How to check if the printer works.
They gave me printet 720C en with empty cartridges. I connected the printer. But when I try to print nothing happens. Not at least the paper to go so I can see if the printer works? I do not like to spend money for the ink and then discover the printer does not work.
VDV
OK, some are progressing. The Red blinking light may indicate a number of things, but printing will not happen in this case. I would start by clean cartrdige contacts, as shown here.
If that does not solve the problem then see the page here.
There is not low on ink or another indicator for the Deskjet 720 that could prevent printing (or at least going through the motions) with a cartridge empty. The printer does an electric test of cartridges before printing to that there are no problems might damage the printer control electronics. The printer will also check and make sure that the cartridges are installed, this model cannot work without both cartridges.
Tags: HP Printers
Similar Questions
-
How to check if the deduplication works correctly
Hi all
I understand that deduplication securefile is for the same column. Suppose if I have 2 identical data in a column, say one, with the size of 4000 bytes, the deduplication makes stores only 4000 bytes instead of 8 000 bytes table. From sqlplus, how can I check if this particular column takes only space to 4000 bytes instead of 8000?
Kind regards
ValValerie Debonair wrote:
How can I check if this particular column takes only space to 4000 bytes instead of 8000?
You can't exactly check without looking at the discharge of the LOB segment. It is easier to just check LOG segment does not increase when you insert the same LOB values:
SQL> DROP TABLE T1 2 / Table dropped. SQL> CREATE TABLE t1( 2 C CLOB 3 ) 4 LOB(C) STORE AS SECUREFILE 5 / Table created. SQL> SELECT SEGMENT_NAME 2 FROM USER_LOBS 3 WHERE TABLE_NAME = 'T1' 4 AND COLUMN_NAME = 'C' 5 / SEGMENT_NAME ------------------------------ SYS_LOB0000077372C00001$$ SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 / 1 row created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$' 4 / BYTES ---------- 1245184 SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 CONNECT BY LEVEL <= 100 6 / 100 rows created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$' 4 / BYTES ---------- 2293760 SQL> DROP TABLE T1 2 / Table dropped. SQL> CREATE TABLE t1( 2 C CLOB 3 ) 4 LOB(C) STORE AS SECUREFILE( 5 DEDUPLICATE 6 ) 7 / Table created. SQL> SELECT SEGMENT_NAME 2 FROM USER_LOBS 3 WHERE TABLE_NAME = 'T1' 4 AND COLUMN_NAME = 'C' 5 / SEGMENT_NAME ------------------------------ SYS_LOB0000077375C00001$$ SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 / 1 row created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$' 4 / BYTES ---------- 1179648 SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 CONNECT BY LEVEL <= 100 6 / 100 rows created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$' 4 / BYTES ---------- 1179648 SQL>
SY.
-
How to check if the indexer works?
The problem I have is that it generates a lot of disk activity. If I do works that are heavy on the use of the disc, it becomes almost impossible to work.
Is it possible to control when the indexer runs in the background? I can work in two ways.
1. If a process of a given name is in CPU, run no indexer
2 in some window of time, don't throw an indexer (indexer or limited only to run in a window of time)
Thank you
Hello
Thank you for your response.
You can always return to your default configuration by disabling the additional folder that you added to the indexed location (-> Panel-> option change indexing) and rebuild the index (Control Panel-> option-> Advanced Indexing - > rebuild). Indexing of the entire system can lead to search huge index of data which may result from eating up your hard drive space and slow down your system.
If the issue still persists I would say you are referring to the link below:
See Mike Hall responded on 15 March 2012
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/does-Windows-search-indexing-really-slow-down-PC/1bd40e28-a1ef-486b-9246-867200139b81Hope this information helps and if you have other questions related to Windows do not hesitate to post on Microsoft Community, we will be happy to help you.
-
My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly
You can try this download. Etrecheck. https://etrecheck.com/#about
Then publish the report as a reply in this thread.
It will allow us to review your system without disclosing a private matter.
-
How to make the printer work with the new Windows 7 laptop?
can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!
Thank youneed help with my printerHi gingerbabe001,
To set up and install your printer, see the link below.
Good luck.
-
How can I check if the hardware works correctly?
How can I check if the hardware works correctly?... including fans, hard drive, cd players, etc...
Hello
I suggest you to generate system health report to check if the system is working properly. To run the system health report, follow the steps below.
1. click on start
2. go in Control Panel
3 go to the Tools and performance information
4 search for Advanced Tools in the left panel of the window.
5 go to generate a system health report
You can also check the material status of the devices in the Device Manager. Follow the link for more information on the Manager of devices below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
-
Printer Dell 1100 printed in white when I am on the internet and I want to print any page. The printer works in the office.
I need help please
If it is printed in white on white paper how you see it?
Check your printers settings in his program in place.
-
The printer works, but does not print--just a blank page comes out.
How can I make the printer actually print. It was working a few minutes ago... then he started printing in green. Is there a place to check the color? I wanted to print something from black, and then it does not print at all.
Hello
What is the brand and model of the printer?
Try the steps in the following methods and check the status of the issue.
Method 1:
Run the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Method 2:
Printer in Windows problems.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
Re: Satellite A300 - how can I make the webcam work on Win7
Hello everyone.
