How to check & & condition in the output text

Similar Questions

• How to make connections on the outputs of the letter of wsn 3202?

  GOOG morning engineers,

  How to make connections on the outputs of the letter of wsn 3202?

  Sorry, I'm very confused by your response.

  You must not something on the power set by program, just connect a power supply to DIO power and mass of DIO.  Then your DIO lines should be able to output values.

  In addition, I think that you may need to configure the output line.  This would be by the project.  I don't remember what it is, but it should be in some menu properties (probably for the specific line of DIO).

• How to check latency between the ESX host and SAN

  How to check latency between the ESXi host and SAN

  Hi friend

  Below KB will solve your need:

  VMware KB: Using esxtop to identify problems of performance of storage to ESX / ESXi (several versions)

  Under discussion can help you get more insight:

  Best values LVAD/cmd (ESXTOP)?

  Learn ESXTOP @ latency:

  vCenter and Esxtop to storage i/o bottlenecks to avoid

  Very detailed blog on ESXTOP:

  http://www.yellow-bricks.com/ESXTOP/

• How to check that all the options enabled in Oracle Database EE

  Hello
  
  I'm new on OTN.
  
  How to check that all the options enabled in Oracle Database EE?
  
  Thank you
  Vincent

  Hello

  Select decode(detected_usages,0,2,1) nop,
  name, version, detected_usages, currently_used,
  to_char(first_usage_date,'DD/mm/YYYY') first_usage_date,
  to_char(last_usage_date,'DD/mm/YYYY') last_usage_date
  of dba_feature_usage_statistics
  order by nop, 1, 2
  Or

  v$ option view

  Thank you
  LaserSoft

• Conditional tags - how to exclude files from the output

  Hi all

  I am trying to exclude certain topics (books) of the generation by applying the conditional tags. It works very well and these books are excluded from the table of contents; However, section files are not excluded that the output size is exactly the same. The items I must exclude are huge video tutorials. It seems that HR changes only the TOC when applying conditional build tags.

  Any ideas how to ensure that the files of excluded topics are not in the output?

  Thank you

  Hello

  If the subjects are actually excluded or not depends on exactly where you added the conditional tags. If you haven't been tag elements of the table of contents, all that is remove entries from the table of contents.

  My suggestion is to wipe the table of Contents formatting per tag and add the tags to the subjects themselves. Then, they should be excluded. And when they are excluded, they will disappear also the table of contents.

  See you soon... Rick

• List of input values (multi-column) must return the output text once the value is selected

  Hello

  I am trying to achieve conditional:

  I create a searchVO(select '' empNumber from dual) - to accept the input value (name empNumber).

  I create empLovVO (select enum,ename, addr, city of emp). lov attached to empNumber (searchVO).

  In the list of values when I select a value (emp 1, a, xyz, abc), it must return the default aby associated with emp values 1 to my output texts

  the name of the EMP one.

  addr xyz

  City abc

  It should also automatically change the values if I select another empNumber.

  Please let me know how to achieve this.

  
  Thank you

  Firstly, for the searchVO, add a three other attributes, name, address, and City, the type of string:

  

  and make sure they are still editable:

  

  Then, you're mapped LOV enum attribute EmpNumber, right?

  Do similar for the newly created attributes, in the list of values dialog box validation:

  Ename--> name,

  --> addr addr,

  City--> City

  

  Then, just to show these attributes in the form of output text, and you'll get what you want...

• How to check and confirm the Nexus 1000V secondary work if primary goes off

  Hello

  I installed Nexus 1000V Primarry and secondary on different ESXis

  but I have to turn off the primary, how to ensure that the school will be in charge and usually have any disconnection

  the module displays them and seem to be ok

  any other checks to do before continuing?

  Thank you

  Use "show system redundancy status. You can also manually failover

  http://www.Cisco.com/en/us/docs/switches/Datacenter/nexus1000/SW/4_2_1_s_v_1_4/high_availability/configuration/guide/n1000v_ha_3system.html

  The output from the example:

  n1000v# show system redundancy status
  

  Redundancy role
  ---------------
  administrative: primary
  operational: primary
  

  Redundancy mode
  ---------------
  administrative: HA
  operational: HA

  This supervisor (sup-1)
  -----------------------
  Redundancy state: Active
  Supervisor state: Active
  Internal state: Active with HA standby
  

  Another supervisor (sup-2)

  ------------------------
  Redundancy state: Standby
  Supervisor state: HA standby
  Internal state: HA standby
  

• How to check quality of the image

  Hello. Im a graphic of small business start-up. I decide to try the software from Marcus to do my projects. My task; s is to make pdf from illustrator files and send them to the company of the printer to make copies. And I have a problem because the company printer won't print my files coz, they said ' you have too low quality images in your pdf, 300 dpi or more for this print in good quality. IM using illustrator to edit photos or add text to the bottom, then I .pdf file in illustrator.

