How to change Windows Sync dividing the folders and files in alphabetical order
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
- Windows Sync has divided the folders and subfolders in alphabetical ranking. I want my old transparent back and stopped synchronization partnerships. The only way that I can temporarily return the old display windows is to change the name of the folder. How can I stop Windows automatically it? Recent changes to your computer. I work towards a date limit and cannot stop windows from doing this and can not find an answer.
- I have tried going to the Sync Center, but impossible to find a solution. Even tried Sync delete but Windows does not allow this.
Try turning off the center of synchronization to run at startup as follows: http://www.vista4beginners.com/Disable-Sync-Center. In my opinion, who will take care of the problem.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.
original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself. You should check out.
When you say "change settings in both accounts' exactly what are the parameters what do you mean? It is normal that many Windows settings to be on a per user basis. For example. the desktop background is a 'definition' which is completely independent for each user. You cannot set up a wallpaper for a user and hope that it displays desktop of another user.
-
I'm as Windows 7 Home Premium 32-bit slot. All of a sudden I've locked the folders and files on my system. I am the administrator and the only user of my computer. What happened to cause this? How to unlock the files?
I right click on them and there is no label of 'ownership '.
Angi
Hello
· How do you lock the folders?
· The question came with all the files and folders?
Step 1: Here's how you can take ownership of the files/folders
a. right click on the file or folder and then click Properties.
b. click the Security tab.
c. click on a user name or group under group or user names.
http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions
Step 2: Run the fix it to http://support.microsoft.com/mats/windows_file_and_folder_diag/
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Easy transfer Windows spilled all my folders and files in the C: OS drive.
I don't know if I've done something right or if it is a real problem. I used my wired network and Windows Easy Transfer to transfer files and folders of old readers logics partioned 5 XP to my new family Win 7 Premium 64 bit, also with a hard drive partitioned. Transfer all the folders and files placed in the new Win 7 C: OS drive. What a nightmare! I had to return the computer to factory settings (out of the box) and all over again.
I should have been smarter. After all, how a stupid machine knowledge where to put each logical drives and folders without receiving instructions. But then it should have been a warning that the machine is not do miracles.
Caution: do not use Windows Easy Transfer if you have a partitioned hard drive.
Hello
Check out the link and send your comments.
http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1 -
I unflagged all the folders and files that I share on my home network, however, I am not able to rename them or save them on my PC from my laptop on my wireless network. This has happened since May 12 and I suspect an auto update changed or recover from something.
Running Vista Home Premium SP2 on PC
Laptop is Windows 7
Thanks for getting back to me Mick!
I did a restore to 5/10 when I had no problem, but the problem persisted.
I'll have to try Norton support. This may be something they did.
In the meantime, I managed to change the names of files by connecting to the PC with the account of my wife who as co-owner had equal rights and the sign of the laptop is its ID as well so it worked, but it isn't always fair.
Once again, thank you...
-
2 operating systems: Windows XP and Windows 7
Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!
Once, I opened a file from "My Documents" from XP in Windows 7.
But when I Wen back to Windows XP.
But while starting up, I got a lot of error messages:
Access denied!
When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.
But after I tried to void that lookt again to see if she had cancelled it.
But he remains unalterable reports!
I have lookt on Google and Bing, but could not find someone with the same problem!
Now it works!
I used these 10 steps to solve the problem!
10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):
1. press F8
2. select Safe Mode
3. log in with an administrator account
3. go into the properties of the folder / partition / file that you cannot access
4. Select security and then advanced
5. in 'owners' define yourself as an owner (if it is not defined)
6. click on 'Ok '.
7 configure yourself: make sure you clickt on the box "Total control" (allow)
8. click 'OK' and then 'apply '.
9 reboot
10. the test (if it still does not, try again a few times)
____________________________________________________________________________
And then it worked!
-
Non-alphabetique of the folders and files in Windows Explorer
Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?
Tuesday, September 25, 2012 16:52:36 + 0000, Condor1A wrote:
Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?
The order in which it appears is the order of your choice. To change the order,
Click the heading of the column that you want to sort. Click one
second time to change the Crescent in descending, or vice versa.Ken Blake, Microsoft MVP
-
Print out c: folders and files.
Such a command would be:
dir d:/press s > %userprofile%\Desktop\directory.txt
who will place the file on your desktop.
But you'll probably find Directory Karen printer is easier and more convenient to use.
-
This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
Any solution to this problem s.Dave
It's not a problem... it is a feature.
At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized. There are other methods available if you really don't want to do a write-protected file. The details are explained in the following Microsoft KB article. I recommend reading the article in full to understand what Microsoft did...
"You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
<>http://support.Microsoft.com/kb/326549 >HTH,
JW -
Windows does not recognize disks that are not 512 bytes per sector. Put readers at the point as unknown and I can't access it through the operating system. Is there something I can change to get Windows to recognize the disks that are not 512 bytes per sector?
Hello MetalRain,
Thank you for your message. Are you able to see the disks in disk management? Try the following:Click 'Start' > right click on 'My computer' > select 'manage '.Click on "disk management".On the right, you see your drive? If so, you can right click and it assign a drive letter.Now you should be able to close this window and you can format your drive to NTFS, you can specify to change the bytes per sector 512 if you wish as seen HERE.After assigning a drive letter, follow the steps below:Click "Start" > click "Run" > type cmd in the text field and press "Enter."In the command prompt, type format c:/FS: NTFS / a: 512 and press "Enter."Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I M working on windows 7 ultimate and I did not find any option to group files or folders in alphabetical order, as in windows XP for example A, B, C, D etc separately. Well, there is an option available to the group by name, but this option actually group the items in the collection from A to H, I I-P, Q - Z.