I had Win Vista installed on this Satellite A300 and it worked well.
I had no problem at all.Then I moved to Win7 and now I'm going through the test of the work of webcam.
I tried to install all types of drivers, even those for A500, but it would be of no use.So, how can I make the webcam work on my A300?
I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.
I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(Thanks in advance,
Ozma.
Hello
Seems the webcam software has not been installed correctly.
That Win 7 OS do you use? 32-bit or 64-bit?Here you can find Chicony webcam driver for Win 7 64 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zipand here you can find Chicony webcam driver for Win 7 32 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zipGood luck
-
I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?
Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install. When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces. Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.
Open a command prompt window (start > run > cmd > OK)
Type the following line in the black command prompt window and press enterdependent on the spooler of sc config = RPCSS
Note that there is no space before the = but there is a space after it.
Restart the computer.
See the instructions on One Article to do a clean installation of your printer.
After the restart, you can check that the print spooler has started in several ways. One way is:
Open a command prompt window and type the following command, and then press ENTER:
spooler request SC
You should see the following in the command prompt window:
spooler request SC
Service_Name: Spooler
TYPE: 110 WIN32_OWN_PROCESS (interactive)
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0 -
How can I stop the printer to print an information page after each print job
Original title: print
How can I stop the printer to print an information page after each print job
Word 2007
- Click the Microsoft Office button, and then click Word Options.
- In the Print Options area, clear the print document properties check box, and then click OK.
Word 2000, 2002 and 2003
- On the Tools menu, click Options, and then click the print tab.
- In the Include document box, clear the check box Of the Document properties , and then click OK.
-
HP Officejet Pro 8500 best has come out very low but the printer works fine.
I was always able to make great copies. The quality of the document that I copy is excellent and I've copied before. Now everything I copy is very low and cannot be read. The printer works without any problem.
Hey 1265yankee,
I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one. Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?
- Unplug the printer while on
- Unplug the other end of the power cord from the wall jack directly
- Wait 30 to 60 seconds
- Plug the unit back to
Also, take a look at the steps in the document found here. The document is not directly applicable in the present case, but the steps are the same for your question.
Let me know how it goes. If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.
-
How to check if BI Scheduler works or not?
How to check if BI Scheduler works or not?How to check if BI Scheduler works or not?
Check the log file
tail-f
/OracleBI/server/Log/*NQScheduler.log* -
How to check if the persistence Unit objects are persistent or not?
How to check if the persistence Unit objects are persistent or not?
I have correctly set up and deploy the object used as a persistence in Oracle coherence unit according to the guide Chapter 6 of tutorial for Oracle coherence 3.5
Using the RunEmployeeExample script, I had good results. I see that once the cache object is updated, the database table (employees) is also updated accordingly. Here is the result:
But I can't check whether the persistence unit is still persistent.2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1 2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb er 1 2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]} 2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se nior member 1 2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed Cache: sending ServiceConfigSync containing 258 entries to Member 2 2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu tion due to 1 pending configuration updates [EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097 [EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful 2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou t of 257 primary partitions to member 2 requesting 128 2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou t of 129 partitions to a node-safe backup 1 at member 2 (under 129) 2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2 2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r equest 2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member 1 2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni or member 1 2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1 2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup 128 partitions 2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7 , 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4 4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80 , 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11 3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s enior member 1 2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me mber 1 2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]} 2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen ior member 2
Published by: jetq on November 5, 2009 11:49Re:
Does the above result shows that the persistence work is finished successfully?
Yes, it's nice. What is persistence. These are the characteristics of persistence.
Junez
-
I had to remove the drivers and the software once. I have re-installed, but now the printer works fine and when I try to run a scan of the computer or the printer they don't know each other and I can't scan.
It fixed... I had asked a computer specialist to look at and he cheated by creating IP port and tell the PC to print via the port. Although the sweep of the network was suspended on that port. Installed the printer via a USB cable and then removed from the printer and reomved first which stood on the IP port. Once it is I installed the printer again and scan network found the printer immediately and went big.
Maybe you are looking for
-
Firefox crashes repeatedly. Please helpe
Firefox crashes repeatedlyCrash ID: bp-0d558271-ea4d-42ca-b561-528c02131003
-
Audio drivers T42 2373 (XP)
Hello I need to find the correct audio drivers for this baby. The Lenovo provided a (1ga241ww.exe) does not work - it does not recognize the audio material. The device in question seems to be a multimedia audio controller, Code provider 8086, dev id
-
Get a time indicator Relative to display ZERO
Greetings, I'm having a hard time finding solid answers on indicators how digital with a relative time display mode work. I was looking for help online, I searched the forums and I googled like crazy. No simple answer to what seems not like a simpl
-
T61 - Win7 I have a ~ 90 GB, 7200 RPM drive. If I had to significantly increase the disk size is the only realistic option, replacing the current drive with a new one? I think remember me the possibility of a second drive at the time of the purchase,
-
I sent my Playbook app that I created using the APK for BAR converter, I used an AIR for android app in the converter, but my app was rejected because she asked the installation of adobe AIR. I then created the app just for the Playbook, no Android