  And my question is how to check the quality of the pasted image (example I go to file > new > ok > ctrl + v a few photos of the memory and how to check the dpi have this photo)

  In save the menu as a pdf, I have quality printer control

  Thank you answare. See you soon

  szeli,

  You should be able to see in the information palette/Panel (with the checked objects) Document.

  Your printer uses the wrong word when you ask a certain DPI in format PDF. It should be DPI (pixels instead of points).

  In addition, 300 PPI is far from being a generally applicable/required value. The required value depends on how it is printed.

  More is bound to tell about it.

• How to check and install the drivers for the card

  I wanted to play the game with my HP Compaq 8710p (Windows 7) and said that my video card driver and probably (other drivers noticed yet) are now uninstalled in my
  System. Could you please send me
  links on how to check the
  uninstalled the drivers and how to
  Download and install. Thank you
  in anticipation of the command prompt
  response.

  Zubyjoe

  Your uninstall information

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  or use Revo Uninstaller

  http://www.revouninstaller.com/

  New Nvidia driver

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61072.exe

  Other drivers

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3355688&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Groovy expression in the output text

  Hi all

  I want to use groovy expression in the output as text

  < af:outputFormatted value = "#{adf.currentDate}" id = "2" / > "

  < af:outputFormatted value = "#{adf.userSession.userData.user}" id = "2" / > "

  but the values are not seen at the exit and the value to the property inspector area becomes red...

  This is because groovy can be used on the side of the model. For the user interface, you use the expression language.

  For the user, you can use adfsecurity information (control http://docs.oracle.com/cd/E14571_01/web.1111/b31974/adding_security.htm#CHDFFGDJ)

  To date, you must implement a bean method that you call via EL.

  Timo

• How to make a haircut the distorted text

  Hello

  IM sitting here with a logo with the text distorted a square on top.

  My problem is that I need to make a cut of the deformed text, so that the text becomes transparent like the background.

  But everything I've tried, who works on the normal text, does not work on something in an envelope.

  Is it possible that can do this job?

  Sincerely

  Charlotte

  Charlotte,

  If I (put) understand, you want to have the place with a cut out in the shape of distorted Type.

  You can get this look of fully reversible way using direct Type as follows, if the warped Type is black (you can change it to black):

  (1) select the distorted Type and the place;

  (2) in the transparency palette flyout click unchecked with mask invert both Clip opacity mask.

  Opacity masks are appearance, unlimited by what they are made, and they can be used more or less as photo filters and also reverse. Basically, everything is determined by the value of (equivalent) gray (range) of objects hiding, in other words, the (equivalent) value between black and white. Many objects can be grouped together and work as one. You can see everything by checking / unchecking Clip and invert the mask (four combinations) in a number of cases.

• Impossible to activate and deactivate the button "submit" all keeping the condition on the output parameter

  Hello

  I try to enable and disable the submit button based on the status of output parameter that I call in lov.

  Concerning

  Asia.

  
  

  Hi AJ,.

  Thanks for the reply

  I tried the method above, but it does not work.

  I am trying to enable and disable the submit button based on two input parameters and an output parameter.

  Based on two input parameters, I'm able to get the output parameter, and if the output parameter is "S" then iam allowing the submit button.

  on the other

  disable the submit button.

  Here is my code:

  IAM calling this co

  OASubmitButtonBean submitbean = (OASubmitButtonBean) webBean.findChildRecursive ("Submit");

  String crreason = pageContext.getParameter ("Reason")';

  Invnum string = pageContext.getParameter ("InvoiceNumber");

  String status = "";

  String ValidationDesc ="";

  OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl) getTransaction ();

  Try

  {

  String sql_qry = "BEGIN WEPIS_CM_DM_PKG. WEPIS_CM_RAISE_VALIDATION (P_CM_REASON =>: 1, P_INVOICE =>: 2, P_VALDIDATION_S "+)

  "(TS =>: 3, P_VALDIDATION_DESC =>: 4); END; « ;

  OracleCallableStatement sqlstmt = (OracleCallableStatement) oadbtransactionimpl.createCallableStatement (sql_qry,-1);

  sqlstmt.setString(1,crreason);

  sqlstmt.setString(2,invnum);

  sqlstmt.registerOutParameter(3,Types.CHAR);

  sqlstmt.registerOutParameter(4,Types.VARCHAR);

  sqlstmt. Execute();

  status = sqlstmt.getString (3);

  ValidationDesc = sqlstmt.getString (4);

  If ("S".equals (status))