Please suggest me any option if they are available in this "Last" operating system, otherwise I'll have to go back to windows XP, because I have a lot of data in the range A - H, Q - P etc and I don't want to waste my time to find my articles in these piles (A - H, Q - P etc.)Please suggest.
I think that this changed with Vista, and there is no way to change this for theHow XP...I found this on Vista and I guess that's the same for Win 7...--Dave N.MS - MVP (Mail)Windows 7 Ultimate 64"Raj.Tones" wrote in messageNews: * e-mail address is removed from the privacy... *I M working on windows 7 ultimate and I didn't find any option groupfiles or folders in alphabetical order, just like in windows XP, i.e. A, B, C, D... etc. separately. Well, there is an option available to the group by name, butThis option is to group the items in the collection from A to H, I I-P, Q - Z.Please suggest me any option if they are available in this "Last" operating systemotherwise I'll have to go back to windows XP, because I have a lot ofgiven in the range A - H, Q - P etc and I don't want to waste my time to find myitems in these piles (A - H, Q - P etc.)Please suggest.Windows 7 Ultimate 64
-
Win 7, how to print a list of the folders and subfolders
I would like to print a list of directories, subdirectories, and files. See a suggestion to use the command line and an older method of BACK. Cannot get this to work. If nothing in Win 7 is there a free or paid for the third-party program that will accomplish what I need. Can not believe that there is nothing better than some old option BACK in Windows 7.
Hello
These should help:
How to save and print a list of directory for a file and the folder of Vista (Windows 7 is the)
same)
http://www.Vistax64.com/tutorials/114593-file-folder-directory-list-print-save.htmlHow to add view and directory of print in the context Menu in Vista and Windows 7 file
http://www.Vistax64.com/tutorials/146031-context-menu-add-view-print-file-directory.htmlUse this free program which is great:
KarenWare - printer - free directory
http://www.KarenWare.com/PowerTools/ptdirprn.aspHow to add the feature print directory for files in Windows XP, Windows Vista or Windows 7
http://support.Microsoft.com/default.aspx/KB/321379I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Irregular behavior of the task on all the folders and files list
Hello:
The list of tasks that appears as well as hyperlinks to content on each of the personal folders (My Documents, my pictures, and my music), corresponding to each of my accounts 3 user (an admin and two limited), appears the same when I opened to what that is (in 2 music management accounts) and management of images in third-party including their corresponding symbols or icons that are both listed in the list of tasks and in the window itself.
Even in the help and support center, general information, articles and tutorials, when I search for 'Folder My Documents', among the results displayed are "Introduction to My Pictures Folder" and clicking on it opens the tutorial for "Introduction to personal folders?
All files on my PC (including the local drive (preload (c)), are also affected, showing the only music management in all its parts.
The file and folder tasks (rename, copy, move, delete, etc.) in the drop-down menu when you select a folder or a file, are ok and works correctly.
So, how can I correct this irregular behavior? without having to reinstall Windows if you please...
Thank you and best regards.
RickCPRickCP-Windows XP Home Edition SP3
Hello
As I mentioned in my previous post, please create new account with administrator privileges and check if the problem persists. Follow the steps mentioned in the article below.
How to copy data from a corrupted to a new profile in Windows XP user profile
http://support.Microsoft.com/kb/811151
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
It seems impossible to display files and folders together in alphabetical order. Instead I see files first and then the files that I often (not always) want
I have sometimes seen them together but have no idea how this happens.
Ferrière
Hello Ferds,
In Windows Explorer, simply type an asterisk in the search engine to return all the files and folders in the folder parent. You can click on any column heading to sort the results in this column.
Mr. Doug in New Jersey
It is a good workaround (thanks Mr Wizard) If you want to view the files in this way - but the procedure does not correct how Explorer files are sorted in the records themselves. And you will have to do it every time you viewed a folder because the search procedure would not automatically from window to window transfer and may not be assigned to do.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
A copy of the folders and files on different disks.
I have 2 "My Documents files", C:\Users\etc-1 and 1 on one other player (e) where I have a lot of spare space. -most of the files are both places, but not all.
How to merge two files 1 and place it on E:\ My Documents? Then remove my Documents in C:\Users etc. ?
TonyxHallx
Click the Start button and click on your username at the top.
(My) right click files and select Properties.
Each file will have a section where you can redirect the folder default location recording,
It would be unwise to delete anything in the library.
Remove libraries,
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-do-i-remove-libraries-Favorites-from-Windows/6a52e21a-DACF-47cc-883E-cea9c6af8b2e#footerhttp://www.SevenForums.com/tutorials/35627-libraries-folder-add-remove-navigation-pane.html
More like x - p,
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-to-make-Windows-7-look-like-XP/257ad2da-B7E4-4CA4-9795-8da1db1429a7
Maybe you are looking for
-
HelloI just bought hp 14-Y002LA laptop but without memory. I tried to install the ddr3 memory and wifi only light is orange. If I turn on the laptop without flashes of lock memory num 3 times indicating that he has no recollection. I want to know wha
-
Change the elements of control Enum or ring gives weird dialogue
Whenever I did a right click on a control Enum or ring on my FP and choose Edit items... I see the following image. It's almost as if I'm missing a dll or something that shows the info to change the Page Properties dialog box elements. Any ideas?
-
I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with
-
17 - j153cl: HP Envy 17-j153cl BIOS password
Hello and thank you in advance for your time. Recently, I applied a BIOS update for my Envy laptop and after reboot wins the error that no boot device were found. When I tried to enter the BIOS using my previous password, I get an invalid password er
-
Windows 8 pro and windows desktop tile 7
I use Windows 8 Pro and whenever I click on a tile to program, it goes to the Windows 7 Desktop before opening. After I close the program (e.g. Microsoft Excel), I have to manually return to the screen of windows 8.