The printer works, but does not print--just a blank page comes out.

Similar Questions

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.

• I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Plays in the video source, but does not allow me to change on the time line with the. MXF files.

  I use creative cloud of Adobe Premiere Pro and it does not allow me to drag. In the line of time, only the audio files of the video MXF files. Video plays in the source window, but does not to drag me and thenedit on the time line with the. MXF files. audio will slide to the time line, but not the video. Interestingly, not later than end of December 2015 it allowed me to change with .mxf files, but no, it won't. Any help out there?

  Neil, get it fixed, I do not have the video channels set correctly on the left

  side of the line of the time. Learn the new adobe; Thank you

  Monday, February 15, 2016 13:20, R Neil Haugen [email protected]>

• New document opens in the layers panel, but does not appear in the workspace

  new document opens in the layers panel, but does not appear in the workspace

  Could you please reset the Photoshop preferences once.

  Preference file functions, names, places | Photoshop CC 2014

• I bought creative cloud + 500px great, have the activation code, but does not know where to enter. Can someone tell me what to do?

  I bought creative cloud + 500px great, have the activation code, but does not know where to enter. Can someone tell me what to do?

  Please see the link How to activate/use Adobe CC Redemption Code

  Hope this will help you.

  Kind regards

  Hervé Khare

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Adobe Photoshop CC 2015 is compatible with Windows 10. The mine opens, but does not seem to work correctly... INCREDIBLY slow. Does not. Must I return to Windows 8?

  Adobe photoshop cc 2015 is compatible with windows 10? Just upgraded Windows 8 and PS opens but does not work properly. INCREDIBLY SLOW. What I can do or should I return to Windows 8? Windows love 10. Disappointed.

  Hi Ravenm,

  Could you please check and make sure that Photoshop is updated to the latest version 2015.1.2

  Also, please try the steps in the following article: Optimize performance Adobe Photoshop CC

  Let me know if it helps.

  Concerning

  Tanuj

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• My storm blackBerry smartphones comes on the screen upward, but does not show a picture!

  My storm blackberry 9530 recently fell to the ground, but nothing happened. But today its very slow and most of the time the screen turns on but does not display any image at all, just a black screen

  What can I do?

  Hi Mxgaudelli,

  Welcome to the BB Community Forum...

  There seems to be a hardware problem... have u tried a reboot of your BB battery pull, if you have not then try it once... If the problem persists, I recommend you to visit a centre of Service of BB and they have a quick glance at your question...

• First SDL application on the playbook, builds, but does not create a binary file.

  /*This source code copyrighted by Lazy Foo' Productions (2004-2012)
  and may not be redestributed without written permission.*/
  
  //Include SDL functions and datatypes
  #include "SDL.h"
  
  int main( int argc, char* args[] )
  {
      //The images
      SDL_Surface* hello = NULL;
      SDL_Surface* screen = NULL;
  
      //Start SDL
      SDL_Init( SDL_INIT_EVERYTHING );
  
      //Set up screen
      screen = SDL_SetVideoMode( 640, 480, 32, SDL_SWSURFACE );
  
      //Load image
      hello = SDL_LoadBMP( "hello.bmp" );
  
      //Apply image to screen
      SDL_BlitSurface( hello, NULL, screen, NULL );
  
      //Update Screen
      SDL_Flip( screen );
  
      //Pause
      SDL_Delay( 2000 );
  
      //Free the loaded image
      SDL_FreeSurface( hello );
  
      //Quit SDL
      SDL_Quit();
  
      return 0;
  }
  

  This generates without error, but does not generate a binary file to get started. Only a .o

  Any suggestions?

  EDIT: I am also including TCO with her. It's trip over. Did I miss something in my code for TCO runs correctly?

  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_read_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlStrncasecmp'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlDocGetRootElement'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_init_io'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_height'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_width'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_info_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_tRNS_to_alpha'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_longjmp_fn'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_image'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_palette_to_rgb'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlReadFile'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlFreeDoc'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_info'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_bgr'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlCleanupParser'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_destroy_read_struct'
  

  EDIT: missed me png and xml2

  It seems to be missing the library 'png' on the link phase. Can you confirm for me that the link against it?

  Go into the settings of your project, build C/c++, select tab "settings of the tool. You will see the folders 'QCC Linker, libraries' on the list. You must have "png" it.

  Another way to check is when you compile look at the last line (the link phase, starting with "qcc o", you should see a '-lpng ' modifier.)

• I have CS4 and updated my OS x 7.5 in Yosemite 10.5 - applications are still there but will not open. He said that I had to restart the computer after which he said that there is an error 6. I have the license key but does not have a place to insert it.

  I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the

  Original key, but does not have a place to enter.

  We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Works of scan, print says it works but does not work

  Hi all! Everyone seems to have the opposite problem - wireless printing, but the scan is not. Not me! I choose "scan" of my printer OR computer interface and it starts right up. Problem is, when I go to print it crosses the 'impression' screen, then said "finished printing" (no crash, error, or something in the queue to delete - it's in the queue, then it disappears as if printed), but no results of the company at the end of the printer!

  Before ask you, yes the printer works (print from a card SD inserted directly on the printer, or old computers connected via a network). Yes, I turned everything and turn it back on. Yes I tried to download printing HP & scan doctor, and he said all right, see ink levels etc, but its test page like any other print job. Yes I deleted the whole HP and re downloaded and searched/connected my computer via the wireless network. And, as previously mentioned, it scans. Oh and tells me that my ink level! Clearly, there is communication, but not for that. What weird sous-parametre I'm missing?

  And also, if you can solve this problem, can you give me an idea if it's going to suddenly begins to print 80 pages or I tried to beam on, so I can stop it? : )

  Thank you muchly!

  Hi @theshrew

  Please try bypassing the spooler to see if you can print directly to the printer.

  1. click on start and go to devices and printers.
  2. right click on the printer and click on printer properties.
  3. choose the option "print directly to the printer.
  4. click on apply and then OK.

  If it works, follow the following steps and try printing again.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the Run dialog box

  • Type services.msc and press enter
  • Locate the print spooler and double-click it to open the spooler properties
  • Make sure you that Startup type is set to automatic, if not please click the menu down and select automatic
  • Under Service status, please stop the server, wait a moment, and then click Start

  If bypassing the spooler does not have a feel successful, let me know.

  Also, what model of printer do you have?  How can I find my model number or product number?

  You get an error message, or print a blank page? More detail I have better