  {

  submitbean.setRendered (true);

  }

  on the other

  {

  submitbean.setRendered (false);

  }

  }

  catch (SQLException sqlexception)

  {

  throw OAException.wrapperException (sqlexception);

  }

  catch (System.Exception Exception)

  {

  throw OAException.wrapperException (exception);

  }

  Concerning

  S.Asia

• How to avoid conditionally display the values of particular element

  Hello friends,
  My requirement is like I have a groupname xml element that I'm bundling by as well as another element.
  Now, I do not want to display all the special items associated with GroupName = 'BOTTLE '. How to specify it in the model?
  any help would be appreciated
  
  Thanks in advance

  You can use

  Please note that only TOTAL_COST and GroupName must be in the same group. Otherwise, you may need to use XPATH.

  Concerning
  Charlotte

• How to create and apply a condition to the selected text?

  Hi all

  I am new to Scripting InDesign. I use Flex 4.6, so I use ActionScript. I want to apply the conditional text in some text selected in my document. I understand the process manually. But I'm problem do it programmatically.

  I see that there is a Condition class. I created an object of this class and tried to set some values.

  var nameCondition = new Condition();

  nameCondition.indicatorMethod = ConditionIndicatorMethod.USE_UNDERLINE;

  nameCondition.label = "name";  Could not understand what label is synonymous with

  nameCondition.name = "name";

  nameCondition.visible = false;

  Now, when I debug, I see that the values that I have assigned to the object nameCondition are never affected.

  Also, I came across the appliedConditions method that is available in the app and doc. But I don't know how to use it.

  Help, please.

  Hi poortip87,

  Find the code JS, his work below InDesign CS5.5 only.

  var myDoc = app.activeDocument;
  try{
      myDoc.conditions.add({name:"TEST", indicatorColor:UIColors.GOLD, indicatorMethod:ConditionIndicatorMethod.USE_HIGHLIGHT, visible:false})
      }catch(e){}
  
  app.selection[0].applyConditions(myDoc.conditions.itemByName("TEST"));
  

  THX,

  csm_phil

• 1013 JDev how 2 display number on a specific attribute on the output text table?

  Page 1: I created a form of parameter with 7 top search criteria fields and table of results of search or a Table read-only ADF downstairs. The setting is based on the application of top link where each parameter is as the corresponding field in a table and works very well!
  
  For Page 2: I want the page looking at the same research, same parameter table of search results albums and even down with the addition of display also count on a particular area so that when someone enters data into the fields of setting up, he would always check the table and show the results of all fields, but in the last column do a count on this field (totally separate from the default number of records to search entire JDEV).
  
  Is it possible to create as a count or count (*) function at the level of the line of text out? I tried to create a view based on a Select sql statement a, b, c, d, count (e) table, group by a, b, c, d, e and when I dragg this object that contains this sql statement from the data control panel, it gives me the correct regulation of all areas, including the last column to display the number of records for this field , but together does never change based on what has been entered in the parameter, it is as if he is not yet connected to it. For ex: I want to display the number of all students within the setting of the East region, on the contrary it shows total number for all regions, not specific to East.

  Hello:

  I worked on a very simple application form ADF search against table Scott.emp in the Oracle database.
  Now I see what you mean. The idea is probably you shouldn't directly drag and drop control of your data: directly in your jspx as «ADF search form» Here are the steps:
  (1) create your entity object, the view object and I'm in the model layer; (You have already done this, you do not have entity and your view may come of TopLink request;)
  2) double-click the View object in your project of "model"; Add a connection variable: type Bind_deptno Number. It's read in a number of dept on the search engine;
  (3) change the SQL statement of the Emp View object on the same place as 2); WHERE Emp.Deptno = NVL (: Bind_deptno, Emp.Deptno) this indicates ADF if the binding variable is bound to a value
  then use this value, or if it is null, just ignore it. That's the tricky part;
  (4) create a new JSF called "Search.jsp', which will be the search engine;
  (5) from App Module, select EmpView1 (EmpView is updatable, EmpView1 is read-only, but it is not serious on the research plan), drag and drop the EmpView1 on your
  Search.jsp as an array of the ADF (not a search ADF form). This ADF table then displays the result of the research;
  (6) of the control Module of the App, go to EmpView1 data, drag and drop a "ExecuteWithParams" on your search engine like settings-> parameter ADF
  Form, this will tell ADF you want to set the variable binding as an executable looking for shape parameter.
  That's all! and you're good to go. Do the same for the other variable binding (you have 7 search criteria, so you have set 7 bind variable by using the same logic here.
  Good luck and don't forget to mark my answer as "correct" it to make me a few partitions.

  Best regards
  Alex IBE