recommend it unless you know what you are doing and accept the fact that it is very easy to brick your device.
  You'll also voiding the warranty (dependent on country) Although some manufacturers are pretty lax on this and can do a RMA number.

  This is pretty much your only options in its current version.

• How to change the installer to be able to install the program even as a new product?

  Hello! I created distributive for my project and installed. Now, I want to install this program with fiew changes in the code, but as a new product. But the new program replaces an old. How to change the settings for the installer to create a distribution that allows to install this program as a new product without updating the old program?

  Thank you.

  You need to duplicate the installer:

  

  As a result the new GUID is generated, and you will get a new product

  Andrey.

• How to change the chart of FFT Power spectrum

  Hi all

  Could someone help me in Labview? I got a result as shown in Figure 1. However, I want the graph to resemble Figure 2 that we can define the range of frequencies for each channel in the y-axis and maintain the amplitude for the x axis.

  How to change the chart?

  Figure 1

  

  Figure 2

  I have the range of frequencies for each channel, which are:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Channel	Frequencies
  Channel 1	2401-2423
  Channel 2	2404-2428
  Channel 3	2411-2433
  Channel 4	2416-2438
  Channel 5	2421-2443
  Channel 6	2426-2448
  Channel 7	2431-2453
  Channel 8	2436-2458
  Channel 9	2441-2463
  Channel 10	2446-2468
  Channel 11	2451-2473

  Could only change the graphic on the front panel or have to change inside the block diagram?

  Your answer is really appreciated.

  Thanks & best regards.

  
  

• How to change the size of icons and windows

  original title: oversized windows and icons

  im stuck in something I don't know how to change, all my windows and icons are so big they tend to adapt to the screen and I know its something simple to fix but I can not find it ive tried all the display options and disabilities can't just can someone help me please

  Hello

   

  ·         Were there recent changes made on the computer before the show?

   

  Follow these steps and check if that helps:

   

  Step 1:

   

  (a) click on the tab "Start" then go to control panel. In the upper left corner, click 'Switch to Classic view'-, it will take only a few seconds until Windows in Classic view. In Classic view, you will see all of the icons that are currently on your desktop.

  (b) go to 'View' and the display properties box opens. On the appearance tab, press the 'Effects', uncheck 'Use large icons'. Press the OK button, and then click OK again in the display properties box. The icons will appear normal on your desktop.

   

   

  Step 2:

  (a) right click on your mouse and scroll down to "Properties". The display properties box will be pop up, so go to the appearance tab then click the "Advanced" button and look for "Item.

  (b) scroll to the bottom of the box and select "icon". Go to the 'size' change the default size, 32, for your icon. Press the button 'Apply' then 'OK '.

   

  See also:

   

  How to change the appearance of items on the desktop in Windows XP

  http://support.Microsoft.com/kb/310543

  Step 3:

  If the problem persists, update the latest graphics card drivers on the manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

• How to change the security settings on a wireless network

  I would change the existing network security settings to WPA2, AES, or at least from TKIP AES.

  I am familiar with access via browser to the router and how to change the settings of the router.

  My question is how to make this as painless as possible for the network.  Step by step would be great

  First of all, I guess I have to change the settings of the router using the computer running Easy Link Advisor?

  Do I then have to disconnect/reconnect this computer?

  Do I have to unplug all the other computers and then sign in again with the update settings?

  The change of security settings affect my print server?  If so, I put up from scratch in ELA?

  For the record, I have a WRT 300N and the print server is a 54g.

  Anyone who reads this can also focus on recent news.  Maybe not a big deal, but a WPA/TKIP vulnerabilities has been identified.

  Thanks in advance to anyone who responds.

  If you change the router's wireless security settings, it will affect all devices that connect wireless to the router. To change the settings, simply set until you want on the web interface of the router. Save the settings. You need not link to that Advisor. Direct access to the web interface of the router is sufficient and preferable.

  All devices configured to connect to this network should ask if they connect more. It depends on type of what you had before. If you have not used WPA2 or WPA before having to ask for the password. If you used the WPA or WPA2 with the same password that they cannot even ask the password. How it works in detail with a specific wireless device depends on the device and the software you use. Some devices may require you to first remove the network wireless in the list of "preferred networks" and then reconnect.

  Check the manual of the print server how to configure for the new security settings. You should be able to reconfigure the print server through a web interface. First, it is probably best to change the settings on the print server and then make the change on the router. Otherwise, you may have a hard time, connection to the print server to make the change. In addition, depending on how old the print server is that it cannot even support WPA2 and AES.

• How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  =================================
  Media Player Classic should read the .3gp files...

  Media PLayer Classic
  http://download.CNET.com/Media-Player-Classic/3000-2139_4-10518778.html

  For conversion... the following freeware can be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the
  main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to change the default value of MS Paint record - an output to jpg for shortcuts KEYBOARD: Alt-F-A (or S)?

  I've seen a lot of posts on this subject here, but they are all on the use of the mouse and I did not yet find one with an answer to MY specific dilemma.

  I take screenshots and edit photos (Nothing fancy) almost every day. Given that my physical disability in my arms causing me pain and discomfort when I use the mouse, I need to use several shortcuts as humanly possible help reduce the constant pain, I'm still in my right arm using the mouse.

  I *need* to know how to change the default hotkey Alt-F-A (or S) to save it as a JPG file relative to the current default value PNG which I use never, never. If it requires editing the registry, no problem, just point me in the right direction and guide me on how to do it.

  Thank you

  Lee

  LAST UPDATE 09/30/15 @ 16:54:

  The solution to my dilemma can be seen in my other thread (analogue/reprise). It is in case anyone in the future stumbles across this thread with the same problem and needs the answer.

  Since this thread will not be deleted, I would would add the link to the solution in case anyone stumbles across this in the future.

  See my other thread at: [Solution here]

• How to change the product ID of Windows 7, when you put the disc in the other PC

  I PC_1 with an SSD and a valid license of Windows 7 OEM (HP).  I want to put this SSD in a new, more powerful PC_2.  PC_2 holds a valid license of Windows 7 OEM (Packard Bell).

  My thoughts are:

  1 use Double driver to make a backup of all the PC_2 drivers.  Use ABR Activation Backup and Restore to save the certificate key and activation license for W7 on PC_2

  2 put the SSD in PC_2 and change the license key and activation of the certificate (it has the PC_1 keys/certificates) to the PC_2 keys/certificates

  3. install missing drivers to disk backup Double.

  The problem is How to change the key/certificate in step 2?

  Of course I could rebuild W7 on the SSD and give him the key to license PC_2 for the reconstruction, but that would mean reinstall all my other programs that I prefer not to do so.  I downloaded and still have, a copy of W7 iso website digitalrivers if this can help.

  Thank you

  Put the SSD from PC 1, PC 2 and startup, update drivers, and change it to the product key located on the certificate of authenticity.

  As long as they are running the same edition should not be a problem.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity